[Ovmsdev] wifi not coming all the way up?

[Mark Webb-Johnson]

Yeah, the module sets the speed.

I suggest to try without a vehicle mode set to auto-start.

Regards, Mark

P.S. OVMS v3 doesn’t have termination on the can bus.

> On 19 Mar 2018, at 9:01 PM, Julien “JaXX” Banchet <jaxx at jaxx.org> wrote:
> 
> Oh!? A wrong CAN speed ? Haven’t though of that.
> 
> I have RT set, but I do’t know how to look up the speed which is set (besides the defaulted CONFIG_CAN_SPEED_100KBPS=y in sdkconfig, though I suppose the module sets the right speed, right ?)
> 
> JB./.
> 
> On 19 Mar 2018 at 13:39 +0100, Mark Webb-Johnson <mark at webb-johnson.net>, wrote:
>> Do you have a vehicle module defined, with a can bus active?
>> 
>> I had a similar thing when I was set to 1Mbps (it should have been 500Kbps).
>> 
>> Regards, Mark.
>> 
>>> On 19 Mar 2018, at 7:46 PM, Julien “JaXX” Banchet <jaxx at jaxx.org <mailto:jaxx at jaxx.org>> wrote:
>>> 
>>> It went christmas animation nuts as soon as I plugged it on the bus (already contact ON+GO), and went away the second I unplugged it.
>>> 
>>> I admit having left the v2 (which still carries all my profiles, and in case I needed to limit power+recup on the way as it’s been snowing again)
>>> 
>>> My bet is that there where too many CAN terminations on the bus and the dashboard cluster couldn’t see it’s friends, I’ll give it a shot without v2 on my way back home.
>>> (Which leads me to believe the termination resistor on my Arduino OBD shields aren’t connected)
>>> 
>>> JB./.
>>> 
>>> On 19 Mar 2018 at 12:43 +0100, Michael Balzer <dexter at expeedo.de <mailto:dexter at expeedo.de>>, wrote:
>>>> Uh oh… CAN bus contact failure? I haven't had any issues like that…
>>>> 
>>>> Am 19.03.2018 um 11:09 schrieb Julien “JaXX” Banchet:
>>>>> That didn’t happen :-)
>>>>> https://twitter.com/happyjaxx/status/975675071451844608 <https://twitter.com/happyjaxx/status/975675071451844608>
>>>>> 
>>>>> On 19 Mar 2018 at 10:07 +0100, Julien “JaXX” Banchet <jaxx at jaxx.org> <mailto:jaxx at jaxx.org>, wrote:
>>>>>> 
>>>>>> Gonna put it in the car (despite the passive GPS issue)
>>>>> 
>>>>> 
>>>>> _______________________________________________
>>>>> OvmsDev mailing list
>>>>> OvmsDev at lists.teslaclub.hk <mailto:OvmsDev at lists.teslaclub.hk>
>>>>> http://lists.teslaclub.hk/mailman/listinfo/ovmsdev <http://lists.teslaclub.hk/mailman/listinfo/ovmsdev>
>>>> 
>>>> 
>>>> --   
>>>> Michael Balzer * Helkenberger Weg 9 * D-58256 Ennepetal
>>>> Fon 02333 / 833 5735 * Handy 0176 / 206 989 26
>>>> _______________________________________________
>>>> OvmsDev mailing list
>>>> OvmsDev at lists.teslaclub.hk <mailto:OvmsDev at lists.teslaclub.hk>
>>>> http://lists.teslaclub.hk/mailman/listinfo/ovmsdev <http://lists.teslaclub.hk/mailman/listinfo/ovmsdev>
>>> _______________________________________________
>>> OvmsDev mailing list
>>> OvmsDev at lists.teslaclub.hk <mailto:OvmsDev at lists.teslaclub.hk>
>>> http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
>> 
>> _______________________________________________
>> OvmsDev mailing list
>> OvmsDev at lists.teslaclub.hk
>> http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
> _______________________________________________
> OvmsDev mailing list
> OvmsDev at lists.teslaclub.hk
> http://lists.teslaclub.hk/mailman/listinfo/ovmsdev

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openvehicles.com/pipermail/ovmsdev/attachments/20180319/dcaae43f/attachment.htm>