Fetching…
Your module is running an outdated partitioning scheme.
We recommend upgrading your partitioning scheme to support firmware updates larger than 4MB in size.
The upgrade procedure runs fully automatic, you just need to start it. Depending on your configuration, the upgrade can take up to 5 minutes to finish, so please be patient.
In case something goes wrong, the module will reboot into standard mode, and you can use this page to display and download the upgrade log for further analysis.
Note: in case something goes badly wrong, you may need to reinstall the module via USB. See user guide on how to do this.
We strongly recommend creating a config backup first in case you haven't done already: Configuration Backup
Do not power off the module while the upgrade is running!
The upgrade process has failed to finish the store migration, most probably caused by a config filesystem corruption. Please check the upgrade log for details.
We recommend doing a factory reset (erasing & reformatting the config store) now to get a clean state. The upgrade procedure will continue automatically after the reboot.
Note: after the factory reset, the module will reboot into the initial setup mode (with Wifi
network OVMS). You can then restore your config backup if available, or reconfigure
the module from scratch.
The partitioning scheme is up to date.
The partitioning scheme cannot be determined or is not supported.
Please verify your firmware is up to date.
The partition upgrade has logged 0 error(s) and 0 warning(s).