I see some strange behaviour on the T26A e-Up with the new
code. I don't get all values from the bus after a fresh reboot
(mostly no VIN, sometimes also no SOC)). I have to sent a wakeup
call first:
I (160137) ovms-server-v2: Send MP-0
S0,K,0,0,stopped,standard,0,0,0,0,0,0,0,21,0,0,0,0,0.00,0,0,0,0,-1,0,0,0,0,0,0,0,0.00,0.00,0
I (160137) ovms-server-v2: Send MP-0
D0,0,5,0,0,0,0,0,0,159,0,0,0,0,11.83,0,12.6,0,0,0,0
I (160147) ovms-server-v2: Send MP-0
F3.2.015-42-g2ab8d062/ota_0/main (build idf
v3.3.2-881-g22d636b7b Sep 6 2020 09:04:40),,18,1,VWUP.T26,CWLAN
I (169127) webserver: HTTP POST /api/execute
I (169147) webcommand: HttpCommandStream[0x3f852fcc]: 3964692
bytes free, executing: wakeup
I (171147) v-vweup-t26: Sent Wakeup Command - stage 1
I (171267) v-vweup-t26: Sent Wakeup Command - stage 2
OVMS# wakeup
Vehicle has been woken
I (193527) v-vweup-t26: Comfort CAN calls for sleep
I (221137) ovms-server-v2: Send MP-0
S100.0,K,0,0,stopped,standard,260,241,0,0,0,0,0,21,0,0,0,0,0.00,0,0,0,0,-1,0,0,0,0,0,0,0,0.00,0.00,0
I (221147) ovms-server-v2: Send MP-0
D0,0,5,16,0,0,0,36030,0,220,25,0,1,1,11.47,0,12.6,0,0,0,0
I (221147) ovms-server-v2: Send MP-0
F3.2.015-42-g2ab8d062/ota_0/main (build idf
v3.3.2-881-g22d636b7b Sep 6 2020
09:04:40),xxxxxxxxxxxxxxxx,18,1,VWUP.T26,CWLAN
I did not change my code and have never seen this before.
Perhaps a problem with the new polling code?
Regards
Chris
_______________________________________________
OvmsDev mailing list
OvmsDev@lists.openvehicles.com
http://lists.openvehicles.com/mailman/listinfo/ovmsdev