Now i create a new log file without dropped frame, with filter.

Only active error code is U1113.

This is a U1113 Error?
1624253728.207555 1R11 751 04 18 00 ff 00 00 00 00
1624253728.213037 1R11 752 05 58 01 d1 13 e0 00 8e

OVMS# obd can1 request device 751 752 1800ff00
751[752] 1800ff00: Response: 01 d1 13 e0                 | ....
if i decode this
d1 = 11010001
bit 6-7 = 11 -» U
bit 4-5 = 01 -» 1
bit 0-3 = 0001 -» 1
 so the error code is: U1113

OVMS# obd can1 request device 751 752 1801ff00
751[752] 1801ff00: Response:
df 05 62 00 00 b4 00 00 b3 00 21 23 00 21 22 00 | ..b.......!#.!".
1a 00 00 21 28 00 21 27 00 1a 01 00 21 38 00 05 | ...!(.!'....!8..
58 00 05 57 00 1b 31 00 1a f0 00 1b 19 00 1b 1a | X..W..1.........
00 1b 1b 00 28 05 00 07 05 00 1a 02 00 1a 03 00 | ....(...........
1a 04 00 1a 2c 00 1a 06 00 1a 07 00 1a 08 00 1a | ....,...........
09 00 1a 0a 00 1a 0b 00 1a 0c 00 1a 0d 00 1a 0e | ................
00 1a 0f 00 0c 73 00 0c 74 00 0a 05 00 1b 2b 00 | .....s..t.....+.
06 91 00 06 92 00 06 93 00 06 94 00 0a 01 00 1a | ................
10 00 1a 11 00 1a 12 00 06 46 00 06 47 00 d8 01 | .........F..G...
00 d8 02 00 d8 03 00 d8 04 00 d8 05 00 d8 06 00 | ................
1a 14 00 1b 0a 00 0a e6 00 0a e7 00 0a e2 00 0a | ................
db 00 0a a1 00 0a df 00 0a a4 00 0a 0a 00 1a 15 | ................
00 1a 16 00 1a 17 00 0a 09 00 0a 10 00 1b 29 00 | ..............).
1b 2a 00 1a 18 00 1a 19 00 06 0b 00 06 05 00 06 | .*..............
04 00 06 0c 00 16 02 00 06 2f 00 d1 90 00 d0 73 | ........./.....s
00 1b 09 00 d1 1b 00 d1 1c 00 d1 1d 00 d1 10 00 | ................
d1 02 00 d1 04 00 1b 35 00 d1 08 00 d1 09 00 d1 | .......5........
05 00 1b 36 00 d1 13 e0 d1 06 00 d1 6a 00 d1 6b | ...6........j..k
00 d9 10 00 d9 00 00 d9 11 00 d9 01 00 1a 1a 00 | ................
1a f1 00 1a f2 00 1a f3 00 05 60 00 1a 1b 00 1a | ..........`.....
1c 00 1a 22 00 1a 1e 00 d0 80 00 d1 60 00 d9 20 | ..."........`.. 
00 0a ba 00 1a 1f 00 0a 2a 00 0a 3d 00 0a ed 00 | ........*..=....
0a 51 00 1a 20 00 1a 21 00 1a 23 00 1a 24 00 1a | .Q.. ..!..#..$..
25 00 1a 26 00 1a 27 00 1a 28 00 1a 29 00 1a 2a | %..&..'..(..)..*
00 0a 90 00 0a 78 00 1a 2b 00 1a 3d 00 1a 3e 00 | .....x..+..=..>.
1a 3f 00 1b 1c 00 1b 1d 00 0a bf 00 1a 44 00 1a | .?...........D..
45 00 1a 2d 00 1a 2e 00 1a 2f 00 1a 30 00 1a 31 | E..-...../..0..1
00 1a 32 00 1b 33 00 1a 33 00 1a 34 00 1b 34 00 | ..2..3..3..4..4.
1a 35 00 1a e6 00 d0 81 00 d1 61 00 d0 90 00 1a | .5........a.....
38 00 d9 21 00 d9 24 00 1a f4 00 1a f5 00 1a 39 | 8..!..$........9
00 1b 1e 00 1b 1f 00 1a c5 00 1b 2f 00 1b 21 00 | .........../..!.
1a f6 00 1a f7 00 1a f8 00 1a f9 00 1a fa 00 1a | ................
fb 00 1a fc 00 1a fd 00 1a fe 00 1a ff 00 1b 00 | ................
00 1b 01 00 1b 02 00 1b 03 00 1b 04 00 1b 05 00 | ................
1b 06 00 1b 07 00 1b 08 00 1b 0c 00 1b 0d 00 1b | ................
0b 00 1b 22 00 1b 23 00 1b 24 00 1b 25 00 1b 26 | ..."..#..$..%..&
00 1b 27 00 1b 28 00 1b 2c 00 1b 30 00 1b 2d 00 | ..'..(..,..0..-.
1b 32 00 d1 17 00 05 13 00 12 31 00 1b 37 00 91 | .2........1..7..
78 00 60 05 00 60 06 00 60 07 00 60 0a 00 60 0e | x.`..`..`..`..`.
00 60 0f 00 60 10 00 60 11 00 60 16 00 60 18 00 | .`..`..`..`..`..
60 19 00 60 1a 00 60 20 00 60 21 00 60 22 00 60 | `..`..` .`!.`".`
2a 00 60 2b 00 60 2c 00 60 2d 00 60 2e 00       | *.`+.`,.`-.`..
OVMS# obd can1 request device 751 752 1802ff00
751[752] 1802ff: ERROR: request failed with response error code 12 subFunctionNotSupported
This is clear of dtc codes?

1624253725.617633 1R11 751 03 14 ff 00 00 00 00 00
1624253725.618253 1R11 752 03 54 ff 00 13 e0 00 8e

Michael Balzer <dexter@expeedo.de> ezt írta (időpont: 2021. jún. 20., V, 13:54):
That log file is missing too many frames to be readable, and the logger should have told you that.

Maybe your OVMS has an SD speed issue? Have you tried raising the optimization hints?
https://docs.openvehicles.com/en/latest/crtd/can_logging.html#optimizing-the-performance

Anyway, it seems your tool queries at least the four ECUs defined in the source. It uses diag session 0x92 (i.e. request 1092), and then request 1800ff00 to retrieve the DTCs.

18 is not a standard UDS command, but some VW ECUs (especially the TP2.0 ones) also use this (but there it's 1802ff00).

You can try other subfunctions, i.e. 1801, 1802, etc. to see if you get something else than "subfunction not supported".

To clear the DTCs, the tool seems to use the standard command 14, but with non-standard parameters: the log has a request 14ff00 to 771 (but the response is missing).

Due to the missing frames, your DTCs are not readable in the log. Try to get a log without dropped frames.

Regards,
Michael


Am 20.06.21 um 09:02 schrieb Tamás Kovács:
a) a test with another two device
b) nothing working
c) if i use 19 Poll type and vehicle set to trio no response, if vehicle empty set get 80-error code

If i connect simultaneously another device can i capture the DTC code reading with ovms using a Y OBD cable?

My car always have a U1113 DTC error because not have a EV-REMOTE ECU. I have a log file created with ovms when i read and clean the dtc codes with hobdrive. Another error codes: P1A39 (BMU), P1A33 (BMU), P1A7E (CMU)

Michael Balzer <dexter@expeedo.de> ezt írta (időpont: 2021. jún. 19., Szo, 18:55):
Tamás,

a) are you sure the DTC is in device 761/762? There are three more devices in the i-MiEV source.

b) maybe you need to give another status mask, e.g. 1902ae or just all DTCs by 1902ff -- did you try that?

c) you can also try the other DTC retrieval subfunctions, e.g. 1901<mask> to get just the number of DTCs (see ISO spec for more)

Regards,
Michael

Am 19.06.21 um 18:13 schrieb Tamás Kovács:
Hi!

I would like to create a dtc reading on i-miEV/ Peugeot iOn. But if is send the following command:
OVMS# obd can1 request device 761 762 19020f
761[762] 19020f: request failed with response error code 80

I now use hobdrive app to read dtc code with OBDlink LX


-- 
Michael Balzer * Helkenberger Weg 9 * D-58256 Ennepetal
Fon 02333 / 833 5735 * Handy 0176 / 206 989 26
_______________________________________________
OvmsDev mailing list
OvmsDev@lists.openvehicles.com
http://lists.openvehicles.com/mailman/listinfo/ovmsdev


--
Üdvözlettel:
Kovács Tamás


_______________________________________________
OvmsDev mailing list
OvmsDev@lists.openvehicles.com
http://lists.openvehicles.com/mailman/listinfo/ovmsdev


-- 
Michael Balzer * Helkenberger Weg 9 * D-58256 Ennepetal
Fon 02333 / 833 5735 * Handy 0176 / 206 989 26
_______________________________________________
OvmsDev mailing list
OvmsDev@lists.openvehicles.com
http://lists.openvehicles.com/mailman/listinfo/ovmsdev


--
Üdvözlettel:
Kovács Tamás