<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
</head>
<body text="#000000" bgcolor="#FFFFFF">
Be aware the MAX71317 outputs are open drain, so you need a pull up
resistor to e.g. +3.3. According to the data sheet, the current
should stay below 6 mA.<br>
<br>
I've just done a quick test wiring like this:<br>
<br>
<tt>JP1 pin 1 (+3.3) ----- [ 680 Ohms ] ---+--- [ LED ] ----- pin 28
(GND)<br>
|<br>
pin 12 (EGPIO_8)<br>
</tt><br>
Works as expected.<br>
<br>
Regards,<br>
Michael<br>
<br>
<br>
<div class="moz-cite-prefix">Am 19.04.19 um 09:59 schrieb Michael
Balzer:<br>
</div>
<blockquote type="cite"
cite="mid:af7ec43b-bf49-1deb-de4b-69074f76a6ab@expeedo.de">
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
Sure.<br>
<br>
You need to route an EGPIO line to the DA26 port. For a first test
you can add a simple jumper on expansion port pins 10/12 to route
EGPIO_8 to GEP_7 (= pin 21 on DA26).<br>
<br>
You should then be able to use the "egpio" command to test your
LED. EGPIO_1 … _8 labels correspond to MAX7317 ports 2 … 9, so to
control EGPIO_8, do:<br>
<blockquote><tt>OVMS# egpio output 9 1 # EGPIO_8 on</tt><br>
<tt><tt>OVMS# </tt> egpio output 9 0 # EGPIO_8 off</tt><br>
</blockquote>
(correct me if I'm wrong, Mark)<br>
<br>
I wasn't aware there are other cars in need of something like
this. I'll think about adding the logic as an option to the
vehicle framework, but I can send you some patch to test this on
your i-MiEV/clone first.<br>
<br>
Regards,<br>
Michael<br>
<br>
<br>
<div class="moz-cite-prefix">Am 19.04.19 um 09:24 schrieb Tamás
Kovács:<br>
</div>
<blockquote type="cite"
cite="mid:CAGpaXUuD1EG7+voJdem_WCFzb99yog8y7Y6ho-TKPcve4etfDw@mail.gmail.com">
<meta http-equiv="content-type" content="text/html;
charset=UTF-8">
<div dir="ltr">I can add for testing a simple led (with
resistor) , same as SimpleConsole (twizy OVMS V2), to show car
is recuperating, connected to DA26 external expansion port?</div>
<br>
<div class="gmail_quote">
<div dir="ltr" class="gmail_attr">Michael Balzer <<a
href="mailto:dexter@expeedo.de" moz-do-not-send="true">dexter@expeedo.de</a>>
ezt írta (időpont: 2019. ápr. 19., P, 9:17):<br>
</div>
<blockquote class="gmail_quote" style="margin:0px 0px 0px
0.8ex;border-left-width:1px;border-left-style:solid;border-left-color:rgb(204,204,204);padding-left:1ex">
<div bgcolor="#FFFFFF"> As the Mitsubishi code also reads
battery current/power level from CAN, it would be trivial
to add the same logic there.<br>
<br>
<br>
<div class="gmail-m_-4710357977456663205moz-cite-prefix">Am
19.04.19 um 06:52 schrieb Tamás Kovács:<br>
</div>
<blockquote type="cite">
<div dir="ltr">
<div dir="ltr">The Trio (Mitsubishi I-Miev and clones)
does not activate the brake light on recuperation on
2105 and older models, if this is work is very
impressive.</div>
</div>
<br>
<div class="gmail_quote">
<div dir="ltr" class="gmail_attr">Michael Balzer <<a
href="mailto:dexter@expeedo.de" target="_blank"
moz-do-not-send="true">dexter@expeedo.de</a>>
ezt írta (időpont: 2019. ápr. 18., Cs, 23:08):<br>
</div>
<blockquote class="gmail_quote" style="margin:0px 0px
0px
0.8ex;border-left-width:1px;border-left-style:solid;border-left-color:rgb(204,204,204);padding-left:1ex">
<div bgcolor="#FFFFFF"> Mark,<br>
<br>
that looks very good. Not sure about general
demand, but I think we should have this to enable
simple custom hardware I/O extensions.<br>
<br>
For the Twizy, I was thinking about adding logic
to control the brake light from the module. The
Twizy does not activate the brake light on
recuperation, as that's normally (untuned) not
very strong. But a tuned Twizy allows one pedal
driving, so needs this.<br>
<br>
Looking at our case I also think one custom
extension board should fit on top of the modem.<br>
<br>
Regards,<br>
Michael<br>
<br>
<br>
<div
class="gmail-m_-4710357977456663205gmail-m_-7334428458932344159moz-cite-prefix">Am
18.04.19 um 02:36 schrieb Mark Webb-Johnson:<br>
</div>
<blockquote type="cite"> It seems the attachments
were messed up, so attaching again…
<div><br>
</div>
<div>Regards, Mark.</div>
<div><br>
</div>
<br>
<fieldset
class="gmail-m_-4710357977456663205gmail-m_-7334428458932344159mimeAttachmentHeader"></fieldset>
<br>
<fieldset
class="gmail-m_-4710357977456663205gmail-m_-7334428458932344159mimeAttachmentHeader"></fieldset>
<div><br>
<div><br>
<blockquote type="cite">
<div>On 17 Apr 2019, at 10:07 PM, Mark
Webb-Johnson <<a
href="mailto:mark@webb-johnson.net"
target="_blank" moz-do-not-send="true">mark@webb-johnson.net</a>>
wrote:</div>
<br
class="gmail-m_-4710357977456663205gmail-m_-7334428458932344159Apple-interchange-newline">
<div>
<div dir="auto">
<div dir="ltr">
<div>
<blockquote
id="gmail-m_-4710357977456663205gmail-m_-7334428458932344159ntes-pcmail-quote"
style="margin:0px;padding:0px;font-family:微软雅黑"><br>
</blockquote>
<blockquote
id="gmail-m_-4710357977456663205gmail-m_-7334428458932344159ntes-pcmail-quote"
style="margin:0px;padding:0px;font-family:微软雅黑">Design layout. Looks
good to me, but open to
suggestions...</blockquote>
<blockquote
id="gmail-m_-4710357977456663205gmail-m_-7334428458932344159ntes-pcmail-quote"
style="margin:0px;padding:0px;font-family:微软雅黑"><br>
</blockquote>
<blockquote
id="gmail-m_-4710357977456663205gmail-m_-7334428458932344159ntes-pcmail-quote"
style="margin:0px;padding:0px;font-family:微软雅黑">We can make in sets of
three PCBs, to keep prices down.</blockquote>
<blockquote
id="gmail-m_-4710357977456663205gmail-m_-7334428458932344159ntes-pcmail-quote"
style="margin:0px;padding:0px;font-family:微软雅黑"><br>
</blockquote>
<blockquote
id="gmail-m_-4710357977456663205gmail-m_-7334428458932344159ntes-pcmail-quote"
style="margin:0px;padding:0px;font-family:微软雅黑">Regards, Mark<br>
<br>
</blockquote>
</div>
</div>
<div dir="ltr"><br>
On 8 Apr 2019, at 12:05 PM, Mark
Webb-Johnson <<a
href="mailto:mark@webb-johnson.net"
target="_blank"
moz-do-not-send="true">mark@webb-johnson.net</a>>
wrote:<br>
<br>
</div>
<blockquote type="cite">
<div dir="ltr">
<div><br>
</div>
A kit of 5 PCBs + SIP edge
connectors + mounting hardware,
unsoldered, would be about US$15 +
shipping. About US$3/board set.
With shipping I don’t think this
is worth doing with less than 3 or
5 boards per kit.
<div><br>
</div>
<div>Would this be useful?</div>
<div><br>
</div>
<div>Regards, Mark.<br>
<div><br>
<blockquote type="cite">
<div>On 7 Apr 2019, at 9:08
PM, Mark Webb-Johnson <<a
href="mailto:mark@webb-johnson.net" target="_blank"
moz-do-not-send="true">mark@webb-johnson.net</a>>
wrote:</div>
<br
class="gmail-m_-4710357977456663205gmail-m_-7334428458932344159Apple-interchange-newline">
<div>
<div dir="auto">
<div dir="ltr">This is
the closest we have
today:</div>
<div dir="ltr"><br>
</div>
<div dir="ltr"><span
id="gmail-m_-4710357977456663205gmail-m_-7334428458932344159cid:FB5D7C10-7B69-4ECC-98AF-C500BB6C39A3"><image1.jpeg></span></div>
<div dir="ltr"><br>
</div>
<div dir="ltr">That is a
bare modem board, with
just the sip
connectors. The
prototype above is a
K-line transceiver.</div>
<div dir="ltr"><br>
</div>
<div dir="ltr">I think
it would be trivial,
and cheap, to make up
what you show. Perhaps
just solder ready pads
at 0.1” pitch, then
the side sip
connectors wired to
the first row of pads
at each edge. Perhaps
5 PCBs in a kit, with
sip edge connectors,
unsoldered, in a
simple plastic bag.</div>
<div dir="ltr"><br>
</div>
<div dir="ltr">Does that
sound like something
useful? If so, I can
ask the China guys for
some idea of pricing.
If it is just the
unsoldered pcbs +
parts, I don’t think
it will be expensive.</div>
<div dir="ltr"><br>
</div>
<div dir="ltr">Regards,
Mark</div>
<div dir="ltr"><br>
On 7 Apr 2019, at 4:38
PM, Michael Balzer
<<a
href="mailto:dexter@expeedo.de"
target="_blank"
moz-do-not-send="true">dexter@expeedo.de</a>>
wrote:<br>
<br>
</div>
<blockquote type="cite">
<div dir="ltr"> Mark,<br>
<br>
do you know of some
kind of prototyping
board available that
fits to our piggy
back expansion
layout?<br>
<br>
Something like this:
<a
href="https://www.robotshop.com/de/de/cytron-arduino-proto-schild.html"
target="_blank"
moz-do-not-send="true">https://www.robotshop.com/de/de/cytron-arduino-proto-schild.html</a><br>
<br>
Regards,<br>
Michael<br>
<br>
<br>
<div
class="gmail-m_-4710357977456663205gmail-m_-7334428458932344159moz-cite-prefix">Am
03.04.19 um 06:48
schrieb Mark
Webb-Johnson:<br>
</div>
<blockquote
type="cite">
<div><br>
</div>
<div>If you have
work to do on
this DA26
expansion ports,
this is pretty
cool and well
built:</div>
<div><br>
</div>
<blockquote
style="margin:0px
0px 0px
40px;border:none;padding:0px">
<div><a
href="https://www.aliexpress.com/item/26-Pin-D-SUB-DB26-3-Rows-Serial-Parallel-Port-Serial-Shellless-Male-And-Female-Connector/32886738786.html?spm=a2g0s.9042311.0.0.20924c4dg34EEU"
target="_blank" moz-do-not-send="true">https://www.aliexpress.com/item/26-Pin-D-SUB-DB26-3-Rows-Serial-Parallel-Port-Serial-Shellless-Male-And-Female-Connector/32886738786.html?spm=a2g0s.9042311.0.0.20924c4dg34EEU</a></div>
</blockquote>
<div><br>
</div>
<br>
<fieldset
class="gmail-m_-4710357977456663205gmail-m_-7334428458932344159mimeAttachmentHeader"></fieldset>
<br>
<fieldset
class="gmail-m_-4710357977456663205gmail-m_-7334428458932344159mimeAttachmentHeader"></fieldset>
<div><br>
</div>
<br>
<fieldset
class="gmail-m_-4710357977456663205gmail-m_-7334428458932344159mimeAttachmentHeader"></fieldset>
<pre class="gmail-m_-4710357977456663205gmail-m_-7334428458932344159moz-quote-pre">_______________________________________________
OvmsDev mailing list
<a class="gmail-m_-4710357977456663205gmail-m_-7334428458932344159moz-txt-link-abbreviated" href="mailto:OvmsDev@lists.openvehicles.com" target="_blank" moz-do-not-send="true">OvmsDev@lists.openvehicles.com</a>
<a class="gmail-m_-4710357977456663205gmail-m_-7334428458932344159moz-txt-link-freetext" href="http://lists.openvehicles.com/mailman/listinfo/ovmsdev" target="_blank" moz-do-not-send="true">http://lists.openvehicles.com/mailman/listinfo/ovmsdev</a>
</pre>
</blockquote>
<br>
<pre class="gmail-m_-4710357977456663205gmail-m_-7334428458932344159moz-signature" cols="160">--
Michael Balzer * Helkenberger Weg 9 * D-58256 Ennepetal
Fon 02333 / 833 5735 * Handy 0176 / 206 989 26
</pre>
</div>
</blockquote>
<blockquote type="cite">
<div dir="ltr"><span>_______________________________________________</span><br>
<span>OvmsDev
mailing list</span><br>
<span><a
href="mailto:OvmsDev@lists.openvehicles.com"
target="_blank"
moz-do-not-send="true">OvmsDev@lists.openvehicles.com</a></span><br>
<span><a
href="http://lists.openvehicles.com/mailman/listinfo/ovmsdev"
target="_blank"
moz-do-not-send="true">http://lists.openvehicles.com/mailman/listinfo/ovmsdev</a></span><br>
</div>
</blockquote>
</div>
_______________________________________________<br>
OvmsDev mailing list<br>
<a
href="mailto:OvmsDev@lists.openvehicles.com"
target="_blank"
moz-do-not-send="true">OvmsDev@lists.openvehicles.com</a><br>
<a
href="http://lists.openvehicles.com/mailman/listinfo/ovmsdev"
target="_blank"
moz-do-not-send="true">http://lists.openvehicles.com/mailman/listinfo/ovmsdev</a><br>
</div>
</blockquote>
</div>
<br>
</div>
</div>
</blockquote>
<blockquote type="cite">
<div dir="ltr"><span>_______________________________________________</span><br>
<span>OvmsDev mailing list</span><br>
<span><a
href="mailto:OvmsDev@lists.openvehicles.com"
target="_blank"
moz-do-not-send="true">OvmsDev@lists.openvehicles.com</a></span><br>
<span><a
href="http://lists.openvehicles.com/mailman/listinfo/ovmsdev"
target="_blank"
moz-do-not-send="true">http://lists.openvehicles.com/mailman/listinfo/ovmsdev</a></span><br>
</div>
</blockquote>
</div>
_______________________________________________<br>
OvmsDev mailing list<br>
<a
href="mailto:OvmsDev@lists.openvehicles.com"
target="_blank" moz-do-not-send="true">OvmsDev@lists.openvehicles.com</a><br>
<a
class="gmail-m_-4710357977456663205gmail-m_-7334428458932344159moz-txt-link-freetext"
href="http://lists.openvehicles.com/mailman/listinfo/ovmsdev"
target="_blank" moz-do-not-send="true">http://lists.openvehicles.com/mailman/listinfo/ovmsdev</a><br>
</div>
</blockquote>
</div>
<br>
</div>
<br>
<fieldset
class="gmail-m_-4710357977456663205gmail-m_-7334428458932344159mimeAttachmentHeader"></fieldset>
<pre class="gmail-m_-4710357977456663205gmail-m_-7334428458932344159moz-quote-pre">_______________________________________________
OvmsDev mailing list
<a class="gmail-m_-4710357977456663205gmail-m_-7334428458932344159moz-txt-link-abbreviated" href="mailto:OvmsDev@lists.openvehicles.com" target="_blank" moz-do-not-send="true">OvmsDev@lists.openvehicles.com</a>
<a class="gmail-m_-4710357977456663205gmail-m_-7334428458932344159moz-txt-link-freetext" href="http://lists.openvehicles.com/mailman/listinfo/ovmsdev" target="_blank" moz-do-not-send="true">http://lists.openvehicles.com/mailman/listinfo/ovmsdev</a>
</pre>
</blockquote>
<br>
<pre class="gmail-m_-4710357977456663205gmail-m_-7334428458932344159moz-signature" cols="160">--
Michael Balzer * Helkenberger Weg 9 * D-58256 Ennepetal
Fon 02333 / 833 5735 * Handy 0176 / 206 989 26
</pre>
</div>
_______________________________________________<br>
OvmsDev mailing list<br>
<a href="mailto:OvmsDev@lists.openvehicles.com"
target="_blank" moz-do-not-send="true">OvmsDev@lists.openvehicles.com</a><br>
<a
href="http://lists.openvehicles.com/mailman/listinfo/ovmsdev"
rel="noreferrer" target="_blank"
moz-do-not-send="true">http://lists.openvehicles.com/mailman/listinfo/ovmsdev</a><br>
</blockquote>
</div>
<br clear="all">
<div><br>
</div>
-- <br>
<div dir="ltr"
class="gmail-m_-4710357977456663205gmail_signature">Üdvözlettel:<br>
Kovács Tamás</div>
<br>
<fieldset
class="gmail-m_-4710357977456663205mimeAttachmentHeader"></fieldset>
<pre class="gmail-m_-4710357977456663205moz-quote-pre">_______________________________________________
OvmsDev mailing list
<a class="gmail-m_-4710357977456663205moz-txt-link-abbreviated" href="mailto:OvmsDev@lists.openvehicles.com" target="_blank" moz-do-not-send="true">OvmsDev@lists.openvehicles.com</a>
<a class="gmail-m_-4710357977456663205moz-txt-link-freetext" href="http://lists.openvehicles.com/mailman/listinfo/ovmsdev" target="_blank" moz-do-not-send="true">http://lists.openvehicles.com/mailman/listinfo/ovmsdev</a>
</pre>
</blockquote>
<br>
<pre class="gmail-m_-4710357977456663205moz-signature" cols="160">--
Michael Balzer * Helkenberger Weg 9 * D-58256 Ennepetal
Fon 02333 / 833 5735 * Handy 0176 / 206 989 26
</pre>
</div>
_______________________________________________<br>
OvmsDev mailing list<br>
<a href="mailto:OvmsDev@lists.openvehicles.com"
target="_blank" moz-do-not-send="true">OvmsDev@lists.openvehicles.com</a><br>
<a
href="http://lists.openvehicles.com/mailman/listinfo/ovmsdev"
rel="noreferrer" target="_blank" moz-do-not-send="true">http://lists.openvehicles.com/mailman/listinfo/ovmsdev</a><br>
</blockquote>
</div>
<br clear="all">
<div><br>
</div>
-- <br>
<div dir="ltr" class="gmail_signature">Üdvözlettel:<br>
Kovács Tamás</div>
<br>
<fieldset class="mimeAttachmentHeader"></fieldset>
<pre class="moz-quote-pre" wrap="">_______________________________________________
OvmsDev mailing list
<a class="moz-txt-link-abbreviated" href="mailto:OvmsDev@lists.openvehicles.com" moz-do-not-send="true">OvmsDev@lists.openvehicles.com</a>
<a class="moz-txt-link-freetext" href="http://lists.openvehicles.com/mailman/listinfo/ovmsdev" moz-do-not-send="true">http://lists.openvehicles.com/mailman/listinfo/ovmsdev</a>
</pre>
</blockquote>
<br>
<pre class="moz-signature" cols="160">--
Michael Balzer * Helkenberger Weg 9 * D-58256 Ennepetal
Fon 02333 / 833 5735 * Handy 0176 / 206 989 26
</pre>
<br>
<fieldset class="mimeAttachmentHeader"></fieldset>
<pre class="moz-quote-pre" wrap="">_______________________________________________
OvmsDev mailing list
<a class="moz-txt-link-abbreviated" href="mailto:OvmsDev@lists.openvehicles.com">OvmsDev@lists.openvehicles.com</a>
<a class="moz-txt-link-freetext" href="http://lists.openvehicles.com/mailman/listinfo/ovmsdev">http://lists.openvehicles.com/mailman/listinfo/ovmsdev</a>
</pre>
</blockquote>
<br>
<pre class="moz-signature" cols="160">--
Michael Balzer * Helkenberger Weg 9 * D-58256 Ennepetal
Fon 02333 / 833 5735 * Handy 0176 / 206 989 26
</pre>
</body>
</html>