Chris,

as you changed two parameters at once, you cannot currently tell which helped.

I suggest keeping the improved 12V level and returning to the old CAN timing to see if that makes a difference.

Reviewing your report & findings, I'd say your issue was caused by the 12V dips.

Regards,
Michael

Am 11.04.25 um 20:01 schrieb Chris Box:

On 2025-04-06 11:03, Michael Balzer via OvmsDev wrote:

Did the changed CAN timing to better follow the SAE recommendations actually have any benefits?

 

I haven't experienced any Leaf errors using the SAE timing over the past month. As a result my intention is to continue with this new timing, although I can't prove the timing is the reason for the lack of issues. I also improved 12 volt levels.

 

If you're looking for hard data, please advise what I should do to gather that data. It's not particularly clear to me, because I understand that "normal" can bus statistics for the Leaf include some expected errors.

 

Thanks

Chris

-- 
Michael Balzer * Am Rahmen 5 * D-58313 Herdecke
Fon 02330 9104094 * Handy 0176 20698926

_______________________________________________
OvmsDev mailing list
OvmsDev@lists.openvehicles.com
http://lists.openvehicles.com/mailman/listinfo/ovmsdev

-- 
Michael Balzer * Am Rahmen 5 * D-58313 Herdecke
Fon 02330 9104094 * Handy 0176 20698926