<div dir="ltr">So FYI, I've got an Optus (Australia) Sim successfully working with upstream 3.3.003-5-gb70e4e3a   plus my ioniq 5 mods (so nothing Sim related).<div><br></div><div>//.</div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Wed, 28 Sept 2022 at 05:09, Craig Leres <<a href="mailto:leres@xse.com">leres@xse.com</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">On 9/27/22 00:43, Michael Balzer wrote:<br>
> Craig, does my patch help in your case?<br>
<br>
"Yes," he said cautiously. I booted with your patch almost 3 days ago <br>
and have had zero netreg issues since then. But I have had a bunch of <br>
"no satellites in view." But when this happens it usually happens with <br>
both cars around the same time (and the issue clears up at the same time <br>
as well). This makes me suspect some difference in the SIM7600 GNSS <br>
hardware vs. the signal my cars see in my garage. Or maybe a modem <br>
firmware issue since I wouldn't expect *all* satelltes to go away at the <br>
same time. I moved my dev module out to the garage on Sunday (using a <br>
spare C6 Corvette onstar antenna brick for cell and GNSS) but I didn't <br>
get it instrumented until a few hours ago so I don't have history for it <br>
yet. But I'm expecting it to track whatever problems the other two <br>
modules have.<br>
<br>
 > There's another report on lost GSM communication with the latest edge<br>
 > release:<br>
 > <a href="https://www.openvehicles.com/comment/8871#comment-8871" rel="noreferrer" target="_blank">https://www.openvehicles.com/comment/8871#comment-8871</a><br>
<br>
To me that thread covers two out of three of my issues; canbus and GSM.<br>
<br>
I took a look at the logs for one module and it looks like there is some <br>
correlation between satcount=0 and not being able to connect to the v2 <br>
and v3 servers; this happened at 4:54 and 5:36 PDT today, I'll attach <br>
logs for today. The repeated "mongoose: mg_ssl_if_mbed_err ... SSL <br>
error: -1" errors caught my eye.<br>
<br>
Oh and I notice now that when satcount=0, gpshdop=500 (I didn't know it <br>
could go so high!)<br>
<br>
                Craig<br>
<br>
<br>
_______________________________________________<br>
OvmsDev mailing list<br>
<a href="mailto:OvmsDev@lists.openvehicles.com" target="_blank">OvmsDev@lists.openvehicles.com</a><br>
<a href="http://lists.openvehicles.com/mailman/listinfo/ovmsdev" rel="noreferrer" target="_blank">http://lists.openvehicles.com/mailman/listinfo/ovmsdev</a><br>
</blockquote></div>