Håkon, Thanks for your work on this. Most helpful. I have broken vehicle.{h,c} at the moment, trying to get the OBDII polling stuff working. I'll merge your changes in later this week. Regards, Mark. P.S. Who'd have guessed that "+" has higher precedence than "<<", and that I'd waste 3 nights of my life chasing down a stack corruption in an interrupt handler :-( On 14 Nov, 2013, at 4:39 pm, Håkon Markussen <hakon.markussen@gmail.com> wrote:
Testing of false 12V alerts was successfully. No false notifications has arrived from my Think City.
The conclusion is that car_doors1bits.CarON and car_doors5bits.Charging12V have to be correctly sett according to the 12V-battery charging state and car-state (in the vehicle-specific file).
No changes have to be made at net.c (car_12vline_ref -15).
Br. Håkon
2013/11/13 Håkon Markussen <hakon.markussen@gmail.com> I have now rolled back locally the net.c to «car_12vline_ref - 15» and added car_doors1bits.CarON = 0; car_doors5bits.Charging12V = 0; to vehicle_thinkcity.c when: - discharge is not allowed AND charge is not enabled
In addition to car_doors5bits.Charging12V = 1; when: - charge is enabled - End of Charge is detected AND plug is attached
Some quick tests gives positive result that no 12V Critical Alert is send. I’ll keep you posted.
Br. Håkon
13. nov. 2013 kl. 08:51 skrev Håkon Markussen <hakon.markussen@gmail.com>:
False 12V alerts disappeared when triggering alert from ref - 2,0V.
// Trigger 12V alert if voltage <= ref - 1.5 V: if (!(can_minSOCnotified & CAN_MINSOC_ALERT_12V) && (car_12vline <= (car_12vline_ref - 20))) { can_minSOCnotified |= CAN_MINSOC_ALERT_12V; net_req_notification(NET_ NOTIFY_12VLOW); }
Br. Håkon
2013/11/12 Håkon Markussen <hakon.markussen@gmail.com> When setting Notifications (parameter #3) to "IP" or "SMSIP" I finally receive alerts - including Minimum SOC (feature #9) ;)
The 12V Critical Alert triggers quite often, even if my 12V-battery is new and in top condition. I've measured that the car_12vline reports ~0,5V less than the real battery voltage, so I plan to change the file net.c (line 1458) from:
// Trigger 12V alert if voltage <= ref - 1.5 V: if (!(can_minSOCnotified & CAN_MINSOC_ALERT_12V) && (car_12vline <= (car_12vline_ref - 15))) { can_minSOCnotified |= CAN_MINSOC_ALERT_12V; net_req_notification(NET_NOTIFY_12VLOW); }
to:
// Trigger 12V alert if voltage <= ref - 1.5 V: if (!(can_minSOCnotified & CAN_MINSOC_ALERT_12V) && (car_12vline <= (car_12vline_ref - 20))) { can_minSOCnotified |= CAN_MINSOC_ALERT_12V; net_req_notification(NET_NOTIFY_12VLOW); }
and compile it to a local hex-build and test in on my Think City. Keep you posted about the result.
Best regards. Håkon
2013/10/30 Mark Webb-Johnson <mark@webb-johnson.net>
Can someone try it at 2.0V (rather than 1.5V) and see if it solves the false-alerts problem?
Regards, Mark.
On 29 Oct, 2013, at 5:10 pm, Rolf Welde Skeie <rwskeie@gmail.com> wrote:
Ok, it seems like a few have similar issues. The logic behind the calculations seems to be reasonable, it is the assumption that there is a 1.5V difference between charging/non-charging state which is not generally applicable. From my observations it seems like increasing this to 2.0V would take care of most mis-firing events.?..
Disclaimer: I'm not an expert on batteries...
Running on 2.5.5 experimental/TC
Rolf
On 10/29/2013 10:00 AM, Matt Beard OVMS wrote:
Yup, I also get this message and it would be great if it were working properly, but it actually fires at 13.1V which is far too high.
Matt
On 29 October 2013 08:46, Rolf Welde Skeie <rwskeie@gmail.com <mailto:rwskeie@gmail.com>> wrote:
I have the following features set: #0=1, #8=1, #9=1, #15=1, all others =0.
Can't remember which one made it work, but one of them did, my guess would be #9 :)
Rolf
On 10/29/2013 09:38 AM, Håkon Markussen wrote:
I never get this alert. I have a Think City (as Rolf Skeie) and use the iOS-app. I have tested on both an exhausted aux-battery and on a brand new battery in perfect condition.
Br. Håkon
2013/10/29 Thomas Bergo <thomas.bergo@gmail.com <mailto:thomas.bergo@gmail.com> <mailto:thomas.bergo@gmail.com <mailto:thomas.bergo@gmail.com>__>>
I'm also get this alert.
Regard, Thomas
tirsdag 29. oktober 2013 skrev Rolf Welde Skeie følgende:
Hi,
I'm getting 12V battery alerts ala: "MP-0 PAALERT!!! 12V BATTERY CRITICAL (13.2V, ref=14.7V)"
So the 1.5V hardcoded difference between charged and non-charged state seems to be too low. The battery is working just fine and has been tested without any issues, but seems to stabilize at approx. 12.8V.
Is this a global issue; are others experiencing this as well?
If this is a issue only relevant to my car: would it make sense to allow for controlling some of these kind of values through parameters?
BTW, I believe the Think City module could be put in the production builds, it seems to be working fine.
Best regards -- Rolf Welde Skeie Solåsen 27, 5223 Nesttun, Norway +47 92403016 <tel:%2B47%2092403016> <tel:%2B47%2092403016> / rwskeie@gmail.com <mailto:rwskeie@gmail.com> ___________________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk <mailto:OvmsDev@lists.teslaclub.hk> http://lists.teslaclub.hk/____mailman/listinfo/ovmsdev <http://lists.teslaclub.hk/__mailman/listinfo/ovmsdev>
<http://lists.teslaclub.hk/__mailman/listinfo/ovmsdev <http://lists.teslaclub.hk/mailman/listinfo/ovmsdev>>
_________________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk <mailto:OvmsDev@lists.teslaclub.hk> <mailto:OvmsDev@lists.__teslaclub.hk <mailto:OvmsDev@lists.teslaclub.hk>>
http://lists.teslaclub.hk/__mailman/listinfo/ovmsdev <http://lists.teslaclub.hk/mailman/listinfo/ovmsdev>
_________________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk <mailto:OvmsDev@lists.teslaclub.hk> http://lists.teslaclub.hk/__mailman/listinfo/ovmsdev <http://lists.teslaclub.hk/mailman/listinfo/ovmsdev>
-- Rolf Welde Skeie Solåsen 27, 5223 Nesttun, Norway +47 92403016 <tel:%2B47%2092403016> / rwskeie@gmail.com <mailto:rwskeie@gmail.com> _________________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk <mailto:OvmsDev@lists.teslaclub.hk> http://lists.teslaclub.hk/__mailman/listinfo/ovmsdev <http://lists.teslaclub.hk/mailman/listinfo/ovmsdev>
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
-- Rolf Welde Skeie Solåsen 27, 5223 Nesttun, Norway +47 92403016 / rwskeie@gmail.com _______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev