Tom, as you may have seen, I have added the support for CMD_ClimateControl to the latest Android App release. It only shows up if the vehicle capabilities contain cmd 26. I also added reading the doors5 HVAC bit for the button state, but I think it's not yet filled by the Leaf firmware. If you add that support to the firmware, the button should correctly reflect the state. The button images may be usable for the iOS App as well: https://github.com/openvehicles/Open-Vehicle-Android/blob/gcm/OpenVehicleApp... https://github.com/openvehicles/Open-Vehicle-Android/blob/gcm/OpenVehicleApp... Regards, Michael Am 04.06.2016 um 00:57 schrieb Michael Balzer:
If CMD_ClimateControl is suitable, could we add support in the Apps for a better button to toggle it on and off? Sure :) I see there is a car_doors5bits.HVAC to signal that climate control is on, but I don't think that is exposed in the android interface. This would be a good candidate to provide feedback that the climate control is on.
-- Michael Balzer * Helkenberger Weg 9 * D-58256 Ennepetal Fon 02333 / 833 5735 * Handy 0176 / 206 989 26