On 19 Sep 2018, at 3:59 PM, Michael Balzer <dexter@expeedo.de> wrote:

For the record:

In order to send commands to the Twizy, you need to enable CAN write access.

You can do so either by using the web UI or by setting feature 15 to 1 or by issuing "config set xrt canwrite yes".

@Mark: the error text is defined here:
https://github.com/openvehicles/Open-Vehicle-Monitoring-System-3/blob/master/vehicle/OVMS.V3/components/canopen/src/canopen.cpp#L373

Regards,
Michael

Am 19.09.18 um 04:09 schrieb Mark Webb-Johnson:

@michael,

Could you help this user? I greped for the error text in OVMS v2, v3 and Android, source code, but can’t find it.

Regards, Mark.

<Screenshot_20180918-222459.png>

Begin forwarded message:

bricoauto has created the ticket 'Consult on Renault twizy':
https://www.openvehicles.com/node/2087#comment-0
State: new
Priority: normal

You can visit the following URL to update this ticket:
https://www.openvehicles.com/node/2087#comment-form

Ticket text:
------------------------------

I have successfully installed the Ovms 3.1 module in my renault twizy, but I
still do not know how to modify parameters. For example with the App, if I
want to modify the speed limitation, it tells me the following error message:
Can bus not in active mode

I guess that writing or reading by can not be active, because I can not see
the fault logs etc ...
Could you help me with this?
Regards!

_______________________________________________
OvmsDev mailing list
OvmsDev@lists.openvehicles.com
http://lists.openvehicles.com/mailman/listinfo/ovmsdev

-- 
Michael Balzer * Helkenberger Weg 9 * D-58256 Ennepetal
Fon 02333 / 833 5735 * Handy 0176 / 206 989 26

_______________________________________________
OvmsDev mailing list
OvmsDev@lists.openvehicles.com
http://lists.openvehicles.com/mailman/listinfo/ovmsdev