[Ovmsdev] Bolt / Amperae support

[Edwin ten Haaf]

short update.

When waking up the car with volt.ampera template I get lot's of data.
The solution to get data was, wake up the car :-) (sorry)
So the good news is that it can communicate. It reads out the charge status.
Range does not match but that's understandable.
[image: image.png]

[image: image.png]
Switching to my new template I get
[image: image.png]
In verbose level the module crashes because of to much data.

How can I port the volt/ampera readings to the new templates.
Must be something with the connectivity(can) I gues ?

Thanks in advance,

Edwin
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openvehicles.com/pipermail/ovmsdev/attachments/20210425/2566ed65/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 103584 bytes
Desc: not available
URL: <http://lists.openvehicles.com/pipermail/ovmsdev/attachments/20210425/2566ed65/attachment-0003.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 90911 bytes
Desc: not available
URL: <http://lists.openvehicles.com/pipermail/ovmsdev/attachments/20210425/2566ed65/attachment-0004.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 112634 bytes
Desc: not available
URL: <http://lists.openvehicles.com/pipermail/ovmsdev/attachments/20210425/2566ed65/attachment-0005.png>