<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
</head>
<body text="#000000" bgcolor="#FFFFFF">
Mark,<br>
<br>
btw: is EGPIO_1 not free for general use? The esp32can SN65 seems to
be controlled by that line.<br>
<br>
Regards,<br>
Michael<br>
<br>
<br>
<div class="moz-cite-prefix">Am 21.04.19 um 15:01 schrieb Mark
Webb-Johnson:<br>
</div>
<blockquote type="cite"
cite="mid:D67D6DAB-6EF3-428D-9B5F-0ADF237A3BC0@webb-johnson.net">
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
If changing vehicle.{h, cpp} framework, I suggest leaving a hook
in to allow the vehicle module to override / supplement this. In
particular, the brake light may be controllable via can message on
some vehicles.
<div class=""><br class="">
</div>
<div class="">You can look at the ext12v circuit to see how to
control this.</div>
<div class=""><br class="">
</div>
<div class="">The ext12v system is a switchable 12v line already
wired up and available on DA26 expansion. Would be trivial to
put an external relay on that to switch brake lights.</div>
<div class=""><br class="">
</div>
<div class="">Regards, Mark.<br class="">
<div><br class="">
<blockquote type="cite" class="">
<div class="">On 21 Apr 2019, at 1:32 AM, Tamás Kovács <<a
href="mailto:kommykt@gmail.com" class=""
moz-do-not-send="true">kommykt@gmail.com</a>> wrote:</div>
<br class="Apple-interchange-newline">
<div class="">
<div dir="ltr" class="">
<div dir="ltr" class="">
<div dir="ltr" class=""><span
style="font-family:monospace" class="">JP1 pin 1
(+3.3) ----- [ 680 Ohms ] ---+--- [ LED ] -----
pin 28 (GND)</span><br
style="font-family:monospace" class="">
<span style="font-family:monospace" class=""> </span><span
style="font-family:monospace" class=""> |</span><br
style="font-family:monospace" class="">
<span style="font-family:monospace" class=""> </span><span
style="font-family:monospace" class=""> pin
12 (EGPIO_8)</span><br class="">
</div>
<div dir="ltr" class=""><span
style="font-family:monospace" class=""><br
class="">
</span></div>
<div class=""><span style="font-family:monospace"
class="">I can connect a 680Ohm resistor first end
to pin1, a </span><font class="" face="monospace">second
end to pin12, and the led positive side to pin12
and negative to pin28(gnd). Now I have only 470ohm
resistor at home, I tested now with a 4V li-ion
battery and my red led power is 4mA. I can use
this (470Ohm) resistor or buy a 680Ohm.</font></div>
<div class=""><font class="" face="monospace">Tomorrow I
remove the OVMS module from my car, and create
some test, if the resistor (470Ohm) is OK. </font></div>
<div class=""><font class="" face="monospace">I used
this calculator for led series resistor
calculation (I used a red Led): </font><a
href="http://ledcalc.com/" class=""
moz-do-not-send="true">http://ledcalc.com</a></div>
</div>
</div>
<br class="">
<div class="gmail_quote">
<div dir="ltr" class="gmail_attr">Michael Balzer <<a
href="mailto:dexter@expeedo.de" class=""
moz-do-not-send="true">dexter@expeedo.de</a>> ezt
írta (időpont: 2019. ápr. 20., Szo, 11:16):<br
class="">
</div>
<blockquote class="gmail_quote" style="margin:0px 0px
0px
0.8ex;border-left-width:1px;border-left-style:solid;border-left-color:rgb(204,204,204);padding-left:1ex">
<div bgcolor="#FFFFFF" class=""> Be aware the MAX71317
outputs are open drain, so you need a pull up
resistor to e.g. +3.3. According to the data sheet,
the current should stay below 6 mA.<br class="">
<br class="">
I've just done a quick test wiring like this:<br
class="">
<br class="">
<tt class="">JP1 pin 1 (+3.3) ----- [ 680 Ohms ]
---+--- [ LED ] ----- pin 28 (GND)<br class="">
|<br
class="">
pin 12
(EGPIO_8)<br class="">
</tt><br class="">
Works as expected.<br class="">
<br class="">
Regards,<br class="">
Michael<br class="">
<br class="">
<br class="">
<div
class="gmail-m_7428775334725863850moz-cite-prefix">Am
19.04.19 um 09:59 schrieb Michael Balzer:<br
class="">
</div>
<blockquote type="cite" class=""> Sure.<br class="">
<br class="">
You need to route an EGPIO line to the DA26 port.
For a first test you can add a simple jumper on
expansion port pins 10/12 to route EGPIO_8 to
GEP_7 (= pin 21 on DA26).<br class="">
<br class="">
You should then be able to use the "egpio" command
to test your LED. EGPIO_1 … _8 labels correspond
to MAX7317 ports 2 … 9, so to control EGPIO_8, do:<br
class="">
<blockquote class=""><tt class="">OVMS# egpio
output 9 1 # EGPIO_8 on</tt><br class="">
<tt class=""><tt class="">OVMS# </tt> egpio
output 9 0 # EGPIO_8 off</tt><br class="">
</blockquote>
(correct me if I'm wrong, Mark)<br class="">
<br class="">
I wasn't aware there are other cars in need of
something like this. I'll think about adding the
logic as an option to the vehicle framework, but I
can send you some patch to test this on your
i-MiEV/clone first.<br class="">
<br class="">
Regards,<br class="">
Michael<br class="">
<br class="">
<br class="">
<div
class="gmail-m_7428775334725863850moz-cite-prefix">Am
19.04.19 um 09:24 schrieb Tamás Kovács:<br
class="">
</div>
<blockquote type="cite" class="">
<div dir="ltr" class="">I can add for testing a
simple led (with resistor) , same as
SimpleConsole (twizy OVMS V2), to show car is
recuperating, connected to DA26 external
expansion port?</div>
<br class="">
<div class="gmail_quote">
<div dir="ltr" class="gmail_attr">Michael
Balzer <<a
href="mailto:dexter@expeedo.de"
target="_blank" class=""
moz-do-not-send="true">dexter@expeedo.de</a>>
ezt írta (időpont: 2019. ápr. 19., P, 9:17):<br
class="">
</div>
<blockquote class="gmail_quote"
style="margin:0px 0px 0px
0.8ex;border-left-width:1px;border-left-style:solid;border-left-color:rgb(204,204,204);padding-left:1ex">
<div bgcolor="#FFFFFF" class=""> As the
Mitsubishi code also reads battery
current/power level from CAN, it would be
trivial to add the same logic there.<br
class="">
<br class="">
<br class="">
<div
class="gmail-m_7428775334725863850gmail-m_-4710357977456663205moz-cite-prefix">Am
19.04.19 um 06:52 schrieb Tamás Kovács:<br
class="">
</div>
<blockquote type="cite" class="">
<div dir="ltr" class="">
<div dir="ltr" class="">The Trio
(Mitsubishi I-Miev and clones) does
not activate the brake light on
recuperation on 2105 and older
models, if this is work is very
impressive.</div>
</div>
<br class="">
<div class="gmail_quote">
<div dir="ltr" class="gmail_attr">Michael
Balzer <<a
href="mailto:dexter@expeedo.de"
target="_blank" class=""
moz-do-not-send="true">dexter@expeedo.de</a>>
ezt írta (időpont: 2019. ápr. 18.,
Cs, 23:08):<br class="">
</div>
<blockquote class="gmail_quote"
style="margin:0px 0px 0px
0.8ex;border-left-width:1px;border-left-style:solid;border-left-color:rgb(204,204,204);padding-left:1ex">
<div bgcolor="#FFFFFF" class="">
Mark,<br class="">
<br class="">
that looks very good. Not sure
about general demand, but I think
we should have this to enable
simple custom hardware I/O
extensions.<br class="">
<br class="">
For the Twizy, I was thinking
about adding logic to control the
brake light from the module. The
Twizy does not activate the brake
light on recuperation, as that's
normally (untuned) not very
strong. But a tuned Twizy allows
one pedal driving, so needs this.<br
class="">
<br class="">
Looking at our case I also think
one custom extension board should
fit on top of the modem.<br
class="">
<br class="">
Regards,<br class="">
Michael<br class="">
<br class="">
<br class="">
<div
class="gmail-m_7428775334725863850gmail-m_-4710357977456663205gmail-m_-7334428458932344159moz-cite-prefix">Am
18.04.19 um 02:36 schrieb Mark
Webb-Johnson:<br class="">
</div>
<blockquote type="cite" class="">
It seems the attachments were
messed up, so attaching again…
<div class=""><br class="">
</div>
<div class="">Regards, Mark.</div>
<div class=""><br class="">
</div>
<br class="">
<fieldset
class="gmail-m_7428775334725863850gmail-m_-4710357977456663205gmail-m_-7334428458932344159mimeAttachmentHeader"></fieldset>
<br class="">
<fieldset
class="gmail-m_7428775334725863850gmail-m_-4710357977456663205gmail-m_-7334428458932344159mimeAttachmentHeader"></fieldset>
<div class=""><br class="">
<div class=""><br class="">
<blockquote type="cite"
class="">
<div class="">On 17 Apr
2019, at 10:07 PM, Mark
Webb-Johnson <<a
href="mailto:mark@webb-johnson.net"
target="_blank"
class=""
moz-do-not-send="true">mark@webb-johnson.net</a>>
wrote:</div>
<br
class="gmail-m_7428775334725863850gmail-m_-4710357977456663205gmail-m_-7334428458932344159Apple-interchange-newline">
<div class="">
<div dir="auto" class="">
<div dir="ltr"
class="">
<div class="">
<blockquote
id="gmail-m_7428775334725863850gmail-m_-4710357977456663205gmail-m_-7334428458932344159ntes-pcmail-quote"
style="margin:0px;padding:0px;font-family:微软雅黑" class=""><br class="">
</blockquote>
<blockquote
id="gmail-m_7428775334725863850gmail-m_-4710357977456663205gmail-m_-7334428458932344159ntes-pcmail-quote"
style="margin:0px;padding:0px;font-family:微软雅黑" class="">Design layout.
Looks good to
me, but open to
suggestions...</blockquote>
<blockquote
id="gmail-m_7428775334725863850gmail-m_-4710357977456663205gmail-m_-7334428458932344159ntes-pcmail-quote"
style="margin:0px;padding:0px;font-family:微软雅黑" class=""><br class="">
</blockquote>
<blockquote
id="gmail-m_7428775334725863850gmail-m_-4710357977456663205gmail-m_-7334428458932344159ntes-pcmail-quote"
style="margin:0px;padding:0px;font-family:微软雅黑" class="">We can make in
sets of three
PCBs, to keep
prices down.</blockquote>
<blockquote
id="gmail-m_7428775334725863850gmail-m_-4710357977456663205gmail-m_-7334428458932344159ntes-pcmail-quote"
style="margin:0px;padding:0px;font-family:微软雅黑" class=""><br class="">
</blockquote>
<blockquote
id="gmail-m_7428775334725863850gmail-m_-4710357977456663205gmail-m_-7334428458932344159ntes-pcmail-quote"
style="margin:0px;padding:0px;font-family:微软雅黑" class="">Regards, Mark<br
class="">
<br class="">
</blockquote>
</div>
</div>
<div dir="ltr"
class=""><br
class="">
On 8 Apr 2019, at
12:05 PM, Mark
Webb-Johnson <<a
href="mailto:mark@webb-johnson.net" target="_blank" class=""
moz-do-not-send="true">mark@webb-johnson.net</a>>
wrote:<br class="">
<br class="">
</div>
<blockquote
type="cite" class="">
<div dir="ltr"
class="">
<div class=""><br
class="">
</div>
A kit of 5 PCBs +
SIP edge
connectors +
mounting hardware,
unsoldered, would
be about US$15 +
shipping. About
US$3/board set.
With shipping I
don’t think this
is worth doing
with less than 3
or 5 boards per
kit.
<div class=""><br
class="">
</div>
<div class="">Would
this be useful?</div>
<div class=""><br
class="">
</div>
<div class="">Regards,
Mark.<br
class="">
<div class=""><br
class="">
<blockquote
type="cite"
class="">
<div class="">On
7 Apr 2019, at
9:08 PM, Mark
Webb-Johnson
<<a
href="mailto:mark@webb-johnson.net"
target="_blank" class="" moz-do-not-send="true">mark@webb-johnson.net</a>>
wrote:</div>
<br
class="gmail-m_7428775334725863850gmail-m_-4710357977456663205gmail-m_-7334428458932344159Apple-interchange-newline">
<div class="">
<div
dir="auto"
class="">
<div dir="ltr"
class="">This
is the closest
we have today:</div>
<div dir="ltr"
class=""><br
class="">
</div>
<div dir="ltr"
class=""><span
id="gmail-m_7428775334725863850gmail-m_-4710357977456663205gmail-m_-7334428458932344159cid:FB5D7C10-7B69-4ECC-98AF-C500BB6C39A3"
class=""><image1.jpeg></span></div>
<div dir="ltr"
class=""><br
class="">
</div>
<div dir="ltr"
class="">That
is a bare
modem board,
with just the
sip
connectors.
The prototype
above is a
K-line
transceiver.</div>
<div dir="ltr"
class=""><br
class="">
</div>
<div dir="ltr"
class="">I
think it would
be trivial,
and cheap, to
make up what
you show.
Perhaps just
solder ready
pads at 0.1”
pitch, then
the side sip
connectors
wired to the
first row of
pads at each
edge. Perhaps
5 PCBs in a
kit, with sip
edge
connectors,
unsoldered, in
a simple
plastic bag.</div>
<div dir="ltr"
class=""><br
class="">
</div>
<div dir="ltr"
class="">Does
that sound
like something
useful? If so,
I can ask the
China guys for
some idea of
pricing. If it
is just the
unsoldered
pcbs + parts,
I don’t think
it will be
expensive.</div>
<div dir="ltr"
class=""><br
class="">
</div>
<div dir="ltr"
class="">Regards,
Mark</div>
<div dir="ltr"
class=""><br
class="">
On 7 Apr 2019,
at 4:38 PM,
Michael Balzer
<<a
href="mailto:dexter@expeedo.de"
target="_blank" class="" moz-do-not-send="true">dexter@expeedo.de</a>>
wrote:<br
class="">
<br class="">
</div>
<blockquote
type="cite"
class="">
<div dir="ltr"
class="">
Mark,<br
class="">
<br class="">
do you know of
some kind of
prototyping
board
available that
fits to our
piggy back
expansion
layout?<br
class="">
<br class="">
Something like
this: <a
href="https://www.robotshop.com/de/de/cytron-arduino-proto-schild.html"
target="_blank" class="" moz-do-not-send="true">https://www.robotshop.com/de/de/cytron-arduino-proto-schild.html</a><br
class="">
<br class="">
Regards,<br
class="">
Michael<br
class="">
<br class="">
<br class="">
<div
class="gmail-m_7428775334725863850gmail-m_-4710357977456663205gmail-m_-7334428458932344159moz-cite-prefix">Am
03.04.19 um
06:48 schrieb
Mark
Webb-Johnson:<br
class="">
</div>
<blockquote
type="cite"
class="">
<div class=""><br
class="">
</div>
<div class="">If
you have work
to do on this
DA26 expansion
ports, this is
pretty cool
and well
built:</div>
<div class=""><br
class="">
</div>
<blockquote
style="margin:0px
0px 0px
40px;border:none;padding:0px"
class="">
<div class=""><a
href="https://www.aliexpress.com/item/26-Pin-D-SUB-DB26-3-Rows-Serial-Parallel-Port-Serial-Shellless-Male-And-Female-Connector/32886738786.html?spm=a2g0s.9042311.0.0.20924c4dg34EEU"
target="_blank" class="" moz-do-not-send="true">https://www.aliexpress.com/item/26-Pin-D-SUB-DB26-3-Rows-Serial-Parallel-Port-Serial-Shellless-Male-And-Female-Connector/32886738786.html?spm=a2g0s.9042311.0.0.20924c4dg34EEU</a></div>
</blockquote>
<div class=""><br
class="">
</div>
<br class="">
<fieldset
class="gmail-m_7428775334725863850gmail-m_-4710357977456663205gmail-m_-7334428458932344159mimeAttachmentHeader"></fieldset>
<br class="">
<fieldset
class="gmail-m_7428775334725863850gmail-m_-4710357977456663205gmail-m_-7334428458932344159mimeAttachmentHeader"></fieldset>
<div class=""><br
class="">
</div>
<br class="">
<fieldset
class="gmail-m_7428775334725863850gmail-m_-4710357977456663205gmail-m_-7334428458932344159mimeAttachmentHeader"></fieldset>
<pre class="gmail-m_7428775334725863850gmail-m_-4710357977456663205gmail-m_-7334428458932344159moz-quote-pre">_______________________________________________
OvmsDev mailing list
<a class="gmail-m_7428775334725863850gmail-m_-4710357977456663205gmail-m_-7334428458932344159moz-txt-link-abbreviated" href="mailto:OvmsDev@lists.openvehicles.com" target="_blank" moz-do-not-send="true">OvmsDev@lists.openvehicles.com</a>
<a class="gmail-m_7428775334725863850gmail-m_-4710357977456663205gmail-m_-7334428458932344159moz-txt-link-freetext" href="http://lists.openvehicles.com/mailman/listinfo/ovmsdev" target="_blank" moz-do-not-send="true">http://lists.openvehicles.com/mailman/listinfo/ovmsdev</a>
</pre>
</blockquote>
<br class="">
<pre class="gmail-m_7428775334725863850gmail-m_-4710357977456663205gmail-m_-7334428458932344159moz-signature" cols="160">--
Michael Balzer * Helkenberger Weg 9 * D-58256 Ennepetal
Fon 02333 / 833 5735 * Handy 0176 / 206 989 26
</pre>
</div>
</blockquote>
<blockquote
type="cite"
class="">
<div dir="ltr"
class=""><span
class="">_______________________________________________</span><br
class="">
<span class="">OvmsDev
mailing list</span><br
class="">
<span class=""><a
href="mailto:OvmsDev@lists.openvehicles.com" target="_blank" class=""
moz-do-not-send="true">OvmsDev@lists.openvehicles.com</a></span><br
class="">
<span class=""><a
href="http://lists.openvehicles.com/mailman/listinfo/ovmsdev"
target="_blank"
class=""
moz-do-not-send="true">http://lists.openvehicles.com/mailman/listinfo/ovmsdev</a></span><br
class="">
</div>
</blockquote>
</div>
_______________________________________________<br class="">
OvmsDev
mailing list<br
class="">
<a
href="mailto:OvmsDev@lists.openvehicles.com"
target="_blank" class="" moz-do-not-send="true">OvmsDev@lists.openvehicles.com</a><br
class="">
<a
href="http://lists.openvehicles.com/mailman/listinfo/ovmsdev"
target="_blank" class="" moz-do-not-send="true">http://lists.openvehicles.com/mailman/listinfo/ovmsdev</a><br
class="">
</div>
</blockquote>
</div>
<br class="">
</div>
</div>
</blockquote>
<blockquote
type="cite" class="">
<div dir="ltr"
class=""><span
class="">_______________________________________________</span><br
class="">
<span class="">OvmsDev
mailing list</span><br
class="">
<span class=""><a
href="mailto:OvmsDev@lists.openvehicles.com" target="_blank" class=""
moz-do-not-send="true">OvmsDev@lists.openvehicles.com</a></span><br
class="">
<span class=""><a
href="http://lists.openvehicles.com/mailman/listinfo/ovmsdev"
target="_blank"
class=""
moz-do-not-send="true">http://lists.openvehicles.com/mailman/listinfo/ovmsdev</a></span><br
class="">
</div>
</blockquote>
</div>
_______________________________________________<br class="">
OvmsDev mailing list<br
class="">
<a
href="mailto:OvmsDev@lists.openvehicles.com"
target="_blank"
class=""
moz-do-not-send="true">OvmsDev@lists.openvehicles.com</a><br
class="">
<a
class="gmail-m_7428775334725863850gmail-m_-4710357977456663205gmail-m_-7334428458932344159moz-txt-link-freetext"
href="http://lists.openvehicles.com/mailman/listinfo/ovmsdev"
target="_blank"
moz-do-not-send="true">http://lists.openvehicles.com/mailman/listinfo/ovmsdev</a><br
class="">
</div>
</blockquote>
</div>
<br class="">
</div>
<br class="">
<fieldset
class="gmail-m_7428775334725863850gmail-m_-4710357977456663205gmail-m_-7334428458932344159mimeAttachmentHeader"></fieldset>
<pre class="gmail-m_7428775334725863850gmail-m_-4710357977456663205gmail-m_-7334428458932344159moz-quote-pre">_______________________________________________
OvmsDev mailing list
<a class="gmail-m_7428775334725863850gmail-m_-4710357977456663205gmail-m_-7334428458932344159moz-txt-link-abbreviated" href="mailto:OvmsDev@lists.openvehicles.com" target="_blank" moz-do-not-send="true">OvmsDev@lists.openvehicles.com</a>
<a class="gmail-m_7428775334725863850gmail-m_-4710357977456663205gmail-m_-7334428458932344159moz-txt-link-freetext" href="http://lists.openvehicles.com/mailman/listinfo/ovmsdev" target="_blank" moz-do-not-send="true">http://lists.openvehicles.com/mailman/listinfo/ovmsdev</a>
</pre>
</blockquote>
<br class="">
<pre class="gmail-m_7428775334725863850gmail-m_-4710357977456663205gmail-m_-7334428458932344159moz-signature" cols="160">--
Michael Balzer * Helkenberger Weg 9 * D-58256 Ennepetal
Fon 02333 / 833 5735 * Handy 0176 / 206 989 26
</pre>
</div>
_______________________________________________<br class="">
OvmsDev mailing list<br class="">
<a
href="mailto:OvmsDev@lists.openvehicles.com"
target="_blank" class=""
moz-do-not-send="true">OvmsDev@lists.openvehicles.com</a><br
class="">
<a
href="http://lists.openvehicles.com/mailman/listinfo/ovmsdev"
rel="noreferrer" target="_blank"
class="" moz-do-not-send="true">http://lists.openvehicles.com/mailman/listinfo/ovmsdev</a><br
class="">
</blockquote>
</div>
<br class="" clear="all">
<div class=""><br class="">
</div>
-- <br class="">
<div dir="ltr"
class="gmail-m_7428775334725863850gmail-m_-4710357977456663205gmail_signature">Üdvözlettel:<br
class="">
Kovács Tamás</div>
<br class="">
<fieldset
class="gmail-m_7428775334725863850gmail-m_-4710357977456663205mimeAttachmentHeader"></fieldset>
<pre class="gmail-m_7428775334725863850gmail-m_-4710357977456663205moz-quote-pre">_______________________________________________
OvmsDev mailing list
<a class="gmail-m_7428775334725863850gmail-m_-4710357977456663205moz-txt-link-abbreviated" href="mailto:OvmsDev@lists.openvehicles.com" target="_blank" moz-do-not-send="true">OvmsDev@lists.openvehicles.com</a>
<a class="gmail-m_7428775334725863850gmail-m_-4710357977456663205moz-txt-link-freetext" href="http://lists.openvehicles.com/mailman/listinfo/ovmsdev" target="_blank" moz-do-not-send="true">http://lists.openvehicles.com/mailman/listinfo/ovmsdev</a>
</pre>
</blockquote>
<br class="">
<pre class="gmail-m_7428775334725863850gmail-m_-4710357977456663205moz-signature" cols="160">--
Michael Balzer * Helkenberger Weg 9 * D-58256 Ennepetal
Fon 02333 / 833 5735 * Handy 0176 / 206 989 26
</pre>
</div>
_______________________________________________<br class="">
OvmsDev mailing list<br class="">
<a
href="mailto:OvmsDev@lists.openvehicles.com"
target="_blank" class=""
moz-do-not-send="true">OvmsDev@lists.openvehicles.com</a><br
class="">
<a
href="http://lists.openvehicles.com/mailman/listinfo/ovmsdev"
rel="noreferrer" target="_blank" class=""
moz-do-not-send="true">http://lists.openvehicles.com/mailman/listinfo/ovmsdev</a><br
class="">
</blockquote>
</div>
<br class="" clear="all">
<div class=""><br class="">
</div>
-- <br class="">
<div dir="ltr"
class="gmail-m_7428775334725863850gmail_signature">Üdvözlettel:<br
class="">
Kovács Tamás</div>
<br class="">
<fieldset
class="gmail-m_7428775334725863850mimeAttachmentHeader"></fieldset>
<pre class="gmail-m_7428775334725863850moz-quote-pre">_______________________________________________
OvmsDev mailing list
<a class="gmail-m_7428775334725863850moz-txt-link-abbreviated" href="mailto:OvmsDev@lists.openvehicles.com" target="_blank" moz-do-not-send="true">OvmsDev@lists.openvehicles.com</a>
<a class="gmail-m_7428775334725863850moz-txt-link-freetext" href="http://lists.openvehicles.com/mailman/listinfo/ovmsdev" target="_blank" moz-do-not-send="true">http://lists.openvehicles.com/mailman/listinfo/ovmsdev</a>
</pre>
</blockquote>
<br class="">
<pre class="gmail-m_7428775334725863850moz-signature" cols="160">--
Michael Balzer * Helkenberger Weg 9 * D-58256 Ennepetal
Fon 02333 / 833 5735 * Handy 0176 / 206 989 26
</pre>
<br class="">
<fieldset
class="gmail-m_7428775334725863850mimeAttachmentHeader"></fieldset>
<pre class="gmail-m_7428775334725863850moz-quote-pre">_______________________________________________
OvmsDev mailing list
<a class="gmail-m_7428775334725863850moz-txt-link-abbreviated" href="mailto:OvmsDev@lists.openvehicles.com" target="_blank" moz-do-not-send="true">OvmsDev@lists.openvehicles.com</a>
<a class="gmail-m_7428775334725863850moz-txt-link-freetext" href="http://lists.openvehicles.com/mailman/listinfo/ovmsdev" target="_blank" moz-do-not-send="true">http://lists.openvehicles.com/mailman/listinfo/ovmsdev</a>
</pre>
</blockquote>
<br class="">
<pre class="gmail-m_7428775334725863850moz-signature" cols="160">--
Michael Balzer * Helkenberger Weg 9 * D-58256 Ennepetal
Fon 02333 / 833 5735 * Handy 0176 / 206 989 26
</pre>
</div>
_______________________________________________<br
class="">
OvmsDev mailing list<br class="">
<a href="mailto:OvmsDev@lists.openvehicles.com"
target="_blank" class="" moz-do-not-send="true">OvmsDev@lists.openvehicles.com</a><br
class="">
<a
href="http://lists.openvehicles.com/mailman/listinfo/ovmsdev"
rel="noreferrer" target="_blank" class=""
moz-do-not-send="true">http://lists.openvehicles.com/mailman/listinfo/ovmsdev</a><br
class="">
</blockquote>
</div>
<br class="" clear="all">
<div class=""><br class="">
</div>
-- <br class="">
<div dir="ltr" class="gmail_signature">Üdvözlettel:<br
class="">
Kovács Tamás</div>
_______________________________________________<br
class="">
OvmsDev mailing list<br class="">
<a href="mailto:OvmsDev@lists.openvehicles.com" class=""
moz-do-not-send="true">OvmsDev@lists.openvehicles.com</a><br
class="">
<a class="moz-txt-link-freetext" href="http://lists.openvehicles.com/mailman/listinfo/ovmsdev">http://lists.openvehicles.com/mailman/listinfo/ovmsdev</a><br
class="">
</div>
</blockquote>
</div>
<br class="">
</div>
<br>
<fieldset class="mimeAttachmentHeader"></fieldset>
<pre class="moz-quote-pre" wrap="">_______________________________________________
OvmsDev mailing list
<a class="moz-txt-link-abbreviated" href="mailto:OvmsDev@lists.openvehicles.com">OvmsDev@lists.openvehicles.com</a>
<a class="moz-txt-link-freetext" href="http://lists.openvehicles.com/mailman/listinfo/ovmsdev">http://lists.openvehicles.com/mailman/listinfo/ovmsdev</a>
</pre>
</blockquote>
<br>
<pre class="moz-signature" cols="160">--
Michael Balzer * Helkenberger Weg 9 * D-58256 Ennepetal
Fon 02333 / 833 5735 * Handy 0176 / 206 989 26
</pre>
</body>
</html>