<div dir="ltr">Some good news, after getting a minimum quantity quote of 100pcs from the Bulgarian distributor, I asked the Alibaba manufacturer for a 10pcs set of housings and 200 pins of each, and was actually very helpful, just quoted me a bit extra per piece. I got the connectors the other day and I'm now testing what would be the max double wire size to crimp to the pins without a problem, seems to be around 0.14-0,25mm2., I also got some AMP Multilock automotive connectors for the OVMS side of the Y cable, So it's easier to change to another CAN bus, instead of crimping a D-Sub cable directly.<br><br>So if any dev in Europe with a Kona is interested, send me a message.<div><br></div><div>Oscar</div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Fri, Feb 3, 2023 at 3:34 PM Christos Oscar Kambiselis <<a href="mailto:ckambiselis@gmail.com">ckambiselis@gmail.com</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div dir="ltr">Also forgot to say that since I don't want to damage any of the original cables I am looking to make a Y-cable for the connector where all the CAN busses connect to the gateway, the connector is made by KUM (a Korean manufacturer who's website I can't reach), and who's connectors don't seem to be distributed by any of the bigger distributors I usually buy parts from (Mouser, Digikey, Farnel, TME, Elfa Distrelec) and can't even find them on Aliexpress, I did find a Chinese manufacturer on Alibaba that makes a clone but their minimum order is 200pcs 3$/pcs. <div><br></div><div>I also found a Bulgarian connector and wire harness distributor that has the originals and I'm waiting for a quote for 10pcs of male/female, there is also a US based surplus connector seller that sells them for 20$ a piece which is absurd.</div><div><br></div><div>The part names are HSC16M-W(GY) ASSY and HSC16F-W(GY) ASSY but the part numbers are HK111-16011 and HK115-16011, and the pins are TK101-00110 and TK105-00110.</div><div><br></div><div>Oscar</div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Wed, Feb 1, 2023 at 9:29 PM Peter Lord <<a href="mailto:peter@plord.co.uk" target="_blank">peter@plord.co.uk</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div><br><div><br><blockquote type="cite"><div>On 1 Feb 2023, at 17:09, Christos Oscar Kambiselis <<a href="mailto:ckambiselis@gmail.com" target="_blank">ckambiselis@gmail.com</a>> wrote:</div><br><div><div dir="ltr">I have, for my 2019 Kona Electric, the maps of the whole CAN bus network, pinouts of connectors and schematics of the wiring on PDF, these can all be found at service.hyundai-motor (dot) com, when accessed from Europe, the access costs 15€ for 24h or 60€ for a whole week, it's all official service manual info and much more for independent repair shops. I also have a couple of contactless CAN bus readers plus the direct connection to D-CAN through the OBD. My car only has the 8inch Standard Navi without the mobile data connection, but from the info I have gathered the only CAN bus connected to the larger "conected" navi is the same M-CAN that the standard version has, so the remote AC control should be possible, through M-CAN.</div></div></blockquote><div><br></div><div><br></div><div>I’ve also got an early Kona :-)</div><div><br></div><div>Last time I took a look at the service site it only contained hardware details … so no PID details</div><div><br></div><div><br></div><blockquote type="cite"><div><div dir="ltr"><div><br></div><div>I was thinking to connect the contactless readers to my logic analyzer plus one channel to a button to act as a marker, and record a known sequence of events, marking each event start with the button for easier searching. I also have access to 100kW DC fast chargers and 22kW AC chargers, including their CAN data when I have my car charging.</div><div><br></div></div></div></blockquote><br></div><div><br></div><div>Okay, that sounds like it would be useful :-)</div><div><br></div><div><br></div><br><div>
<div dir="auto" style="color:rgb(0,0,0);letter-spacing:normal;text-align:start;text-indent:0px;text-transform:none;white-space:normal;word-spacing:0px;text-decoration:none">
<span>---</span>
<span><br></span>
<span>Peter Lord</span>
<span><br><br></span>
<table><tbody><tr>
<td><a href="mailto:peter@plord.co.uk" alt="Email" target="_blank">
<img src="https://www.freepnglogos.com/uploads/blue-email-logo-png-4.png" width="30" height="30" alt="Email">
</a></td>
<td><a href="https://signal.me/#p/+447867970260" target="_blank">
<img src="https://avatars.githubusercontent.com/u/702459" width="30" height="30" alt="Signal">
</a></td>
<td><a href="https://telegram.me/PeterLord" target="_blank">
<img src="https://avatars.githubusercontent.com/u/6113871" width="30" height="30" alt="Telegram">
</a></td>
<td><a href="https://github.com/plord12" target="_blank">
<img src="https://avatars.githubusercontent.com/u/9919" width="30" height="30" alt="Github">
</a></td>
<td><a>
<img src="https://avatars.githubusercontent.com/u/10639145" width="30" height="30" alt="Apple">
</a></td>
<td></td>
</tr></tbody></table>
</div>
</div>
<br></div>_______________________________________________<br>
OvmsDev mailing list<br>
<a href="mailto:OvmsDev@lists.openvehicles.com" target="_blank">OvmsDev@lists.openvehicles.com</a><br>
<a href="http://lists.openvehicles.com/mailman/listinfo/ovmsdev" rel="noreferrer" target="_blank">http://lists.openvehicles.com/mailman/listinfo/ovmsdev</a><br>
</blockquote></div>
</blockquote></div>