Most of your crashes are stack overflows.

You can currently only see the task causing this on the USB terminal, it will be shown in the crash info.

Check if your sdkconfig has lower stack sizes than the suggested defaults:

OVMS.V3> diff support/sdkconfig.default.hw31 sdkconfig

Btw, I currently build my releases with CONFIG_OVMS_SYS_COMMAND_STACK_SIZE=10240 due to the config restore issue.

Regards,
Michael

Am 04.05.22 um 06:11 schrieb Tamás Kovács:

I have many problem with my new OVMS (OVMS WIFI BLE BT cores=2 rev=ESP32/3; MODEM SIM7600) Now i use the the following fw (3.3.002-31-g3604f462)

The crash logs i attached.

If i restart the network from my MAC with cable, is see (photo attached)

- Warning: cellulars: Cannot restart, as modem driver is not loaded

and i get a following for the wi-f many timei:

- wifi: bcn_timeout, ap_probe_send_start

--

Best wishes:
Tamás Kovács
_______________________________________________
OvmsDev mailing list
OvmsDev@lists.openvehicles.com
http://lists.openvehicles.com/mailman/listinfo/ovmsdev

-- 
Michael Balzer * Helkenberger Weg 9 * D-58256 Ennepetal
Fon 02333 / 833 5735 * Handy 0176 / 206 989 26