<div dir="auto">All, <div dir="auto">I've included the ability to switch can bus to the Poller rework by adding an extra field to the PIDPollList structure. <div dir="auto"><br></div><div dir="auto">It should not break any vehicle specific code, but will throw a compile warning if the bus is not specified in the list. Once Michael has reviewed it, appreciate retesting.</div><div dir="auto"><br></div><div dir="auto">Note the changes to 0x22 message length required a code change in the Leaf as it uses an incoming message length test. May be worth checking other vehicle types for this.</div><div dir="auto"><br></div><div dir="auto">Hopefully these changes will resolve some of the potential reasons for the Leaf crashing the ovms module.</div><div dir="auto"><br></div><div dir="auto">Looking good so far 👍 </div><div dir="auto"><br></div><div dir="auto">Cheers Derek </div></div></div>