I guess we can rule out timing issues then. Those are the values used by the MCP2515 Arduino lib by Cory Fowler.

The second set is used for 125 kbit, so I guess 100 kbit is confirmed.

I've got no more ideas at the moment. You can check the driver yourself, see doc for MCP2515. Maybe a comparison with Corys implementation makes sense.

Regards,
Michael


Am 30.12.2017 um 20:55 schrieb Geir Øyvind Vælidalo:
Got this now:

OVMS > can can2 status 
CAN:       can2
Mode:      Active
Speed:     100000
Rx pkt:                       0
Rx err:                     135
Tx pkt:                       0
Tx err:                       0
Err flags: 0xb

No packets at all.

Geir

30. des. 2017 kl. 20:50 skrev Michael Balzer <dexter@expeedo.de>:

Hm. One more try?

      cnf1=0x43; cnf2=0xe5; cnf3=0x83;




Am 30.12.2017 um 20:44 schrieb Geir Øyvind Vælidalo:
To me, it looks to give the same result. No difference :-(

Geir 

30. des. 2017 kl. 20:30 skrev Michael Balzer <dexter@expeedo.de>:

   cnf1=0x44; cnf2=0xe5; cnf3=0x83;



_______________________________________________
OvmsDev mailing list
OvmsDev@lists.teslaclub.hk
http://lists.teslaclub.hk/mailman/listinfo/ovmsdev


-- 
Michael Balzer * Helkenberger Weg 9 * D-58256 Ennepetal
Fon 02333 / 833 5735 * Handy 0176 / 206 989 26
_______________________________________________
OvmsDev mailing list
OvmsDev@lists.teslaclub.hk
http://lists.teslaclub.hk/mailman/listinfo/ovmsdev



_______________________________________________
OvmsDev mailing list
OvmsDev@lists.teslaclub.hk
http://lists.teslaclub.hk/mailman/listinfo/ovmsdev


-- 
Michael Balzer * Helkenberger Weg 9 * D-58256 Ennepetal
Fon 02333 / 833 5735 * Handy 0176 / 206 989 26