[Ovmsdev] 3.1 Production

[Guenther Huck]

Hello Mark

I im glad to hear that production is starting. Where can I get a Modul with EU-Modem? I will order one to start tests for Fiat 500e.

regards Guenther

From: Mark Webb-Johnson 
Sent: Friday, March 02, 2018 3:10 AM
To: OVMS Developers 
Subject: Re: [Ovmsdev] 3.1 Production

We’’ve got a general first batch of 120 modules (with modems) coming. Let’s make sure you get one of those. 

I heard back from the factory that the WROVER module provider has reduced their lead-time estimate from 4 weeks to 2 weeks, so that is good news. Hopefully we can start final assembly mid March. That does bring the deadline for firmware and QC arrangements forward, so that is our #1 focus now.


Regards, Mark.



  On 2 Mar 2018, at 12:34 AM, Igor Medvedev <medfedeff at gmail.com> wrote:

  Mark, 

  I want to buy OVMS 3.1 board and contribute to the project, as I've wrote before I had experience in 3g modules at commands and in CAN interfaces. If you have non ordered boards, then put me in order list, please.

  Thanks

  On Wed, Feb 28, 2018 at 8:28 AM, Mark Webb-Johnson <mark at webb-johnson.net> wrote:


    It is with great relief that I can announce I just wrote a very big cheque to produce the first batch of 120 OVMS v3.1 modules. That is on top of the last big cheque I wrote a couple of months ago for the injection moulding.

    The order is in, and production has started.

    Specifically, I’ve ordered:

      a.. 120x OVMS v3.1 modules (cased in black injection moulded enclosures) 
      b.. 60x OVMS 3G modems with EU frequencies 
      c.. 60x OVMS 3G modems with US frequencies

    These include WROVER modules with dual processor cores, 16MB flash and 4MB SPI RAM. Also all the other OVMS v3 features such as Wifi, Bluetooth, 3x CAN buses, SD CARD, GPIOs, external 12V power control, pluggable modem modules, OTA firmware updates, etc.

    100 (50x EU, 50x US) of these will go direct to FastTech for end users. 20 will come to me in Hong Kong for developers and special users. We have enough stock of the other cables, antennas, etc, already at FastTech.

    I’ll announce pricing in the next few days. There will be special pricing for everybody here (developers) as well as existing users who want to upgrade. This first batch are early production units, with beta firmware, intended for expert users only.

    To all those that have contributed to the project so far, we owe a huge debt of thanks. We’ve still got a long way to go with the firmware, but It feels good to finally get this out the door. I’m confident that we have a fantastic base on which to build great things in the coming years.

    Regards, Mark.


    _______________________________________________
    OvmsDev mailing list
    OvmsDev at lists.teslaclub.hk
    http://lists.teslaclub.hk/mailman/listinfo/ovmsdev






  -- 

  Thanks
  medfedeff at gmail.com
  +3-8-050-032-03-05
  skype:igor.medvedeff
  _______________________________________________
  OvmsDev mailing list
  OvmsDev at lists.teslaclub.hk
  http://lists.teslaclub.hk/mailman/listinfo/ovmsdev




--------------------------------------------------------------------------------
_______________________________________________
OvmsDev mailing list
OvmsDev at lists.teslaclub.hk
http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openvehicles.com/pipermail/ovmsdev/attachments/20180302/1fbb5e55/attachment.htm>