I know of no case of bricking by flashing the firmware.
Using the developing environment, a simple "make app-flash" will do the esptool call for you.
Of course you can also flash OTA. I usually flash my desk/development module by USB and the one in my car via Wifi from my local server. It's up to you. Flashing OTA can only update the firmware, but that's normally sufficient.
The "-dirty" tag is appended when building from a "dirty" working tree, i.e. one with uncommitted changes.
Regards,
Michael
Am 05.12.20 um 11:40 schrieb Steve
Davies:
Hi Mark et-al,
I've installed the esp32 and the esp-idf environments on my Mac and successfully build the OVMS firmware.
In the developer guide it then covers how to flash the box with esptool.
But: do I need to do that? - my OVMS box is up and running already -
I'm guessing I can use OTA update to update with
steve@maximus OVMS.V3 % ls -l build/ovms3.bin
-rw-r--r-- 1 steve staff 2986336 Dec 5 12:24 build/ovms3.bin
?
Since the "flash from web" and and "flash from file" are looking for an ovms.bin.
Nervous to brick my box since it was expensive to get it to Cape Town.
By the way, my build prints 'App "ovms3" version: 3.2.015-162-g10232c58-dirty'
I recognise the git commit hash, but what is the "-dirty"?
(I build a "bmwi3" branch of a fork of the original project - maybe that answers my own question?)
My OVMS box currently says it's running "3.2.015/ota_0/main (build idf v3.3.2-881-g22d636b7b Sep 2 2020 08:32:35)"
Thanks,Steve
_______________________________________________ OvmsDev mailing list OvmsDev@lists.openvehicles.com http://lists.openvehicles.com/mailman/listinfo/ovmsdev
-- Michael Balzer * Helkenberger Weg 9 * D-58256 Ennepetal Fon 02333 / 833 5735 * Handy 0176 / 206 989 26
_______________________________________________ OvmsDev mailing list OvmsDev@lists.openvehicles.com http://lists.openvehicles.com/mailman/listinfo/ovmsdev