Matt,

It has everything needed to _capture_, but limited storage and no serial port (ok, it has one, but it is connected to the modem).

There is a sneaky way of doing it (turn on modem echo, then output the logs to the modem and capture the echo-back on the DIAG port), but that is limited in speed and very kludgy.

Regards, Mark.

On 29 Apr, 2013, at 3:09 PM, Matt Beard wrote:

I would hope that there is a way to use OVMS hardware for CAN logging. It seems pointless to need a separate CAN logger when the OVMS hardware has everything needed to log the bus.

Matt


On Monday, April 29, 2013, Nikki Gordon-Bloomfield wrote:
HI Matt, Thomas, 

I'd suggest at least one of you will need some form of CAN logger. Either a purpose-built device, or something that you can connect to a serial or USB port to pull date from your car? 

See the roadster logs in GitHub ;) 



Nikki.


On 29 Apr 2013, at 07:22, Matt Beard <matt@beard.tv> wrote:

Hi, I have a C-Zero and would like OVMS support. I am currently considering buying a unit and would be able to help with development if/when I get one.

Matt Beard

On Monday, April 29, 2013, Thomas Bergo wrote:
Hi

As a owner of a i-Miev I'm interested in OVMS support for the i-Miev/C-Zero/iOn EV.

Has anyone looked into supporting those EV?

I'm planing to start looking into adding support for those EV. And asking for help to add a vehicle plug-in module stub for those cars, so that naming and so on is correct.

Best regards
Thomas B

_______________________________________________
OvmsDev mailing list
OvmsDev@lists.teslaclub.hk
http://lists.teslaclub.hk/mailman/listinfo/ovmsdev

_______________________________________________
OvmsDev mailing list
OvmsDev@lists.teslaclub.hk
http://lists.teslaclub.hk/mailman/listinfo/ovmsdev