<div dir="ltr">I have, for my 2019 Kona Electric, the maps of the whole CAN bus network, pinouts of connectors and schematics of the wiring on PDF, these can all be found at service.hyundai-motor (dot) com, when accessed from Europe, the access costs 15€ for 24h or 60€ for a whole week, it's all official service manual info and much more for independent repair shops. I also have a couple of contactless CAN bus readers plus the direct connection to D-CAN through the OBD. My car only has the 8inch Standard Navi without the mobile data connection, but from the info I have gathered the only CAN bus connected to the larger "conected" navi is the same M-CAN that the standard version has, so the remote AC control should be possible, through M-CAN.<div><br></div><div>I was thinking to connect the contactless readers to my logic analyzer plus one channel to a button to act as a marker, and record a known sequence of events, marking each event start with the button for easier searching. I also have access to 100kW DC fast chargers and 22kW AC chargers, including their CAN data when I have my car charging.</div><div><br></div><div>Oscar</div></div>