<div dir="ltr"><div dir="ltr">The Trio (Mitsubishi I-Miev and clones) does not activate the brake light on recuperation on 2105 and older models, if this is work is very impressive.</div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">Michael Balzer <<a href="mailto:dexter@expeedo.de">dexter@expeedo.de</a>> ezt írta (időpont: 2019. ápr. 18., Cs, 23:08):<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left-width:1px;border-left-style:solid;border-left-color:rgb(204,204,204);padding-left:1ex">
<div bgcolor="#FFFFFF">
Mark,<br>
<br>
that looks very good. Not sure about general demand, but I think we
should have this to enable simple custom hardware I/O extensions.<br>
<br>
For the Twizy, I was thinking about adding logic to control the
brake light from the module. The Twizy does not activate the brake
light on recuperation, as that's normally (untuned) not very strong.
But a tuned Twizy allows one pedal driving, so needs this.<br>
<br>
Looking at our case I also think one custom extension board should
fit on top of the modem.<br>
<br>
Regards,<br>
Michael<br>
<br>
<br>
<div class="gmail-m_-7334428458932344159moz-cite-prefix">Am 18.04.19 um 02:36 schrieb Mark
Webb-Johnson:<br>
</div>
<blockquote type="cite">
It seems the attachments were messed up, so attaching again…
<div><br>
</div>
<div>Regards, Mark.</div>
<div><br>
</div>
<br>
<fieldset class="gmail-m_-7334428458932344159mimeAttachmentHeader"></fieldset>
<br>
<fieldset class="gmail-m_-7334428458932344159mimeAttachmentHeader"></fieldset>
<div><br>
<div><br>
<blockquote type="cite">
<div>On 17 Apr 2019, at 10:07 PM, Mark Webb-Johnson
<<a href="mailto:mark@webb-johnson.net" target="_blank">mark@webb-johnson.net</a>>
wrote:</div>
<br class="gmail-m_-7334428458932344159Apple-interchange-newline">
<div>
<div dir="auto">
<div dir="ltr">
<div style="font-family:微软雅黑,Verdana,"Microsoft Yahei",SimSun,sans-serif;font-size:14px;line-height:1.6">
<blockquote id="gmail-m_-7334428458932344159ntes-pcmail-quote" style="margin:0px;padding:0px;font-family:微软雅黑"><br>
</blockquote>
<blockquote id="gmail-m_-7334428458932344159ntes-pcmail-quote" style="margin:0px;padding:0px;font-family:微软雅黑">Design
layout. Looks good to me, but open to
suggestions...</blockquote>
<blockquote id="gmail-m_-7334428458932344159ntes-pcmail-quote" style="margin:0px;padding:0px;font-family:微软雅黑"><br>
</blockquote>
<blockquote id="gmail-m_-7334428458932344159ntes-pcmail-quote" style="margin:0px;padding:0px;font-family:微软雅黑">We
can make in sets of three PCBs, to keep prices
down.</blockquote>
<blockquote id="gmail-m_-7334428458932344159ntes-pcmail-quote" style="margin:0px;padding:0px;font-family:微软雅黑"><br>
</blockquote>
<blockquote id="gmail-m_-7334428458932344159ntes-pcmail-quote" style="margin:0px;padding:0px;font-family:微软雅黑">Regards,
Mark<br>
<br>
</blockquote>
</div>
<u></u><u></u><u></u><u></u></div>
<div dir="ltr"><br>
On 8 Apr 2019, at 12:05 PM, Mark Webb-Johnson <<a href="mailto:mark@webb-johnson.net" target="_blank">mark@webb-johnson.net</a>>
wrote:<br>
<br>
</div>
<blockquote type="cite">
<div dir="ltr">
<div><br>
</div>
A kit of 5 PCBs + SIP edge connectors + mounting
hardware, unsoldered, would be about US$15 +
shipping. About US$3/board set. With shipping I
don’t think this is worth doing with less than 3 or
5 boards per kit.
<div><br>
</div>
<div>Would this be useful?</div>
<div><br>
</div>
<div>Regards, Mark.<br>
<div><br>
<blockquote type="cite">
<div>On 7 Apr 2019, at 9:08 PM, Mark
Webb-Johnson <<a href="mailto:mark@webb-johnson.net" target="_blank">mark@webb-johnson.net</a>>
wrote:</div>
<br class="gmail-m_-7334428458932344159Apple-interchange-newline">
<div>
<div dir="auto">
<div dir="ltr">This is the
closest we have today:</div>
<div dir="ltr"><br>
</div>
<div dir="ltr"><span id="gmail-m_-7334428458932344159cid:FB5D7C10-7B69-4ECC-98AF-C500BB6C39A3"><image1.jpeg></span></div>
<div dir="ltr"><br>
</div>
<div dir="ltr">That is a bare
modem board, with just the sip
connectors. The prototype above is a
K-line transceiver.</div>
<div dir="ltr"><br>
</div>
<div dir="ltr">I think it would
be trivial, and cheap, to make up what
you show. Perhaps just solder ready pads
at 0.1” pitch, then the side sip
connectors wired to the first row of
pads at each edge. Perhaps 5 PCBs in a
kit, with sip edge connectors,
unsoldered, in a simple plastic bag.</div>
<div dir="ltr"><br>
</div>
<div dir="ltr">Does that sound
like something useful? If so, I can ask
the China guys for some idea of pricing.
If it is just the unsoldered pcbs +
parts, I don’t think it will be
expensive.</div>
<div dir="ltr"><br>
</div>
<div dir="ltr">Regards, Mark</div>
<div dir="ltr"><br>
On 7 Apr 2019, at 4:38 PM, Michael
Balzer <<a href="mailto:dexter@expeedo.de" target="_blank">dexter@expeedo.de</a>>
wrote:<br>
<br>
</div>
<blockquote type="cite">
<div dir="ltr">
Mark,<br>
<br>
do you know of some kind of
prototyping board available that fits
to our piggy back expansion layout?<br>
<br>
Something like this: <a href="https://www.robotshop.com/de/de/cytron-arduino-proto-schild.html" target="_blank">https://www.robotshop.com/de/de/cytron-arduino-proto-schild.html</a><br>
<br>
Regards,<br>
Michael<br>
<br>
<br>
<div class="gmail-m_-7334428458932344159moz-cite-prefix">Am
03.04.19 um 06:48 schrieb Mark
Webb-Johnson:<br>
</div>
<blockquote type="cite">
<div><br>
</div>
<div>If you have work to do
on this DA26 expansion ports, this
is pretty cool and well built:</div>
<div><br>
</div>
<blockquote style="margin:0px 0px 0px 40px;border:none;padding:0px">
<div><a href="https://www.aliexpress.com/item/26-Pin-D-SUB-DB26-3-Rows-Serial-Parallel-Port-Serial-Shellless-Male-And-Female-Connector/32886738786.html?spm=a2g0s.9042311.0.0.20924c4dg34EEU" target="_blank">https://www.aliexpress.com/item/26-Pin-D-SUB-DB26-3-Rows-Serial-Parallel-Port-Serial-Shellless-Male-And-Female-Connector/32886738786.html?spm=a2g0s.9042311.0.0.20924c4dg34EEU</a></div>
</blockquote>
<div><br>
</div>
<br>
<fieldset class="gmail-m_-7334428458932344159mimeAttachmentHeader"></fieldset>
<br>
<fieldset class="gmail-m_-7334428458932344159mimeAttachmentHeader"></fieldset>
<div><br>
</div>
<br>
<fieldset class="gmail-m_-7334428458932344159mimeAttachmentHeader"></fieldset>
<pre class="gmail-m_-7334428458932344159moz-quote-pre">_______________________________________________
OvmsDev mailing list
<a class="gmail-m_-7334428458932344159moz-txt-link-abbreviated" href="mailto:OvmsDev@lists.openvehicles.com" target="_blank">OvmsDev@lists.openvehicles.com</a>
<a class="gmail-m_-7334428458932344159moz-txt-link-freetext" href="http://lists.openvehicles.com/mailman/listinfo/ovmsdev" target="_blank">http://lists.openvehicles.com/mailman/listinfo/ovmsdev</a>
</pre>
</blockquote>
<br>
<pre class="gmail-m_-7334428458932344159moz-signature" cols="160">--
Michael Balzer * Helkenberger Weg 9 * D-58256 Ennepetal
Fon 02333 / 833 5735 * Handy 0176 / 206 989 26
</pre>
</div>
</blockquote>
<blockquote type="cite">
<div dir="ltr"><span>_______________________________________________</span><br>
<span>OvmsDev mailing list</span><br>
<span><a href="mailto:OvmsDev@lists.openvehicles.com" target="_blank">OvmsDev@lists.openvehicles.com</a></span><br>
<span><a href="http://lists.openvehicles.com/mailman/listinfo/ovmsdev" target="_blank">http://lists.openvehicles.com/mailman/listinfo/ovmsdev</a></span><br>
</div>
</blockquote>
</div>
_______________________________________________<br>
OvmsDev mailing list<br>
<a href="mailto:OvmsDev@lists.openvehicles.com" target="_blank">OvmsDev@lists.openvehicles.com</a><br>
<a href="http://lists.openvehicles.com/mailman/listinfo/ovmsdev" target="_blank">http://lists.openvehicles.com/mailman/listinfo/ovmsdev</a><br>
</div>
</blockquote>
</div>
<br>
</div>
</div>
</blockquote>
<blockquote type="cite">
<div dir="ltr"><span>_______________________________________________</span><br>
<span>OvmsDev mailing list</span><br>
<span><a href="mailto:OvmsDev@lists.openvehicles.com" target="_blank">OvmsDev@lists.openvehicles.com</a></span><br>
<span><a href="http://lists.openvehicles.com/mailman/listinfo/ovmsdev" target="_blank">http://lists.openvehicles.com/mailman/listinfo/ovmsdev</a></span><br>
</div>
</blockquote>
</div>
_______________________________________________<br>
OvmsDev mailing list<br>
<a href="mailto:OvmsDev@lists.openvehicles.com" target="_blank">OvmsDev@lists.openvehicles.com</a><br>
<a class="gmail-m_-7334428458932344159moz-txt-link-freetext" href="http://lists.openvehicles.com/mailman/listinfo/ovmsdev" target="_blank">http://lists.openvehicles.com/mailman/listinfo/ovmsdev</a><br>
</div>
</blockquote>
</div>
<br>
</div>
<br>
<fieldset class="gmail-m_-7334428458932344159mimeAttachmentHeader"></fieldset>
<pre class="gmail-m_-7334428458932344159moz-quote-pre">_______________________________________________
OvmsDev mailing list
<a class="gmail-m_-7334428458932344159moz-txt-link-abbreviated" href="mailto:OvmsDev@lists.openvehicles.com" target="_blank">OvmsDev@lists.openvehicles.com</a>
<a class="gmail-m_-7334428458932344159moz-txt-link-freetext" href="http://lists.openvehicles.com/mailman/listinfo/ovmsdev" target="_blank">http://lists.openvehicles.com/mailman/listinfo/ovmsdev</a>
</pre>
</blockquote>
<br>
<pre class="gmail-m_-7334428458932344159moz-signature" cols="160">--
Michael Balzer * Helkenberger Weg 9 * D-58256 Ennepetal
Fon 02333 / 833 5735 * Handy 0176 / 206 989 26
</pre>
</div>
_______________________________________________<br>
OvmsDev mailing list<br>
<a href="mailto:OvmsDev@lists.openvehicles.com" target="_blank">OvmsDev@lists.openvehicles.com</a><br>
<a href="http://lists.openvehicles.com/mailman/listinfo/ovmsdev" rel="noreferrer" target="_blank">http://lists.openvehicles.com/mailman/listinfo/ovmsdev</a><br>
</blockquote></div><br clear="all"><div><br></div>-- <br><div dir="ltr" class="gmail_signature">Üdvözlettel:<br>Kovács Tamás</div>