<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
</head>
<body text="#000000" bgcolor="#FFFFFF">
Sure.<br>
<br>
You need to route an EGPIO line to the DA26 port. For a first test
you can add a simple jumper on expansion port pins 10/12 to route
EGPIO_8 to GEP_7 (= pin 21 on DA26).<br>
<br>
You should then be able to use the "egpio" command to test your LED.
EGPIO_1 … _8 labels correspond to MAX7317 ports 2 … 9, so to control
EGPIO_8, do:<br>
<blockquote><tt>OVMS# egpio output 9 1 # EGPIO_8 on</tt><br>
<tt><tt>OVMS# </tt>
egpio output 9 0 # EGPIO_8 off</tt><br>
</blockquote>
(correct me if I'm wrong, Mark)<br>
<br>
I wasn't aware there are other cars in need of something like this.
I'll think about adding the logic as an option to the vehicle
framework, but I can send you some patch to test this on your
i-MiEV/clone first.<br>
<br>
Regards,<br>
Michael<br>
<br>
<br>
<div class="moz-cite-prefix">Am 19.04.19 um 09:24 schrieb Tamás
Kovács:<br>
</div>
<blockquote type="cite"
cite="mid:CAGpaXUuD1EG7+voJdem_WCFzb99yog8y7Y6ho-TKPcve4etfDw@mail.gmail.com">
<meta http-equiv="content-type" content="text/html; charset=UTF-8">
<div dir="ltr">I can add for testing a simple led (with resistor)
, same as SimpleConsole (twizy OVMS V2), to show car is
recuperating, connected to DA26 external expansion port?</div>
<br>
<div class="gmail_quote">
<div dir="ltr" class="gmail_attr">Michael Balzer <<a
href="mailto:dexter@expeedo.de" moz-do-not-send="true">dexter@expeedo.de</a>>
ezt írta (időpont: 2019. ápr. 19., P, 9:17):<br>
</div>
<blockquote class="gmail_quote" style="margin:0px 0px 0px
0.8ex;border-left-width:1px;border-left-style:solid;border-left-color:rgb(204,204,204);padding-left:1ex">
<div bgcolor="#FFFFFF"> As the Mitsubishi code also reads
battery current/power level from CAN, it would be trivial to
add the same logic there.<br>
<br>
<br>
<div class="gmail-m_-4710357977456663205moz-cite-prefix">Am
19.04.19 um 06:52 schrieb Tamás Kovács:<br>
</div>
<blockquote type="cite">
<div dir="ltr">
<div dir="ltr">The Trio (Mitsubishi I-Miev and clones)
does not activate the brake light on recuperation on
2105 and older models, if this is work is very
impressive.</div>
</div>
<br>
<div class="gmail_quote">
<div dir="ltr" class="gmail_attr">Michael Balzer <<a
href="mailto:dexter@expeedo.de" target="_blank"
moz-do-not-send="true">dexter@expeedo.de</a>> ezt
írta (időpont: 2019. ápr. 18., Cs, 23:08):<br>
</div>
<blockquote class="gmail_quote" style="margin:0px 0px
0px
0.8ex;border-left-width:1px;border-left-style:solid;border-left-color:rgb(204,204,204);padding-left:1ex">
<div bgcolor="#FFFFFF"> Mark,<br>
<br>
that looks very good. Not sure about general demand,
but I think we should have this to enable simple
custom hardware I/O extensions.<br>
<br>
For the Twizy, I was thinking about adding logic to
control the brake light from the module. The Twizy
does not activate the brake light on recuperation,
as that's normally (untuned) not very strong. But a
tuned Twizy allows one pedal driving, so needs this.<br>
<br>
Looking at our case I also think one custom
extension board should fit on top of the modem.<br>
<br>
Regards,<br>
Michael<br>
<br>
<br>
<div
class="gmail-m_-4710357977456663205gmail-m_-7334428458932344159moz-cite-prefix">Am
18.04.19 um 02:36 schrieb Mark Webb-Johnson:<br>
</div>
<blockquote type="cite"> It seems the attachments
were messed up, so attaching again…
<div><br>
</div>
<div>Regards, Mark.</div>
<div><br>
</div>
<br>
<fieldset
class="gmail-m_-4710357977456663205gmail-m_-7334428458932344159mimeAttachmentHeader"></fieldset>
<br>
<fieldset
class="gmail-m_-4710357977456663205gmail-m_-7334428458932344159mimeAttachmentHeader"></fieldset>
<div><br>
<div><br>
<blockquote type="cite">
<div>On 17 Apr 2019, at 10:07 PM, Mark
Webb-Johnson <<a
href="mailto:mark@webb-johnson.net"
target="_blank" moz-do-not-send="true">mark@webb-johnson.net</a>>
wrote:</div>
<br
class="gmail-m_-4710357977456663205gmail-m_-7334428458932344159Apple-interchange-newline">
<div>
<div dir="auto">
<div dir="ltr">
<div>
<blockquote
id="gmail-m_-4710357977456663205gmail-m_-7334428458932344159ntes-pcmail-quote"
style="margin:0px;padding:0px;font-family:微软雅黑"><br>
</blockquote>
<blockquote
id="gmail-m_-4710357977456663205gmail-m_-7334428458932344159ntes-pcmail-quote"
style="margin:0px;padding:0px;font-family:微软雅黑">Design layout. Looks
good to me, but open to
suggestions...</blockquote>
<blockquote
id="gmail-m_-4710357977456663205gmail-m_-7334428458932344159ntes-pcmail-quote"
style="margin:0px;padding:0px;font-family:微软雅黑"><br>
</blockquote>
<blockquote
id="gmail-m_-4710357977456663205gmail-m_-7334428458932344159ntes-pcmail-quote"
style="margin:0px;padding:0px;font-family:微软雅黑">We can make in sets of
three PCBs, to keep prices down.</blockquote>
<blockquote
id="gmail-m_-4710357977456663205gmail-m_-7334428458932344159ntes-pcmail-quote"
style="margin:0px;padding:0px;font-family:微软雅黑"><br>
</blockquote>
<blockquote
id="gmail-m_-4710357977456663205gmail-m_-7334428458932344159ntes-pcmail-quote"
style="margin:0px;padding:0px;font-family:微软雅黑">Regards, Mark<br>
<br>
</blockquote>
</div>
</div>
<div dir="ltr"><br>
On 8 Apr 2019, at 12:05 PM, Mark
Webb-Johnson <<a
href="mailto:mark@webb-johnson.net"
target="_blank"
moz-do-not-send="true">mark@webb-johnson.net</a>>
wrote:<br>
<br>
</div>
<blockquote type="cite">
<div dir="ltr">
<div><br>
</div>
A kit of 5 PCBs + SIP edge
connectors + mounting hardware,
unsoldered, would be about US$15 +
shipping. About US$3/board set. With
shipping I don’t think this is worth
doing with less than 3 or 5 boards
per kit.
<div><br>
</div>
<div>Would this be useful?</div>
<div><br>
</div>
<div>Regards, Mark.<br>
<div><br>
<blockquote type="cite">
<div>On 7 Apr 2019, at 9:08
PM, Mark Webb-Johnson <<a
href="mailto:mark@webb-johnson.net" target="_blank"
moz-do-not-send="true">mark@webb-johnson.net</a>>
wrote:</div>
<br
class="gmail-m_-4710357977456663205gmail-m_-7334428458932344159Apple-interchange-newline">
<div>
<div dir="auto">
<div dir="ltr">This is the
closest we have today:</div>
<div dir="ltr"><br>
</div>
<div dir="ltr"><span
id="gmail-m_-4710357977456663205gmail-m_-7334428458932344159cid:FB5D7C10-7B69-4ECC-98AF-C500BB6C39A3"><image1.jpeg></span></div>
<div dir="ltr"><br>
</div>
<div dir="ltr">That is a
bare modem board, with
just the sip connectors.
The prototype above is a
K-line transceiver.</div>
<div dir="ltr"><br>
</div>
<div dir="ltr">I think it
would be trivial, and
cheap, to make up what
you show. Perhaps just
solder ready pads at
0.1” pitch, then the
side sip connectors
wired to the first row
of pads at each edge.
Perhaps 5 PCBs in a kit,
with sip edge
connectors, unsoldered,
in a simple plastic bag.</div>
<div dir="ltr"><br>
</div>
<div dir="ltr">Does that
sound like something
useful? If so, I can ask
the China guys for some
idea of pricing. If it
is just the unsoldered
pcbs + parts, I don’t
think it will be
expensive.</div>
<div dir="ltr"><br>
</div>
<div dir="ltr">Regards,
Mark</div>
<div dir="ltr"><br>
On 7 Apr 2019, at 4:38
PM, Michael Balzer <<a
href="mailto:dexter@expeedo.de" target="_blank" moz-do-not-send="true">dexter@expeedo.de</a>>
wrote:<br>
<br>
</div>
<blockquote type="cite">
<div dir="ltr"> Mark,<br>
<br>
do you know of some
kind of prototyping
board available that
fits to our piggy back
expansion layout?<br>
<br>
Something like this: <a
href="https://www.robotshop.com/de/de/cytron-arduino-proto-schild.html"
target="_blank"
moz-do-not-send="true">https://www.robotshop.com/de/de/cytron-arduino-proto-schild.html</a><br>
<br>
Regards,<br>
Michael<br>
<br>
<br>
<div
class="gmail-m_-4710357977456663205gmail-m_-7334428458932344159moz-cite-prefix">Am
03.04.19 um 06:48
schrieb Mark
Webb-Johnson:<br>
</div>
<blockquote
type="cite">
<div><br>
</div>
<div>If you have
work to do on this
DA26 expansion
ports, this is
pretty cool and
well built:</div>
<div><br>
</div>
<blockquote
style="margin:0px
0px 0px
40px;border:none;padding:0px">
<div><a
href="https://www.aliexpress.com/item/26-Pin-D-SUB-DB26-3-Rows-Serial-Parallel-Port-Serial-Shellless-Male-And-Female-Connector/32886738786.html?spm=a2g0s.9042311.0.0.20924c4dg34EEU"
target="_blank" moz-do-not-send="true">https://www.aliexpress.com/item/26-Pin-D-SUB-DB26-3-Rows-Serial-Parallel-Port-Serial-Shellless-Male-And-Female-Connector/32886738786.html?spm=a2g0s.9042311.0.0.20924c4dg34EEU</a></div>
</blockquote>
<div><br>
</div>
<br>
<fieldset
class="gmail-m_-4710357977456663205gmail-m_-7334428458932344159mimeAttachmentHeader"></fieldset>
<br>
<fieldset
class="gmail-m_-4710357977456663205gmail-m_-7334428458932344159mimeAttachmentHeader"></fieldset>
<div><br>
</div>
<br>
<fieldset
class="gmail-m_-4710357977456663205gmail-m_-7334428458932344159mimeAttachmentHeader"></fieldset>
<pre class="gmail-m_-4710357977456663205gmail-m_-7334428458932344159moz-quote-pre">_______________________________________________
OvmsDev mailing list
<a class="gmail-m_-4710357977456663205gmail-m_-7334428458932344159moz-txt-link-abbreviated" href="mailto:OvmsDev@lists.openvehicles.com" target="_blank" moz-do-not-send="true">OvmsDev@lists.openvehicles.com</a>
<a class="gmail-m_-4710357977456663205gmail-m_-7334428458932344159moz-txt-link-freetext" href="http://lists.openvehicles.com/mailman/listinfo/ovmsdev" target="_blank" moz-do-not-send="true">http://lists.openvehicles.com/mailman/listinfo/ovmsdev</a>
</pre>
</blockquote>
<br>
<pre class="gmail-m_-4710357977456663205gmail-m_-7334428458932344159moz-signature" cols="160">--
Michael Balzer * Helkenberger Weg 9 * D-58256 Ennepetal
Fon 02333 / 833 5735 * Handy 0176 / 206 989 26
</pre>
</div>
</blockquote>
<blockquote type="cite">
<div dir="ltr"><span>_______________________________________________</span><br>
<span>OvmsDev mailing
list</span><br>
<span><a
href="mailto:OvmsDev@lists.openvehicles.com"
target="_blank"
moz-do-not-send="true">OvmsDev@lists.openvehicles.com</a></span><br>
<span><a
href="http://lists.openvehicles.com/mailman/listinfo/ovmsdev"
target="_blank"
moz-do-not-send="true">http://lists.openvehicles.com/mailman/listinfo/ovmsdev</a></span><br>
</div>
</blockquote>
</div>
_______________________________________________<br>
OvmsDev mailing list<br>
<a
href="mailto:OvmsDev@lists.openvehicles.com"
target="_blank"
moz-do-not-send="true">OvmsDev@lists.openvehicles.com</a><br>
<a
href="http://lists.openvehicles.com/mailman/listinfo/ovmsdev"
target="_blank"
moz-do-not-send="true">http://lists.openvehicles.com/mailman/listinfo/ovmsdev</a><br>
</div>
</blockquote>
</div>
<br>
</div>
</div>
</blockquote>
<blockquote type="cite">
<div dir="ltr"><span>_______________________________________________</span><br>
<span>OvmsDev mailing list</span><br>
<span><a
href="mailto:OvmsDev@lists.openvehicles.com"
target="_blank"
moz-do-not-send="true">OvmsDev@lists.openvehicles.com</a></span><br>
<span><a
href="http://lists.openvehicles.com/mailman/listinfo/ovmsdev"
target="_blank"
moz-do-not-send="true">http://lists.openvehicles.com/mailman/listinfo/ovmsdev</a></span><br>
</div>
</blockquote>
</div>
_______________________________________________<br>
OvmsDev mailing list<br>
<a
href="mailto:OvmsDev@lists.openvehicles.com"
target="_blank" moz-do-not-send="true">OvmsDev@lists.openvehicles.com</a><br>
<a
class="gmail-m_-4710357977456663205gmail-m_-7334428458932344159moz-txt-link-freetext"
href="http://lists.openvehicles.com/mailman/listinfo/ovmsdev"
target="_blank" moz-do-not-send="true">http://lists.openvehicles.com/mailman/listinfo/ovmsdev</a><br>
</div>
</blockquote>
</div>
<br>
</div>
<br>
<fieldset
class="gmail-m_-4710357977456663205gmail-m_-7334428458932344159mimeAttachmentHeader"></fieldset>
<pre class="gmail-m_-4710357977456663205gmail-m_-7334428458932344159moz-quote-pre">_______________________________________________
OvmsDev mailing list
<a class="gmail-m_-4710357977456663205gmail-m_-7334428458932344159moz-txt-link-abbreviated" href="mailto:OvmsDev@lists.openvehicles.com" target="_blank" moz-do-not-send="true">OvmsDev@lists.openvehicles.com</a>
<a class="gmail-m_-4710357977456663205gmail-m_-7334428458932344159moz-txt-link-freetext" href="http://lists.openvehicles.com/mailman/listinfo/ovmsdev" target="_blank" moz-do-not-send="true">http://lists.openvehicles.com/mailman/listinfo/ovmsdev</a>
</pre>
</blockquote>
<br>
<pre class="gmail-m_-4710357977456663205gmail-m_-7334428458932344159moz-signature" cols="160">--
Michael Balzer * Helkenberger Weg 9 * D-58256 Ennepetal
Fon 02333 / 833 5735 * Handy 0176 / 206 989 26
</pre>
</div>
_______________________________________________<br>
OvmsDev mailing list<br>
<a href="mailto:OvmsDev@lists.openvehicles.com"
target="_blank" moz-do-not-send="true">OvmsDev@lists.openvehicles.com</a><br>
<a
href="http://lists.openvehicles.com/mailman/listinfo/ovmsdev"
rel="noreferrer" target="_blank"
moz-do-not-send="true">http://lists.openvehicles.com/mailman/listinfo/ovmsdev</a><br>
</blockquote>
</div>
<br clear="all">
<div><br>
</div>
-- <br>
<div dir="ltr"
class="gmail-m_-4710357977456663205gmail_signature">Üdvözlettel:<br>
Kovács Tamás</div>
<br>
<fieldset
class="gmail-m_-4710357977456663205mimeAttachmentHeader"></fieldset>
<pre class="gmail-m_-4710357977456663205moz-quote-pre">_______________________________________________
OvmsDev mailing list
<a class="gmail-m_-4710357977456663205moz-txt-link-abbreviated" href="mailto:OvmsDev@lists.openvehicles.com" target="_blank" moz-do-not-send="true">OvmsDev@lists.openvehicles.com</a>
<a class="gmail-m_-4710357977456663205moz-txt-link-freetext" href="http://lists.openvehicles.com/mailman/listinfo/ovmsdev" target="_blank" moz-do-not-send="true">http://lists.openvehicles.com/mailman/listinfo/ovmsdev</a>
</pre>
</blockquote>
<br>
<pre class="gmail-m_-4710357977456663205moz-signature" cols="160">--
Michael Balzer * Helkenberger Weg 9 * D-58256 Ennepetal
Fon 02333 / 833 5735 * Handy 0176 / 206 989 26
</pre>
</div>
_______________________________________________<br>
OvmsDev mailing list<br>
<a href="mailto:OvmsDev@lists.openvehicles.com"
target="_blank" moz-do-not-send="true">OvmsDev@lists.openvehicles.com</a><br>
<a
href="http://lists.openvehicles.com/mailman/listinfo/ovmsdev"
rel="noreferrer" target="_blank" moz-do-not-send="true">http://lists.openvehicles.com/mailman/listinfo/ovmsdev</a><br>
</blockquote>
</div>
<br clear="all">
<div><br>
</div>
-- <br>
<div dir="ltr" class="gmail_signature">Üdvözlettel:<br>
Kovács Tamás</div>
<br>
<fieldset class="mimeAttachmentHeader"></fieldset>
<pre class="moz-quote-pre" wrap="">_______________________________________________
OvmsDev mailing list
<a class="moz-txt-link-abbreviated" href="mailto:OvmsDev@lists.openvehicles.com">OvmsDev@lists.openvehicles.com</a>
<a class="moz-txt-link-freetext" href="http://lists.openvehicles.com/mailman/listinfo/ovmsdev">http://lists.openvehicles.com/mailman/listinfo/ovmsdev</a>
</pre>
</blockquote>
<br>
<pre class="moz-signature" cols="160">--
Michael Balzer * Helkenberger Weg 9 * D-58256 Ennepetal
Fon 02333 / 833 5735 * Handy 0176 / 206 989 26
</pre>
</body>
</html>