Hi Mark, Michael,
I am on Edge, and it updated 2am local on the 20th (2 days ago).
Firmware: 3.2.011-13-g7d83320/ota_0/edge (build idf
v3.3-beta3-775-gdc1ca69 Apr 20 2020 15:10:37). The app is 3.16.1
(2020031801).
I just put the car in Drive for a few minutes, and all the stats got
populated. The car is off and sleeping now, so I'll check it again
in the morning.
Greg
p.s. Just saw your EAP announcement. With the 3.2.012 code coming,
it will be interesting to see what happens after the reset. I'll
let you know!
Mark Webb-Johnson wrote:
Greg,
What firmware version are you running in the module?
If EAP/MAIN 3.2.011, can you try updating to the edge release? I
suspect you are seeing the bug with 3.2.011 and the TPMS
protocol v2 message.
Regards, Mark.
Hi folks,
So, I seem to be going backwards with OVMS and my Tesla
Roadster...
I'm looking at the OVMS app on my Android phone.
Used to be that I'd see the TPMS data - pressure and
temperature - as it was the last time the car was
driven.
Then it turned into zeros.
Today I see it's gone altogether. This is not progress.
What I want to see is the data from the car, as last it
was read. I do not care that it is not live. In fact,
if it were live, that would mean that the car is in
Drive, which (hopefully) means that I am in my car. If
so, I have no use for the OVMS, as the
data is sitting right there on the car's display.
Is there any way to get the old functionality back?
Greg
_______________________________________________
OvmsDev mailing list
OvmsDev@lists.openvehicles.com
http://lists.openvehicles.com/mailman/listinfo/ovmsdev
_______________________________________________
OvmsDev mailing list
OvmsDev@lists.openvehicles.com
http://lists.openvehicles.com/mailman/listinfo/ovmsdev