[Ovmsdev] Possible Manufactoring fault last Batch

Mark Webb-Johnson mark at webb-johnson.net
Mon Dec 21 16:11:08 HKT 2015


I’m travelling at the moment, but more than 100 of that batch have already been shipped and I haven’t heard of this elsewhere. Maybe just that one module? Or have you seen it on others as well?

Regards, Mark.

> On 21 Dec 2015, at 7:28 AM, Frank Demes <frank.demes at gmx.de> wrote:
> 
> <image1.PNG>
> 
> 
> The stencil seems to be defect so Vdd is missing some paste. 
> 
> Gruß
> Frank
> 
>> Am 21.12.2015 um 00:23 schrieb Frank Demes <frank.demes at gmx.de>:
>> 
>> Hi Jérôme,
>> 
>> could you check your OVMS for some missing soldering on the CAN chip?
>> 
>> 
>> 
>> Gruß
>> Frank
>> 
>>> Am 06.12.2015 um 23:35 schrieb Jérôme Nicolle <jerome at ceriz.fr>:
>>> 
>>> 
>>> 
>>> Le 06/12/2015 23:19, Michael Balzer a écrit :
>>>> you need to switch on the Twizy to read
>>>> registers.
>>> 
>>> Just tried aboard my twizy, in INIT an ON state, couldn't get any reading.
>>> 
>>> 
>>> -- 
>>> Jérôme Nicolle
>>> 06 19 31 27 14
>>> _______________________________________________
>>> OvmsDev mailing list
>>> OvmsDev at lists.teslaclub.hk
>>> http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
>> _______________________________________________
>> OvmsDev mailing list
>> OvmsDev at lists.teslaclub.hk
>> http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
> _______________________________________________
> OvmsDev mailing list
> OvmsDev at lists.teslaclub.hk
> http://lists.teslaclub.hk/mailman/listinfo/ovmsdev




More information about the OvmsDev mailing list