It went christmas animation nuts as soon as I plugged it on the bus (already contact ON+GO), and went away the second I unplugged it.
I admit having left the v2 (which still carries all my profiles, and in case I needed to limit power+recup on the way as it’s been snowing again)
My bet is that there where too many CAN terminations on the bus and the dashboard cluster couldn’t see it’s friends, I’ll give it a shot without v2 on my way back home.
(Which leads me to believe the termination resistor on my Arduino OBD shields aren’t connected)
JB./.
On 19 Mar 2018 at 12:43 +0100, Michael Balzer <dexter@expeedo.de>, wrote:
Uh oh… CAN bus contact failure? I haven't had any issues like that…
Am 19.03.2018 um 11:09 schrieb Julien “JaXX” Banchet:
On 19 Mar 2018 at 10:07 +0100, Julien “JaXX” Banchet
<jaxx@jaxx.org>, wrote:
Gonna put it in the car (despite the passive GPS issue)
_______________________________________________
OvmsDev mailing list
OvmsDev@lists.teslaclub.hk
http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
--
Michael Balzer * Helkenberger Weg 9 * D-58256 Ennepetal
Fon 02333 / 833 5735 * Handy 0176 / 206 989 26
_______________________________________________
OvmsDev mailing list
OvmsDev@lists.teslaclub.hk
http://lists.teslaclub.hk/mailman/listinfo/ovmsdev