[Ovmsdev] Potential new OVMS user/tester UK Volt

[Mark Webb-Johnson]

Steve,

Sorry: One more thing - you will need a PICKIT to upload firmware to the module (or access to someone with a PICKIT to help you).

Regards, Mark.

On 5 Nov, 2013, at 8:40 am, Mark Webb-Johnson <mark at webb-johnson.net> wrote:

> Steve,
> 
> I think the state of support for Volt/Ampera at the moment is:
> SOC
> Ranges
> Temperatures
> Charge current / voltage
> VIN
> GPS Position
> Speed
> Charge / Drive / Park mode
> Charge interrupted alerts
> 
> Basically, most of the 'monitor' functions have been stable for some time now. There are no control functions (aircon, lock/unlock, etc) implemented yet.
> 
> Regards, Mark.
> 
> On 4 Nov, 2013, at 10:32 pm, Steve Ashton <sashton at gmail.com> wrote:
> 
>> 
>> 
>> Hi 
>> I have been following the mailing list for a few weeks as I have recently
>> bought a Volt and have just seen the OVMS kit is back in stock in the UK.
>> 
>> If I buy the Volt OVMS kit and a suitable programmer, what functions are
>> available out of the box?
>> Do I need anything more to start using the kit?
>> Is there any active development progressing with the Volt?
>> Any further help with "getting started" would be appreciated.
>> 
>> I have not coded anything since s/360 went out of fashion but am happy to
>> help with testing if that helps. 
>> 
>> Steve Ashton
>> 
>> _______________________________________________
>> OvmsDev mailing list
>> OvmsDev at lists.teslaclub.hk
>> http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
> 
> _______________________________________________
> OvmsDev mailing list
> OvmsDev at lists.teslaclub.hk
> http://lists.teslaclub.hk/mailman/listinfo/ovmsdev

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openvehicles.com/pipermail/ovmsdev/attachments/20131105/46a23602/attachment.htm>