Chris,
the fix isn't meant to eliminate bus errors, it just should solve
the log errors.
I.e. you should now see exactly those frames in the TX log, that
you transmit.
TX_Fail log entries can result from actual bus errors as well as
from TX queue overflows.
TX queue overflows are counted separately, see can can3
status. If you have TX overflows, you need to raise the
queue size.
Regards,
Michael
Am 18.09.20 um 19:38 schrieb Chris
van der Meijden:
I did a first test with mixed results.
I don't see the Asynchronous Errors anymore, but I see
TX_FAIL messages and neither unlocking nor climate control
works with the patch.
I will continue on monday with some deeper checks and I
hope I can produce some
log output then.
Regards
Chris
_______________________________________________
OvmsDev mailing list
OvmsDev@lists.openvehicles.com
http://lists.openvehicles.com/mailman/listinfo/ovmsdev
_______________________________________________
OvmsDev mailing list
OvmsDev@lists.openvehicles.com
http://lists.openvehicles.com/mailman/listinfo/ovmsdev