<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
</head>
<body>
Welcome Derek,<br>
<br>
I've got a rework of the wifi component near done that allows to use
scanning mode in apclient configuration. I think I can push the
changes tomorrow & suggest you'll be my beta tester ;-)<br>
<br>
Regards,<br>
Michael<br>
<br>
<br>
<div class="moz-cite-prefix">Am 09.07.20 um 20:50 schrieb Derek
Caudwell:<br>
</div>
<blockquote type="cite"
cite="mid:CAKUcfWFUou6q-PGaZGxJh2iZa48=Lyho-ehfOBGyqQ37C7S4Wg@mail.gmail.com">
<meta http-equiv="content-type" content="text/html; charset=UTF-8">
<div dir="ltr">Hi devs,
<div><br>
</div>
<div>I recently received the ovms hardware and have been trying
to setup the unit so I can solely use the wifi AP+client. In
NZ 3G is soon to be sunset and for my needs I don't really
need a connection when I'm driving (and want to make sure
everything is behaving nicely on the can bus before I do). </div>
<div><br>
</div>
<div>I realise AP+client brings it limitations however hopefully
some of these can be worked around as I want to be able to use
the dashboard/plugins as well as the mobile app. I am new to
C/ESP32 programming and the code base so I thought it best to
ask a few questions before I begin tinkering with it.</div>
<div><br>
</div>
<div>Ideally I want the unit on loss of connection to an AP to
try and find another AP that has been set in the wifi config
and connect. The parts I am not too sure are as follows:</div>
<div> - on boot the code uses the default wifi ssid, if the
default is not available how does the code try and switch to
one of the other saved APs?</div>
<div> - can multiple APs be saved to the wifi config memory
and handled by ESP32? or do they need to be retrieved from
ovms config, wifi client details set, try connect and
enumerated through?</div>
<div> - I assume EventTimer10 is the logical place to add extra
code if required to enumerate through APs and try to connect?
similar to EventScanWifiDone when in SClient mode</div>
<div> - What is the reason scanning mode is unavailable for
AP+client mode in auto init, from the ESP32 documentation it
appeared to be usable still but with limitations? </div>
<div><br>
</div>
<div>Thanks in advance for any pointers and background.</div>
<div><br>
</div>
<div>Cheers Derek</div>
</div>
<br>
<fieldset class="mimeAttachmentHeader"></fieldset>
<pre class="moz-quote-pre" wrap="">_______________________________________________
OvmsDev mailing list
<a class="moz-txt-link-abbreviated" href="mailto:OvmsDev@lists.openvehicles.com">OvmsDev@lists.openvehicles.com</a>
<a class="moz-txt-link-freetext" href="http://lists.openvehicles.com/mailman/listinfo/ovmsdev">http://lists.openvehicles.com/mailman/listinfo/ovmsdev</a>
</pre>
</blockquote>
<br>
<pre class="moz-signature" cols="72">--
Michael Balzer * Helkenberger Weg 9 * D-58256 Ennepetal
Fon 02333 / 833 5735 * Handy 0176 / 206 989 26
</pre>
</body>
</html>