Tamás, first of all, are you sure these errors are new? Check your log archive for the error pattern. An occasional "stuck bus-off error state" is normal for many vehicles, when the car is off. The 12V battery may just coincidentally happen to fail right now. How old is it? If it's relatively new and/or the errors didn't occur before, it could be an issue with the OBD connection. Regards, Michael Am 01.12.25 um 06:31 schrieb Tamás Kovács via OvmsDev:
Hi guys!
I have a problem with my ioniq 28kwh car, use ovms over 2 years, and now drain my battery last day i found the following, if i set the vehicle module to none, the drain is stop. i use the edge fw. In night the auto update fw is run and after the reboot the battery drain is continue. In the picture can see, 15:15 set vehucle module to none, auto update is run at ~3:02 (vehicle module to hyundaivfl) and i woke up at ~5:20 and set the vehicle module to none
I attach a log and a screenshot of battery voltage
What can is do? Problem with a OBD cable? I detached the ovms from the car for a couple off hours but when is reconnect it not connect to the wi-fi network, but when i connect a computer or a powerbank, the wi-fi connection is established, after usb disconnect network works fine, but i have many can errors. On charging i get many ovms messages, charge stopped, started.......
-- Thanks: Kovács Tamás
_______________________________________________ OvmsDev mailing list OvmsDev@lists.openvehicles.com http://lists.openvehicles.com/mailman/listinfo/ovmsdev
-- Michael Balzer * Am Rahmen 5 * D-58313 Herdecke Fon 02330 9104094 * Handy 0176 20698926