Tricky. It is just a tap into the modem comms. But, there is an expansion connector on the board itself. The part labelled "HEADER 9X2" is a standard layout for expansion plugs, or holes are there to directly solder to the board. The I/O is 5v digital on those pins, and there are quite a few spare I/O pins that you can use. There is also GND, +12V and +5V if you need power. If you have a use for this, it would be quite simple to control some of these pins on/off on command (similar to the way home link works). Regards, Mark. On 2 Apr, 2013, at 8:56 PM, Nikki Gordon-Bloomfield <nikki@littlecollie.com> wrote:
Guys,
Is there any scope for enabling IO from the diagnostic port to operate an relay, either directly or through some opto-isolators?
Nikki. _______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev