They’ll do pretty much whatever we ask them to do.

To try to formalise this, so everyone can see, I’ve created a production/qc/production_notes.txt file with the production notes that will be given to the China side. This should document all the production and QC steps they should do.

What I have at the moment is:

********************************************************************************

** TOOLS

********************************************************************************

1] DB9 CAN Bus QC tool

   DB9 Female with:

    * Pins 2, 4, and 6 connected (all CAN-L signals)

    * Pins 5, 7, and 8 connected (all CAN-H signals)

    * R120 between pins 2 and 5

    * External 12V power connector

      * GND on pin 3

      * +12V on pin 9

********************************************************************************

** PRODUCTION STEPS

********************************************************************************

1] Default wifi AP and module passwords

   OVMS> config set wifi.ap OVMS <serialnumber>

   OVMS> config set password module <serialnumber>

   Where <serialnumber> is the serial number from the label on the enclosure.

I think that should set both the module default and auto wifi AP passwords to the serial number of the module. That will be on a label on the underside of the module.

You are correct: this is a connected car, with possibly disastrous consequences should somebody malicious gain access. Best to err on the side of caution.

Regards, Mark.

On 3 Mar 2018, at 4:07 AM, Michael Balzer <dexter@expeedo.de> wrote:

Mark,

Am 26.02.2018 um 07:28 schrieb Mark Webb-Johnson:

I’ve asked the China side. Specifically:

1. Can you print serial number stickers for these modules? I can provide design - and we can print a large batch.
2. Then, during manufacturing, have one step to enter serial number as password into module, like:
1. Flash
2. Connect terminal
3. QC checks
4. New step to type: config set wifi.ap OVMS <serialnumber>

Just to double check: so we won't set the module password, only the AP pass phrase?

Has setting the module password any drawbacks?

I'm asking because I assume the SMS channel -as soon as implemented- will also provide command access, which would be open by default as well without a module password.

Setting the module password would secure the webserver as well.

Regards,
Michael

-- 
Michael Balzer * Helkenberger Weg 9 * D-58256 Ennepetal
Fon 02333 / 833 5735 * Handy 0176 / 206 989 26

_______________________________________________
OvmsDev mailing list
OvmsDev@lists.teslaclub.hk
http://lists.teslaclub.hk/mailman/listinfo/ovmsdev

_______________________________________________
OvmsDev mailing list
OvmsDev@lists.teslaclub.hk
http://lists.teslaclub.hk/mailman/listinfo/ovmsdev