<div dir="ltr">I can add for testing a simple led (with resistor) , same as SimpleConsole (twizy OVMS V2), to show car is recuperating, connected to DA26 external expansion port?</div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">Michael Balzer <<a href="mailto:dexter@expeedo.de">dexter@expeedo.de</a>> ezt írta (időpont: 2019. ápr. 19., P, 9:17):<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left-width:1px;border-left-style:solid;border-left-color:rgb(204,204,204);padding-left:1ex">
  
    
  
  <div bgcolor="#FFFFFF">
    As the Mitsubishi code also reads battery current/power level from
    CAN, it would be trivial to add the same logic there.<br>
    <br>
    <br>
    <div class="gmail-m_-4710357977456663205moz-cite-prefix">Am 19.04.19 um 06:52 schrieb Tamás
      Kovács:<br>
    </div>
    <blockquote type="cite">
      
      <div dir="ltr">
        <div dir="ltr">The Trio (Mitsubishi I-Miev and clones) does not
          activate the brake light on recuperation on 2105 and older
          models, if this is work is very impressive.</div>
      </div>
      <br>
      <div class="gmail_quote">
        <div dir="ltr" class="gmail_attr">Michael Balzer <<a href="mailto:dexter@expeedo.de" target="_blank">dexter@expeedo.de</a>>
          ezt írta (időpont: 2019. ápr. 18., Cs, 23:08):<br>
        </div>
        <blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left-width:1px;border-left-style:solid;border-left-color:rgb(204,204,204);padding-left:1ex">
          <div bgcolor="#FFFFFF"> Mark,<br>
            <br>
            that looks very good. Not sure about general demand, but I
            think we should have this to enable simple custom hardware
            I/O extensions.<br>
            <br>
            For the Twizy, I was thinking about adding logic to control
            the brake light from the module. The Twizy does not activate
            the brake light on recuperation, as that's normally
            (untuned) not very strong. But a tuned Twizy allows one
            pedal driving, so needs this.<br>
            <br>
            Looking at our case I also think one custom extension board
            should fit on top of the modem.<br>
            <br>
            Regards,<br>
            Michael<br>
            <br>
            <br>
            <div class="gmail-m_-4710357977456663205gmail-m_-7334428458932344159moz-cite-prefix">Am
              18.04.19 um 02:36 schrieb Mark Webb-Johnson:<br>
            </div>
            <blockquote type="cite"> It seems the attachments were
              messed up, so attaching again…
              <div><br>
              </div>
              <div>Regards, Mark.</div>
              <div><br>
              </div>
              <br>
              <fieldset class="gmail-m_-4710357977456663205gmail-m_-7334428458932344159mimeAttachmentHeader"></fieldset>
              <br>
              <fieldset class="gmail-m_-4710357977456663205gmail-m_-7334428458932344159mimeAttachmentHeader"></fieldset>
              <div><br>
                <div><br>
                  <blockquote type="cite">
                    <div>On 17 Apr 2019, at 10:07 PM, Mark Webb-Johnson
                      <<a href="mailto:mark@webb-johnson.net" target="_blank">mark@webb-johnson.net</a>>
                      wrote:</div>
                    <br class="gmail-m_-4710357977456663205gmail-m_-7334428458932344159Apple-interchange-newline">
                    <div>
                      <div dir="auto">
                        <div dir="ltr">
                          <div>
                            <blockquote id="gmail-m_-4710357977456663205gmail-m_-7334428458932344159ntes-pcmail-quote" style="margin:0px;padding:0px;font-family:微软雅黑"><br>
                            </blockquote>
                            <blockquote id="gmail-m_-4710357977456663205gmail-m_-7334428458932344159ntes-pcmail-quote" style="margin:0px;padding:0px;font-family:微软雅黑">Design layout. Looks
                              good to me, but open to suggestions...</blockquote>
                            <blockquote id="gmail-m_-4710357977456663205gmail-m_-7334428458932344159ntes-pcmail-quote" style="margin:0px;padding:0px;font-family:微软雅黑"><br>
                            </blockquote>
                            <blockquote id="gmail-m_-4710357977456663205gmail-m_-7334428458932344159ntes-pcmail-quote" style="margin:0px;padding:0px;font-family:微软雅黑">We can make in sets of
                              three PCBs, to keep prices down.</blockquote>
                            <blockquote id="gmail-m_-4710357977456663205gmail-m_-7334428458932344159ntes-pcmail-quote" style="margin:0px;padding:0px;font-family:微软雅黑"><br>
                            </blockquote>
                            <blockquote id="gmail-m_-4710357977456663205gmail-m_-7334428458932344159ntes-pcmail-quote" style="margin:0px;padding:0px;font-family:微软雅黑">Regards, Mark<br>
                              <br>
                            </blockquote>
                          </div>
                        </div>
                        <div dir="ltr"><br>
                          On 8 Apr 2019, at 12:05 PM, Mark Webb-Johnson
                          <<a href="mailto:mark@webb-johnson.net" target="_blank">mark@webb-johnson.net</a>>
                          wrote:<br>
                          <br>
                        </div>
                        <blockquote type="cite">
                          <div dir="ltr">
                            <div><br>
                            </div>
                            A kit of 5 PCBs + SIP edge connectors +
                            mounting hardware, unsoldered, would be
                            about US$15 + shipping. About US$3/board
                            set. With shipping I don’t think this is
                            worth doing with less than 3 or 5 boards per
                            kit.
                            <div><br>
                            </div>
                            <div>Would this be useful?</div>
                            <div><br>
                            </div>
                            <div>Regards, Mark.<br>
                              <div><br>
                                <blockquote type="cite">
                                  <div>On 7 Apr 2019, at 9:08 PM, Mark
                                    Webb-Johnson <<a href="mailto:mark@webb-johnson.net" target="_blank">mark@webb-johnson.net</a>>
                                    wrote:</div>
                                  <br class="gmail-m_-4710357977456663205gmail-m_-7334428458932344159Apple-interchange-newline">
                                  <div>
                                    <div dir="auto">
                                      <div dir="ltr">This is the closest
                                        we have today:</div>
                                      <div dir="ltr"><br>
                                      </div>
                                      <div dir="ltr"><span id="gmail-m_-4710357977456663205gmail-m_-7334428458932344159cid:FB5D7C10-7B69-4ECC-98AF-C500BB6C39A3"><image1.jpeg></span></div>
                                      <div dir="ltr"><br>
                                      </div>
                                      <div dir="ltr">That is a bare
                                        modem board, with just the sip
                                        connectors. The prototype above
                                        is a K-line transceiver.</div>
                                      <div dir="ltr"><br>
                                      </div>
                                      <div dir="ltr">I think it would be
                                        trivial, and cheap, to make up
                                        what you show. Perhaps just
                                        solder ready pads at 0.1” pitch,
                                        then the side sip connectors
                                        wired to the first row of pads
                                        at each edge. Perhaps 5 PCBs in
                                        a kit, with sip edge connectors,
                                        unsoldered, in a simple plastic
                                        bag.</div>
                                      <div dir="ltr"><br>
                                      </div>
                                      <div dir="ltr">Does that sound
                                        like something useful? If so, I
                                        can ask the China guys for some
                                        idea of pricing. If it is just
                                        the unsoldered pcbs + parts, I
                                        don’t think it will be
                                        expensive.</div>
                                      <div dir="ltr"><br>
                                      </div>
                                      <div dir="ltr">Regards, Mark</div>
                                      <div dir="ltr"><br>
                                        On 7 Apr 2019, at 4:38 PM,
                                        Michael Balzer <<a href="mailto:dexter@expeedo.de" target="_blank">dexter@expeedo.de</a>>
                                        wrote:<br>
                                        <br>
                                      </div>
                                      <blockquote type="cite">
                                        <div dir="ltr"> Mark,<br>
                                          <br>
                                          do you know of some kind of
                                          prototyping board available
                                          that fits to our piggy back
                                          expansion layout?<br>
                                          <br>
                                          Something like this: <a href="https://www.robotshop.com/de/de/cytron-arduino-proto-schild.html" target="_blank">https://www.robotshop.com/de/de/cytron-arduino-proto-schild.html</a><br>
                                          <br>
                                          Regards,<br>
                                          Michael<br>
                                          <br>
                                          <br>
                                          <div class="gmail-m_-4710357977456663205gmail-m_-7334428458932344159moz-cite-prefix">Am
                                            03.04.19 um 06:48 schrieb
                                            Mark Webb-Johnson:<br>
                                          </div>
                                          <blockquote type="cite">
                                            <div><br>
                                            </div>
                                            <div>If you have work to do
                                              on this DA26 expansion
                                              ports, this is pretty cool
                                              and well built:</div>
                                            <div><br>
                                            </div>
                                            <blockquote style="margin:0px 0px 0px 40px;border:none;padding:0px">
                                              <div><a href="https://www.aliexpress.com/item/26-Pin-D-SUB-DB26-3-Rows-Serial-Parallel-Port-Serial-Shellless-Male-And-Female-Connector/32886738786.html?spm=a2g0s.9042311.0.0.20924c4dg34EEU" target="_blank">https://www.aliexpress.com/item/26-Pin-D-SUB-DB26-3-Rows-Serial-Parallel-Port-Serial-Shellless-Male-And-Female-Connector/32886738786.html?spm=a2g0s.9042311.0.0.20924c4dg34EEU</a></div>
                                            </blockquote>
                                            <div><br>
                                            </div>
                                            <br>
                                            <fieldset class="gmail-m_-4710357977456663205gmail-m_-7334428458932344159mimeAttachmentHeader"></fieldset>
                                            <br>
                                            <fieldset class="gmail-m_-4710357977456663205gmail-m_-7334428458932344159mimeAttachmentHeader"></fieldset>
                                            <div><br>
                                            </div>
                                            <br>
                                            <fieldset class="gmail-m_-4710357977456663205gmail-m_-7334428458932344159mimeAttachmentHeader"></fieldset>
                                            <pre class="gmail-m_-4710357977456663205gmail-m_-7334428458932344159moz-quote-pre">_______________________________________________
OvmsDev mailing list
<a class="gmail-m_-4710357977456663205gmail-m_-7334428458932344159moz-txt-link-abbreviated" href="mailto:OvmsDev@lists.openvehicles.com" target="_blank">OvmsDev@lists.openvehicles.com</a>
<a class="gmail-m_-4710357977456663205gmail-m_-7334428458932344159moz-txt-link-freetext" href="http://lists.openvehicles.com/mailman/listinfo/ovmsdev" target="_blank">http://lists.openvehicles.com/mailman/listinfo/ovmsdev</a>
</pre>
                                          </blockquote>
                                          <br>
                                          <pre class="gmail-m_-4710357977456663205gmail-m_-7334428458932344159moz-signature" cols="160">-- 
Michael Balzer * Helkenberger Weg 9 * D-58256 Ennepetal
Fon 02333 / 833 5735 * Handy 0176 / 206 989 26
</pre>
                                        </div>
                                      </blockquote>
                                      <blockquote type="cite">
                                        <div dir="ltr"><span>_______________________________________________</span><br>
                                          <span>OvmsDev mailing list</span><br>
                                          <span><a href="mailto:OvmsDev@lists.openvehicles.com" target="_blank">OvmsDev@lists.openvehicles.com</a></span><br>
                                          <span><a href="http://lists.openvehicles.com/mailman/listinfo/ovmsdev" target="_blank">http://lists.openvehicles.com/mailman/listinfo/ovmsdev</a></span><br>
                                        </div>
                                      </blockquote>
                                    </div>
_______________________________________________<br>
                                    OvmsDev mailing list<br>
                                    <a href="mailto:OvmsDev@lists.openvehicles.com" target="_blank">OvmsDev@lists.openvehicles.com</a><br>
                                    <a href="http://lists.openvehicles.com/mailman/listinfo/ovmsdev" target="_blank">http://lists.openvehicles.com/mailman/listinfo/ovmsdev</a><br>
                                  </div>
                                </blockquote>
                              </div>
                              <br>
                            </div>
                          </div>
                        </blockquote>
                        <blockquote type="cite">
                          <div dir="ltr"><span>_______________________________________________</span><br>
                            <span>OvmsDev mailing list</span><br>
                            <span><a href="mailto:OvmsDev@lists.openvehicles.com" target="_blank">OvmsDev@lists.openvehicles.com</a></span><br>
                            <span><a href="http://lists.openvehicles.com/mailman/listinfo/ovmsdev" target="_blank">http://lists.openvehicles.com/mailman/listinfo/ovmsdev</a></span><br>
                          </div>
                        </blockquote>
                      </div>
                      _______________________________________________<br>
                      OvmsDev mailing list<br>
                      <a href="mailto:OvmsDev@lists.openvehicles.com" target="_blank">OvmsDev@lists.openvehicles.com</a><br>
                      <a class="gmail-m_-4710357977456663205gmail-m_-7334428458932344159moz-txt-link-freetext" href="http://lists.openvehicles.com/mailman/listinfo/ovmsdev" target="_blank">http://lists.openvehicles.com/mailman/listinfo/ovmsdev</a><br>
                    </div>
                  </blockquote>
                </div>
                <br>
              </div>
              <br>
              <fieldset class="gmail-m_-4710357977456663205gmail-m_-7334428458932344159mimeAttachmentHeader"></fieldset>
              <pre class="gmail-m_-4710357977456663205gmail-m_-7334428458932344159moz-quote-pre">_______________________________________________
OvmsDev mailing list
<a class="gmail-m_-4710357977456663205gmail-m_-7334428458932344159moz-txt-link-abbreviated" href="mailto:OvmsDev@lists.openvehicles.com" target="_blank">OvmsDev@lists.openvehicles.com</a>
<a class="gmail-m_-4710357977456663205gmail-m_-7334428458932344159moz-txt-link-freetext" href="http://lists.openvehicles.com/mailman/listinfo/ovmsdev" target="_blank">http://lists.openvehicles.com/mailman/listinfo/ovmsdev</a>
</pre>
            </blockquote>
            <br>
            <pre class="gmail-m_-4710357977456663205gmail-m_-7334428458932344159moz-signature" cols="160">-- 
Michael Balzer * Helkenberger Weg 9 * D-58256 Ennepetal
Fon 02333 / 833 5735 * Handy 0176 / 206 989 26
</pre>
          </div>
          _______________________________________________<br>
          OvmsDev mailing list<br>
          <a href="mailto:OvmsDev@lists.openvehicles.com" target="_blank">OvmsDev@lists.openvehicles.com</a><br>
          <a href="http://lists.openvehicles.com/mailman/listinfo/ovmsdev" rel="noreferrer" target="_blank">http://lists.openvehicles.com/mailman/listinfo/ovmsdev</a><br>
        </blockquote>
      </div>
      <br clear="all">
      <div><br>
      </div>
      -- <br>
      <div dir="ltr" class="gmail-m_-4710357977456663205gmail_signature">Üdvözlettel:<br>
        Kovács Tamás</div>
      <br>
      <fieldset class="gmail-m_-4710357977456663205mimeAttachmentHeader"></fieldset>
      <pre class="gmail-m_-4710357977456663205moz-quote-pre">_______________________________________________
OvmsDev mailing list
<a class="gmail-m_-4710357977456663205moz-txt-link-abbreviated" href="mailto:OvmsDev@lists.openvehicles.com" target="_blank">OvmsDev@lists.openvehicles.com</a>
<a class="gmail-m_-4710357977456663205moz-txt-link-freetext" href="http://lists.openvehicles.com/mailman/listinfo/ovmsdev" target="_blank">http://lists.openvehicles.com/mailman/listinfo/ovmsdev</a>
</pre>
    </blockquote>
    <br>
    <pre class="gmail-m_-4710357977456663205moz-signature" cols="160">-- 
Michael Balzer * Helkenberger Weg 9 * D-58256 Ennepetal
Fon 02333 / 833 5735 * Handy 0176 / 206 989 26
</pre>
  </div>

_______________________________________________<br>
OvmsDev mailing list<br>
<a href="mailto:OvmsDev@lists.openvehicles.com" target="_blank">OvmsDev@lists.openvehicles.com</a><br>
<a href="http://lists.openvehicles.com/mailman/listinfo/ovmsdev" rel="noreferrer" target="_blank">http://lists.openvehicles.com/mailman/listinfo/ovmsdev</a><br>
</blockquote></div><br clear="all"><div><br></div>-- <br><div dir="ltr" class="gmail_signature">Üdvözlettel:<br>Kovács Tamás</div>