I have the same problem here with OVMS not booting after updating the firmware. I also need to unplug to get it starting again. I compile the firmware by myself, upload it to my server and update via the http link to my server in the ovms web interface. Kind Regards Chris Am Montag, dem 30.12.2024 um 10:17 +0100 schrieb Tamás Kovács via OvmsDev:
Now, during the holidays, I had some time to start solving my problem with the OVMS development environment again, since the basic ESP 3 is EOL, so it doesn't work, but luckily I managed to find a solution. (https://github.com/espressif/esp-idf/issues/14809)) The car with the OVMS is an ioniq 28kwh I noticed that the car's 12V battery was very low. the last time I went, the ovms froze while charging, it read 78% all the time, and I already drove 100 km with it. I didn't bother with it, but I noticed that the 12V battery was not charged, then I looked at it and there were no can messages. I restarted it and then the dive started again. My other problem is that no matter how many times I try to put another firmware on it via Wi-Fi, it won't start, I have to unplug it and plug it back in. Could you give me some advice on where I should go in troubleshooting?
-- Üdvözlettel: Kovács Tamás
_______________________________________________ OvmsDev mailing list OvmsDev@lists.openvehicles.com http://lists.openvehicles.com/mailman/listinfo/ovmsdev