Jeremy, We are using the gateway function at the moment, that bridges the CAN and EV buses. Seems to work well - but it only bridges extended PID requests and replies (not most normal passive bus traffic). This allows us to access the EV bus from the CAN bus. Regards, Mark. On 4 Nov, 2013, at 11:09 am, Jeremy Whaling <jeremy.whaling@gmail.com> wrote:
Hi All,
According to the service manual, the current Telematics is located on the EV bus. My can to USB arrives Tuesday, hope to be listening to the TCU can messages soon.
I've attached a page to show what's on the EV and car can busses.
Jeremy
On Sunday, November 3, 2013, Kevin Sharpe ZCW wrote: OVMS hardware is currently in UK customs and should be released this week.
Have you obtained the programmer and any other dev tools?
On 3 Nov 2013, at 08:53, "Robert Sharpe" <robert.sharpe@evergreen-consulting.co.uk> wrote:
Hi Kevin,
I am keen to start helping out on the Leaf development. It's been 3 weeks and I just wandered what the progress with the OVMS hardware is ?
Regards, Rob
---- On Mon, 14 Oct 2013 15:01:15 +0100 <robert.sharpe@evergreen-consulting.co.uk> wrote ----
Hi Kevin,
Thanks a lot for your kind offer.
I should set expectations that I am an out of practice and slow coder, but I will do what I can to help. I can probably help more with test, debug and coordination.
So if you are still happy then, as I dont have any OVMS kit, I will need an OVMS and correct cable.
Can someone point me to a developer beginner's instructions for what else is required to develop/test, e.g. programmer, sniffer, code repository login, CM procedures, etc
It helps me, and hopefully anyone else working on the project, if we can agree the breakdown of work. As you may have already seen I have suggested a post for the Leaf development at http://www.openvehicles.com/node/111
Nikki/Mark shall we use that as a way of planning and tracking the work ?
Regards, Rob
On Oct 14, 2013, at 2.21PM, Nikki Gordon-Bloomfield wrote: Hi Kevin,
That's very generous. Happy to test OVMS in my LEAF, so I guess another OVMS kit with a righty cable?
Nikki.
On 14 Oct 2013, at 13:47, Kevin Sharpe ZCW <kevin.sharpe@zerocarbonworld.org">target="_blank">kevin.sharpe@zerocarbonworld.org> wrote:
Rob, Mark (C), Nikki,
If it helps, I'm happy to provide each of you with OVMS hardware FOC in return for your efforts on the Leaf development :-)
Let me know what you need, Kevin Sharpe | Founder & Patron Tel: +44 122 566 7544 ext: 800 | Skype: zerocarbonworld kevin.sharpe@zerocarbonworld.org | http://www.zerocarbonworld.org/ | twitter.com/zerocarbonworld
Zero Carbon World is a UK Registered Charity #1141347 From: Robert Sharpe <robert.sharpe@evergreen-consulting.co.uk">target="_blank">rob _______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev <photo.jpg>_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev