Didier,

support for CAN extended frame mode hasn't yet been implemented on the RE scanner or the OBD poller.

As I wrote before, that's totally rare in vehicles, there wasn't any need to support this up to now.

If you need it, you're welcome to implement it. But I doubt you need it.

You can possibly check by sending some strategic CAN extended frames manually, see command "can can1 tx extended".

Regards,
Michael

Am 25.01.21 um 19:38 schrieb didier@ernotte.com:

Hi,

Thanks to all the help you provide me here, I was able to identify most of the 11bits ECU with broadcast request and SavvyCAN, and relative PID with the PID scanner.

I am a bit confused how I can scan ECU/PID with the extended mode (29 bits). How can I do the same kind of investigation and scanning with the extended mode ?

Didier

-- 
Michael Balzer * Helkenberger Weg 9 * D-58256 Ennepetal
Fon 02333 / 833 5735 * Handy 0176 / 206 989 26