A few changes to OTA this morning: The ‘ota status’ command used to check available server version only if a WIFI network was up. It now does that if ANY network is up (including modem). I’ve added a config instance ‘tag’ to parameter ‘ota’. This can be used to override the ota tag (default: main) at run-time. I’ve added a config instance ‘server’ to parameter ‘ota’. This can be used to override the ota server URL (default: api.openvehicles.com/firmware/ota <http://api.openvehicles.com/firmware/ota>). From now on, I’m going to be maintaining two tags for the production ota server api.openvehicles.com <http://api.openvehicles.com/>. These are: main: for stable releases edge: for bleeding edge developer releases You can, for example, now set your module to bleeding-edge by ‘config set ota tag edge’. Regards, Mark.
Begin forwarded message:
From: GitHub <noreply@github.com> Subject: [openvehicles/Open-Vehicle-Monitoring-System-3] 29e333: Issue #36: Add support for ota/tag in config Date: 16 April 2018 at 8:37:46 AM HKT To: mark@webb-johnson.net Reply-To: GitHub <noreply@github.com>
Branch: refs/heads/master Home: https://github.com/openvehicles/Open-Vehicle-Monitoring-System-3 Commit: 29e33348f6dff949fd22567083de1d9db04b05e3 https://github.com/openvehicles/Open-Vehicle-Monitoring-System-3/commit/29e3... Author: Mark Webb-Johnson <mark@webb-johnson.net> Date: 2018-04-16 (Mon, 16 Apr 2018)
Changed paths: M vehicle/OVMS.V3/components/ovms_ota/src/ovms_ota.cpp M vehicle/OVMS.V3/main/ovms_version.cpp
Log Message: ----------- Issue #36: Add support for ota/tag in config Issue #37: Add support for ota/server in config Issue #38: ota status should show available server version for modem as well as wifi