29. des. 2017 kl. 22:23 skrev Michael Balzer <dexter@expeedo.de>:

Geir,

can you check the output of "can … status" before and after death? Do the rx/tx counters still grow after death?

Regards,
Michael

Am 29.12.2017 um 22:14 schrieb Geir Øyvind Vælidalo:

I’m having problems with IncomingFrameCan when reading from two can buses from the Kia Soul. One of the can buses dies prematurely, and quite fast, with no visible errors. Most of the time it is Can2 that dies, however that is not always the case.

I tried with an almost empty IncomingFrameCan2, containing just a counter to see how many times it is called, and it varied from 15 to  almost 200 before it dies. 

This is the code:

RegisterCanBus(1, CAN_MODE_ACTIVE, CAN_SPEED_500KBPS);

RegisterCanBus(2, CAN_MODE_ACTIVE, CAN_SPEED_100KBPS);

…

void OvmsVehicleKiaSoulEv::IncomingFrameCan2(CAN_frame_t* p_frame)

{

uint8_t *d = p_frame->data.u8;

m_counter->SetValue( m_counter->AsInt()+1 );

}

IncomingFrameCan1 is quite verbose, but should not take too long time to process. But I have a lot of Polls on Can1:

static const OvmsVehicle::poll_pid_t vehicle_kiasoulev_polls[] =

  {

    { 0x7e2, 0x7ea, VEHICLE_POLL_TYPE_OBDIIVEHICLE,  0x02, {  30,  30,  30 } }, // VIN

    { 0x7e4, 0x7ec, VEHICLE_POLL_TYPE_OBDIIGROUP,  0x01, {  30,  10,  10 } }, // BMC Diag page 01

    { 0x7e4, 0x7ec, VEHICLE_POLL_TYPE_OBDIIGROUP,  0x02, {  30,  30,  10 } }, // BMC Diag page 02

    { 0x7e4, 0x7ec, VEHICLE_POLL_TYPE_OBDIIGROUP,  0x03, {  30,  30,  10 } }, // BMC Diag page 03

    { 0x7e4, 0x7ec, VEHICLE_POLL_TYPE_OBDIIGROUP,  0x04, {  30,  30,  10 } }, // BMC Diag page 04

    { 0x7e4, 0x7ec, VEHICLE_POLL_TYPE_OBDIIGROUP,  0x05, {  30,  30,  10 } }, // BMC Diag page 05

    { 0x794, 0x79c, VEHICLE_POLL_TYPE_OBDIIGROUP,  0x02, {  30,  30,  10 } }, // OBC - On board charger

    { 0x7e2, 0x7ea, VEHICLE_POLL_TYPE_OBDIIGROUP,  0x00, {  30,  10,  10 } }, // VMCU Shift-stick

    { 0x7e2, 0x7ea, VEHICLE_POLL_TYPE_OBDIIGROUP,  0x02, {  30,  10,   0 } }, // VMCU Motor temp++

    { 0x7df, 0x7de, VEHICLE_POLL_TYPE_OBDIIGROUP,  0x06, {  30,  10,   0 } }, // TMPS

    { 0x7c5, 0x7cd, VEHICLE_POLL_TYPE_OBDIIGROUP,  0x01, {  30,  10,   0 } }, // LDC - Low voltage DC-DC

    { 0, 0, 0, 0, { 0, 0, 0 } }

  };

The few times that Can2 is the one that lives on, I can’t see any metrics from Can1.

 

Current source can be seen here: https://github.com/goev/Open-Vehicle-Monitoring-System-3 in case someone can take a look.

Any pointers to where I can start looking, or tips to what I can try?

Best regards,

Geir

_______________________________________________
OvmsDev mailing list
OvmsDev@lists.teslaclub.hk
http://lists.teslaclub.hk/mailman/listinfo/ovmsdev

-- 
Michael Balzer * Helkenberger Weg 9 * D-58256 Ennepetal
Fon 02333 / 833 5735 * Handy 0176 / 206 989 26

_______________________________________________
OvmsDev mailing list
OvmsDev@lists.teslaclub.hk
http://lists.teslaclub.hk/mailman/listinfo/ovmsdev