Craig, congratulations to a successful heart transplantation :-) Regarding RAM, I think you need to enable bank switching (CONFIG_SPIRAM_BANKSWITCH_ENABLE). Please also disable the PSRAM bug workaround and maybe do some performance comparison. SPIRAM operations should run much faster without the workaround. Regards, Michael Am 31.01.21 um 08:29 schrieb Craig Leres:
On 1/30/21 9:47 PM, Craig Leres wrote:
It doesn't look like ovms knows there is extra memory?
I think actually the idf assumes 4 MB of SPIRAM and a future version will allow use of more memory.
I also figured out that my oldest ovms module has 16 MB of flash.
Craig
ice 6540 % python esptool_py/esptool/esptool.py \ --chip esp32 \ --port /dev/tty.SLAB_USBtoUART \ --baud 921600 \ flash_id esptool.py v2.8 Serial port /dev/ovms-dev Connecting........_ Chip is ESP32D0WDQ6 (revision 1) Features: WiFi, BT, Dual Core, Coding Scheme None Crystal is 40MHz MAC: 30:ae:a4:??:??:?? Uploading stub... Running stub... Stub running... Changing baud rate to 921600 Changed. Manufacturer: ef Device: 6018 Detected flash size: 16MB Hard resetting via RTS pin... _______________________________________________ OvmsDev mailing list OvmsDev@lists.openvehicles.com http://lists.openvehicles.com/mailman/listinfo/ovmsdev
-- Michael Balzer * Helkenberger Weg 9 * D-58256 Ennepetal Fon 02333 / 833 5735 * Handy 0176 / 206 989 26