Michael,

Not sure what is going on. Here is what I get:

OVMS# log level verbose
Logging level for * set to verbose
OVMS# can log start monitor crtd
CAN logging to MONITOR active: Type:monitor Format:crtd Filter:off Vehicle:
Note: info logging is at debug log level, frame logging is at verbose, and errors as usual
I (58794) canlog-monitor: Now logging CAN messages to monitor
D (58794) canlog-monitor: 1564318162.354891 CXX OVMS CRTD
OVMS# can can1 start active 1000000
Can bus can1 started in mode active at speed 1000000bps
D (68894) events: Signal(power.can1.on)
OVMS# can can2 start active 1000000
Can bus can2 started in mode active at speed 1000000bps
D (73774) events: Signal(power.can2.on)
OVMS# can can1 tx standard 080 01 02 03 04
V (96934) canlog-monitor: 1564318200.493753 1T11 080 01 02 03 04
V (96934) canlog-monitor: 1564318200.494240 2R11 080 01 02 03 04
OVMS# can can1 tx standard 080 010203
V (108364) canlog-monitor: 1564318211.923843 1T11 080 03
V (108364) canlog-monitor: 1564318211.924243 2R11 080 03

Did you get a backtrace?

Regards,  Mark

P.S. The data bytes in ‘can tx’ need to be space separated. Without that, it messed up the data, but still works for me.

On 28 Jul 2019, at 7:27 PM, Michael Balzer <dexter@expeedo.de> wrote:

Mark,

is there a bug in the new can monitoring or am I doing something wrong?

monitor mode:
OVMS# can log start monitor crtd
CAN logging to MONITOR active: Type:monitor Format:crtd Filter:off Vehicle:RT
Note: info logging is at debug log level, frame logging is at verbose, and errors as usual
I (83919) canlog-monitor: Now logging CAN messages to monitor
D (83919) canlog-monitor: 1564312407.926444 CXX OVMS CRTD
OVMS# can can1 tx standard 080 010203
ets Jun  8 2016 00:22:57

rst:0x8 (TG1WDT_SYS_RESET),boot:0x3b (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:2
load:0x3fff0018,len:4
load:0x3fff001c,len:4952
load:0x40078000,len:7416
load:0x40080000,len:8344
entry 0x4008037c
W (86) boot: PRO CPU has been reset by WDT.
W (86) boot: WDT reset info: PRO CPU PC=0x4008aab8
W (86) boot: WDT reset info: APP CPU PC=0x4009621a

vfs mode:
OVMS# can log start vfs crtd /sd/logs/can.crtd
ets Jun  8 2016 00:22:57

rst:0x8 (TG1WDT_SYS_RESET),boot:0x3b (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:2
load:0x3fff0018,len:4
load:0x3fff001c,len:4952
load:0x40078000,len:7416
load:0x40080000,len:8344
entry 0x4008037c
W (86) boot: PRO CPU has been reset by WDT.
W (86) boot: WDT reset info: PRO CPU PC=0x4008aab8
W (86) boot: WDT reset info: APP CPU PC=0x400838cc

Regards,
Michael

-- 
Michael Balzer * Helkenberger Weg 9 * D-58256 Ennepetal
Fon 02333 / 833 5735 * Handy 0176 / 206 989 26
_______________________________________________
OvmsDev mailing list
OvmsDev@lists.openvehicles.com
http://lists.openvehicles.com/mailman/listinfo/ovmsdev