I think it all looks ok. You have the latest.

It now looks ok, and probably worth squeezing these last few updates in. So, I will make a 3.2.010 now and release to EAP.

Regards, Mark.

On 3 Feb 2020, at 10:49 AM, Greg D <gregd2350@gmail.com> wrote:

Hi Mark,

Saw the update Metrics look good now. What changed?

The module is reporting another update is pending for tonight. 3.2.009-2-g39cdb7e. Same version number...

Greg

On February 2, 2020 4:24:35 PM PST, Mark Webb-Johnson <mark@webb-johnson.net> wrote:
Greg,

On the server I am seeing you running 3.2.008-134-ge6ac0c7/ota_0/edge and all the data looks fine. For example:

ovms> metric list v.b
...
Vehicle Response:
v.b.12v.voltage 13.04V
v.b.12v.voltage.ref 12.6V
v.b.cac 136.777Ah
v.b.consumption 0Wh/km
v.b.current 1A
v.b.health CAC 136.78Ah SOC 94% LIM 83% MIN 83% MAX 85%
v.b.p.level.max 85%
v.b.p.level.min 83%
v.b.power 0.3985kW
v.b.range.est 196.339km
v.b.range.ideal 255.885km
v.b.soc 95%
v.b.soh 82.9213%

ovms> metric list v.c
...
Vehicle Response:
v.c.charging no
v.c.climit 24A
v.c.current 0A
v.c.duration.full 14Min
v.c.kwh 9kWh
v.c.mode standard
v.c.pilot yes
v.c.state done
v.c.substate powerwait
v.c.time 0Sec
v.c.voltage 0V

The temperature bug for Roadster is a known issue, and is fixed in 4082bb2a (and released in 3.2.009).

I triggered an update for you (to 3.2.009-1-g92cc5ed), and that installed ok. I’ll try to find out if the temperature bug is fixed now or not.

Regards, Mark.

On 3 Feb 2020, at 5:08 AM, Greg D. <gregd2350@gmail.com> wrote:

Um, I just noticed that all the metrics except for the 12v battery
voltage are zero. The car is awake and charging right now, but hasn't
been driven since the software update to 3.2.008-134-ge6ac0c7, if that
matters. I believe the TPMS metrics don't update until it's driven, but
I should be seeing the temps. All gray and zero.

I tried putting the car in Drive (just sitting there), and the TPMS data
came on after a few minutes. But the rest of the metrics are still zero
and gray.

The VDS shows the correct temps, and is operating normally.

Oops?

Greg

Greg D. wrote:
My module updated to 3.2.008-134-ge6ac0c7 last night (2am local), and
did the single update as it should. m.version is consistent with this.
The module sees your 3.2.009-1-g92cc5ed as available. Presume it will
update tonight.

So, all "go" from this console.

Greg

Mark Webb-Johnson wrote:
I’ve tagged 3.2.009 based on where we are today, and built on my edge.

If no problems reported overnight, I’ll push to EAP tomorrow.

Regards, Mark.

On 2 Feb 2020, at 6:21 PM, Michael Balzer <dexter@expeedo.de> wrote:

Am 02.02.20 um 02:13 schrieb Mark Webb-Johnson:
Seems we are ready for another release. I made a number of fixes yesterday, and maybe able to make a few more today, then I am done and ready to release 3.2.009.

Anything else to put in this?
OK, nothing open here.

Regards,
Michael

Regards, Mark
_______________________________________________
OvmsDev mailing list
OvmsDev@lists.openvehicles.com
http://lists.openvehicles.com/mailman/listinfo/ovmsdev
--
Michael Balzer * Helkenberger Weg 9 * D-58256 Ennepetal
Fon 02333 / 833 5735 * Handy 0176 / 206 989 26

_______________________________________________
OvmsDev mailing list
OvmsDev@lists.openvehicles.com
http://lists.openvehicles.com/mailman/listinfo/ovmsdev
_______________________________________________
OvmsDev mailing list
OvmsDev@lists.openvehicles.com
http://lists.openvehicles.com/mailman/listinfo/ovmsdev

_______________________________________________
OvmsDev mailing list
OvmsDev@lists.openvehicles.com
http://lists.openvehicles.com/mailman/listinfo/ovmsdev

--
This space for rent...
_______________________________________________
OvmsDev mailing list
OvmsDev@lists.openvehicles.com
http://lists.openvehicles.com/mailman/listinfo/ovmsdev