2016-05-29 2.8.6 Firmware 2.8.6 SIM808 GSM/GPS production support
# Framework: - Support for separate charger temperature (car_tcharger)
# Twizy user guide v1.8 (BMS power limit bypass)
# Twizy documentation: - Added command overview
# Twizy documentation: - Added limiter designer to powermap calculator
# Twizy documentation: - Added some more registers to SDO list
# Leaf: reformat using mplabx 'whitesmiths' formatting rules, no code changes
# Merge carrott/nissan-leaf-reformat enhancements for Nissan Leaf
# Twizy: minor documentation fixes & additions
# Merged Kia Soul 0.46 06 Mar 2016 (Geir Øyvind Vælidalo)
# Leaf: - TCU messages aren't suitable for car state selection
# Leaf: - Use presence of inverter messages to indicate car on and driving
# Leaf: - Use bus inactivity to indicate car off
# Leaf: - use presence of ABS messages to indicate driving - add some TODO
# Leaf: extract car on-off to a function
# Leaf: when ABS messages stop, car must be off, even if CAN bus is still active
# Leaf: understand waiting for charge timer
# Leaf: Refactor charger status logic
# Leaf: extract gids out to a separate value
# Leaf: turn off polling as it causes a relay to click every 20 seconds while charging
# Leaf: don't update charger state when the can bus goes quiet as charger has already told us what happened
# Leaf: use J1772 pilot maximum current to set the pilot and charge door bits
# Leaf: use unambiguous variable types
# Leaf: initialize SOC and SOC alert to avoid SMS on startup
# Merge pull request #147 from carrott/nissan-leaf
# Deterministic TRISC & PORTC init in each module
# led_set should turn on the chosen led, not OVMS_LED_O - 1 == RC3 when digit == OVMS_LED_ON
# Merge pull request #148 from carrott/deterministic-portc
# Fix for twizy to allow production builds with OVMS_TWIZY_BATTMON
# Firmware build restructuring for SIM808 support, and basic GPS support for SIM808
# SIM808 GPS fetch & coordinate processing - "GPS?" command optimized GM link, extended by OSM link
# Added modem power up on module power up - Diag mode clients reworked for SIM808 operation
# RT documentation: added modem terminal speed fix for diag mode
2016-03-14 2.8.5 Firmware 2.8.5 SIM808 GSM/GPS module support
# Fix for Twizy build w/o BATTMON
# Twizy: ideal range calculated with temperature influence approximation
# Twizy: Battery capacity estimation
# Twizy: Charge start restarts SOC window (to get most recent BMS SOC)
# Twizy: Charge interruption no longer restarts power sums & SOC window
# Added vehicle_version to net msg "F"
# New vehicle: Kia Soul EV, initial version 0.1 (alpha/untested)
# Kia Soul: VIN, car status, doors & charging status, SOC, estimated range, speed
# Framework: OBDII polling support for modes 02, 10 & 21
# Kia Soul: DEBUG diag output fixed for SMS size limit
# Kia Soul: ISR optimization - OBD diag data init & length debugging
# Kia Soul: Buffer overflow protection for OBDII multi frame polls
# Kia Soul: Init CAN RX filter 1 to avoid noise triggers
# Twizy: optional current limit modification
# Added compiler switch OVMS_NO_CRASHDEBUG
# Twizy V3.7.0: - CFG POWER: max current control, higher torque & power levels
# Framework v2.8.2: DIAG mode: support backspace & ctrl-a / ctrl-c (= abort/clear)
# Framework v2.8.2: DIAG mode perl clients added
# Framework v2.8.2: DIAG mode documentation extended
# Add hints on 0x100/0x96 and 0x400/0x01
# Framework: Fixed base64decode(), removed bug workarounds
# Framework: base64encode(): return pointer to end of base64 string
# Framework: New net_assert_caller(): check caller, fallback to REGPHONE
# Framework: net_put RAM redirection now uses net_buf[]
# Framework: Code cleanup, size and stack depth optimization
# Framework: Fix: stack overflow/underflow flags cleared after crash
# Framework: Perl diagmode clients: missing license info added
# Twizy: Flux map optimization
# Twizy: Fix: "CA?" outputs ETR SOC if ETR range is zero
# Twizy: CAN control bits to disable emergency reset, kickdown & autopower
# Twizy: Flux & saturation maps added to documentation
# Twizy: Updated SDO list & limits
# MPLABX 3.1x support, and OVMS_BUILDCONFIG to show selected build config in version strings
# Add pics and docs on Tesla Model S new style DIAG connector seen in late 2015 cars onwards
# Re-work GPS initialisation for SIM808
# Use AT+CGPSRST=0 for cold start of GPS
# Fix SMS VERSION command