Hi guys,<br><br>Question for the CAN and ECU experts:<br><br>I am logging into the battery charger ECU on my eUp via the extended diag session code. Otherwise I get 7F as reply. <br><br>I am interested in the power efficiency (pe) and power loss (pl) values.<br><br>It seems though as they have another timeout than the ext diag session as I am polling it every 5 seconds. So ext diag is "always on". <br><br>But after 20 minutes during charging the values change from the realistic ones to pe=100% and pl=0. To get the real values back I have to unlock the car and turn the ignition. Then I can turn off and lock the car again. <br><br>Now to the question: Is this behaviour somehow known from other vehicles as well or can it be an error in my code not sending the ext diag msg correctly?<br><br>Although when I dont send it at all I dont get even a value for pe and pl, just the 7F error msg. <br><br>So do you think it is possible to get those values for longer than 20 mins without having to turn the ignition? Or am I out of luck here as it seems to be some VW specific thing...<br><br>thx<br>Soko