Over recent releases, the OVMS v3 firmware image has grown close to the original 4 MB application partition limit defined in the legacy partition layout (factory, ota_0, ota_1, each 4 MB on a 16 MB flash). To ensure we can continue to deliver new features and fixes, we have introduced an updated partitioning scheme with larger application partitions, and the latest MAIN and EAP firmware builds are now designed to run on these expanded partitions. Modules that remain on the old 4 MB partition layout will soon be unable to accept newer firmware images, and will therefore stop receiving further OTA updates.
To stay current, you will need to first update your module to the latest MAIN or EAP firmware release, and then perform a one‑time partition upgrade using the web UI (Config → Partitioning), as documented in the OVMS downloads and OTA guidance. The upgrade process will re‑partition the module’s flash to the new layout and migrate your installation so that it can accept larger firmware images going forward. Please ensure you complete both steps—firmware update and partition upgrade—as soon as practical; until the partition upgrade is finished, your module will remain on the old 4 MB scheme and will not receive new releases.
Once the partition upgrade has been completed successfully, your OVMS module will continue to receive MAIN, EAP, or EDGE updates as usual, and you will benefit from ongoing enhancements and bug fixes without running into the previous 4 MB size limit. If you are unsure which partition layout your module is using, or need assistance with the upgrade, please consult the online OVMS documentation or your firmware provider’s download page, or contact support for guidance before proceeding.