a) a test with another two device

b) nothing working

c) if i use 19 Poll type and vehicle set to trio no response, if vehicle empty set get 80-error code

If i connect simultaneously another device can i capture the DTC code reading with ovms using a Y OBD cable?

My car always have a U1113 DTC error because not have a EV-REMOTE ECU. I have a log file created with ovms when i read and clean the dtc codes with hobdrive. Another error codes: P1A39 (BMU), P1A33 (BMU), P1A7E (CMU)

Log file: https://drive.google.com/file/d/1zcIcMsBYLEoubafO1P6JW_GchZXI7WLD/view?usp=sharing

Michael Balzer <dexter@expeedo.de> ezt írta (időpont: 2021. jún. 19., Szo, 18:55):

Tamás,

a) are you sure the DTC is in device 761/762? There are three more devices in the i-MiEV source.

b) maybe you need to give another status mask, e.g. 1902ae or just all DTCs by 1902ff -- did you try that?

c) you can also try the other DTC retrieval subfunctions, e.g. 1901<mask> to get just the number of DTCs (see ISO spec for more)

Regards,
Michael

Am 19.06.21 um 18:13 schrieb Tamás Kovács:

Hi!

I would like to create a dtc reading on i-miEV/ Peugeot iOn. But if is send the following command:

OVMS# obd can1 request device 761 762 19020f
761[762] 19020f: request failed with response error code 80

I now use hobdrive app to read dtc code with OBDlink LX
-- 
Michael Balzer * Helkenberger Weg 9 * D-58256 Ennepetal
Fon 02333 / 833 5735 * Handy 0176 / 206 989 26
_______________________________________________
OvmsDev mailing list
OvmsDev@lists.openvehicles.com
http://lists.openvehicles.com/mailman/listinfo/ovmsdev