<html><head></head><body><div class="ydp76942f67yahoo-style-wrap" style="font-family:Helvetica Neue, Helvetica, Arial, sans-serif;font-size:16px;"><div></div>
<div dir="ltr" data-setdir="false">Hi,</div><div dir="ltr" data-setdir="false"><br></div><div dir="ltr" data-setdir="false">I have found a lot of info like this in the tech doc I have</div><div dir="ltr" data-setdir="false"><br></div><div dir="ltr" data-setdir="false">"<div>Using the Jaguar Land Rover approved diagnostic equipment, check datalogger signal – Vehicle Speed (0xDD09) Ensure that vehicle speed is transmitted and updated correctly. Clear the DTCs and retest. If fault persist using the Jaguar Land Rover Approved Diagnostic Equipment, reconfigure the door module with the latest level software. Clear the DTCs and retest <br><br></div><div>"</div><div><br></div><div dir="ltr" data-setdir="false">What do you think I can do with the info "0xDD09" ? a PID ?<br></div></div><div dir="ltr" data-setdir="false"><br></div><div dir="ltr" data-setdir="false"><div>The communications networks available on the vehicle are shown below: <br><div>- High Speed (HS) CAN chassis systems bus
</div><div>- HS CAN body systems bus
</div><div>- HS CAN Human Machine Interface (HMI) systems bus <br></div><div>- HS CAN power mode zero systems bus
</div><div>- Flexray
</div><div>- Local Interconnect Network (LIN)
</div><div>- Private bus </div><br></div><div dir="ltr" data-setdir="false">Didier<br></div></div><div><br></div>
</div><div id="yahoo_quoted_0716136144" class="yahoo_quoted">
<div style="font-family:'Helvetica Neue', Helvetica, Arial, sans-serif;font-size:13px;color:#26282a;">
<div>
Le lundi 4 janvier 2021 16 h 07 min 34 s UTC−5, didier@ernotte.com <didier@ernotte.com> a écrit :
</div>
<div><br></div>
<div><br></div>
<div><div id="yiv1542244928"><div><div class="yiv1542244928ydp9a264b55yahoo-style-wrap" style="font-family:Helvetica Neue, Helvetica, Arial, sans-serif;font-size:16px;"><div></div>
<div dir="ltr">Hi Michael,</div><div dir="ltr"><br clear="none"></div><div dir="ltr">Even if I used to be a good programmer, and I can still read a C++ application even if I did not programmed in C++ since more than 20 years, I've never been a "hacker", so this is quite new to me. <br clear="none"></div><div dir="ltr">I have ran the couple of command you gave me : <br clear="none"></div><div dir="ltr">- the copen scan does not do anything</div><div dir="ltr">- the "<span><font style="background-color:inherit;" face="monospace">obdii can1 request broadcast 0100</font></span>", (and 0120, 0140, 0160, 0180...) returned a 32 bits that I can decode to identify which PID is supported, but only one ECU (7df) answered to the broadcast. I guess there is many other, but they don't respond to the broadcast. <br clear="none"></div><div dir="ltr">I don't understand why the "<span><font style="background-color:inherit;" face="monospace">re obdii scan start 1 7df 0 20</font></span>" does not give me an anser for the identifyed PID of the previous "broadcast" command .</div><div dir="ltr">In the broadcast command, when we send "0100", the first byte seems to be a "mode", and the second the PID, is it correct ? (as described in the vehicle.h).</div><div dir="ltr">I still don't see how I can have a full list of ECU ID, and a full list of PID for each ECU. Maybe that is why retro engineering is complex, <br clear="none"></div><div dir="ltr">I don't also understand the impact of selecting a vehicle in the web session. Since my Jaguar is not supported yet, I select the OBDII car , but if I select the nissan leaf, I can see more data, which does not make sense, unless we ned to "wake up" some ECU in order to pull some info. Is the OVMS device masking some data in the bus? how can I see everything on the bus ?</div><div dir="ltr">Thanks for your help.</div><div dir="ltr">I will definitively take a look at your new page.<br clear="none"></div><div dir="ltr"><br clear="none"></div><div dir="ltr">Didier<br clear="none"></div><div dir="ltr"><br clear="none"></div><div><br clear="none"></div>
</div><div class="yiv1542244928yahoo_quoted" id="yiv1542244928yahoo_quoted_0062361247">
<div style="font-family:'Helvetica Neue', Helvetica, Arial, sans-serif;font-size:13px;color:#26282a;">
<div>
Le lundi 4 janvier 2021 15 h 28 min 10 s UTC−5, Michael Balzer <dexter@expeedo.de> a écrit :
</div>
<div><br clear="none"></div>
<div><br clear="none"></div>
<div><div class="yiv1542244928yqt6710073448" id="yiv1542244928yqt03840"><div dir="ltr">Didier,<br clear="none"><br clear="none">Am 31.12.20 um 10:47 schrieb Michael Balzer:<br clear="none">> Most OBD2 devices won't respond to broadcasts though. To identify <br clear="none">> them, you need to send a test request to all CAN IDs in your assumed <br clear="none">> ID range. The scan tools for this are below "re obdii scan":<br clear="none"><br clear="none">I've just added a first UI for that scanner: <br clear="none"><a rel="nofollow noopener noreferrer" shape="rect" target="_blank" href="https://docs.openvehicles.com/en/latest/plugin/repidscan/README.html">https://docs.openvehicles.com/en/latest/plugin/repidscan/README.html</a><br clear="none"><br clear="none">Feedback is welcome.<div class="yiv1542244928yqt4211668254" id="yiv1542244928yqtfd69813"><br clear="none"><br clear="none">Regards,<br clear="none">Michael<br clear="none"><br clear="none">-- <br clear="none">Michael Balzer * Helkenberger Weg 9 * D-58256 Ennepetal<br clear="none">Fon 02333 / 833 5735 * Handy 0176 / 206 989 26<br clear="none"><br clear="none"></div></div></div><div class="yiv1542244928yqt4211668254" id="yiv1542244928yqtfd57574">_______________________________________________<br clear="none">OvmsDev mailing list<br clear="none"><a rel="nofollow noopener noreferrer" shape="rect" ymailto="mailto:OvmsDev@lists.openvehicles.com" target="_blank" href="mailto:OvmsDev@lists.openvehicles.com">OvmsDev@lists.openvehicles.com</a><br clear="none"><a rel="nofollow noopener noreferrer" shape="rect" target="_blank" href="http://lists.openvehicles.com/mailman/listinfo/ovmsdev">http://lists.openvehicles.com/mailman/listinfo/ovmsdev</a><br clear="none"></div></div>
</div>
</div></div></div><div class="yqt6710073448" id="yqt94451">_______________________________________________<br clear="none">OvmsDev mailing list<br clear="none"><a shape="rect" ymailto="mailto:OvmsDev@lists.openvehicles.com" href="mailto:OvmsDev@lists.openvehicles.com">OvmsDev@lists.openvehicles.com</a><br clear="none"><a shape="rect" href="http://lists.openvehicles.com/mailman/listinfo/ovmsdev" target="_blank">http://lists.openvehicles.com/mailman/listinfo/ovmsdev</a><br clear="none"></div></div>
</div>
</div></body></html>