Sorry for all of the emails, I just figured you would want to know how testing is going.
Never mind the earlier ones - TPMS data has re-appeared. I think that I needed to do a drive after the module was re-installed to get the data read in (not sure about that). I have opted in to charge logging, so you can see what is happening.
STAT?Standard - Charging
232V/40A
Full: 88 mins
SOC: 73%
Ideal Range: 133 mi
Est. Range: 125 mi
ODO: 22,715.3 mi
CAC: 147.76
ACC STAT
ACC Status #1
39.072536, -77.131168
Enabled
Cooldown
Charge by time 03:44:00
Mode: standard (0A)
Your vehicle id
ROADSTER76
Output of base64 parameter string (from the cellphone app)
AqkrEWe+Gt4BQwAA4AAAAAAAAAA=
- Date/Time you entered the ACC location (with timezone)
- 22 September 2013 15:41 EST
- Date/Time you plugged in at the ACC location (with timezone)
- 22 September 2013 approx 16:45 EST
- In the smartphone app, call up the Features and Parameters screens (so the server logs those, and I can check)
- Done.
Description of the problem you have
I set the ACC params for Cooldown, Chargeby 08:00, and Standard mode. When I plugged in, the charge started immediately, with no cooldown phase (probably expected, since the battery is already below the threshold). Further attempt to request a cooldown made no change. Standard mode charge proceeded, even though I would have expected a timed charge to start some time tomorrow morning (and the STAT? command now reports time to full at just 88 minutes).
Also, I set CHARGEBY for 08:00, but the ACC STAT return seems to indicate it is set for 44 minutes after the time specified. If it were working, it would be late.
Now that I look at it again, I don't understand the time setting at all. I followed your insructions to use a leading "-" as I am West of GMT. I would expect the reported CHARGEBY time to be either 08:00 (local) or 13:00 (GMT), but I'm seeing 03:44.
Many thanks - will try to help with any testing you need in a timely manner.
......curt