Hi OVMS Developers,

With a little help from my AI friends, I have submitted a Pull Request
to expand the Maxus T90 EV (MT90) vehicle module.

Summary of Enhancements
BMS Telemetry (0x748 / 0x7C8):

PID 0xD117: 0.1% high-resolution SOC (takes precedence over the VCU
integer SOC 0xE002).

PID 0xB105: Pack current (0.1 A resolution, offset 32768, negative
during charge). Calculates instant pack power and integrates session
ms_v_charge_kwh.

PID 0xB11E: Pack voltage (0.1 V resolution).

PID 0xB110: Max/Min/Avg cell temperatures with multi-frame collection.

State Machine & Charging Detection:

PID 0xE015: VCU ignition state tracking (ms_v_env_on).

PID 0xE018: VCU High-Voltage active status.

Charging state (PollState 2) active when HV is engaged (0xE018 > 0)
while ignition (0xE015) is off. Includes a 120s watchdog to detect
charge completion/sleep.

Passive Body CAN Decoding (CAN1 500kbps):

0x281: Lock / unlock status (ms_v_env_locked).

0x375: Front/Rear door states (ms_v_door_fl/fr/rl/rr) and headlight status.

0x510: HVAC fan speed step (ms_v_env_cabinfan) and "temperature" setpoint.

0x540: 24-bit little-endian odometer decoding (0.1 km resolution).

Multi-frame Reassembly:

Multi-frame collection for extended VIN (0xF190) across 3 CAN frames
(3 + 7 + 7 bytes) to reliably capture full 17-character VINs.

Validation
Tested on a physical Maxus T90 EV during a 58 km commute followed by a
7 kW AC charging session to 100% SOC. Telemetry logs confirm clean
voltage/current dynamics, precise SOC tracking, and accurate charge
duration/energy accumulation.

The Pull Request is available here:
https://github.com/jmariuse2/Open-Vehicle-Monitoring-System-3/pull/new/maxus-t90-bms-charging-updates

Documentation (components/vehicle_maxus_t90/docs/index.rst) has also
been updated. I welcome any feedback or code review suggestions.

Best regards,

Jan Marius Evang