<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
</head>
<body text="#000000" bgcolor="#FFFFFF">
Hi Mark,<br>
<br>
Yeah, big shrug here too. It occurs infrequently, during what was a
reboot anyway, and the system recovered itself, so this isn't a
critical issue unless it keeps happening (i.e. a crash/reboot
loop). I suppose it could also occur with a frame coming in from a
HUD, though that CAN bus is on a different interface chip so if the
cause is hardware dependent, it might not occur.<br>
<br>
Perhaps we need to not launch the higher level applications (e.g.
OBD2ECU) until maybe the 5 second mark, when we know the system is
initialized and otherwise pretty stable, but within that "Early"
timeframe? Just a thought,<br>
<br>
Greg<br>
<br>
<br>
<div class="moz-cite-prefix">Mark Webb-Johnson wrote:<br>
</div>
<blockquote type="cite"
cite="mid:B296C17D-71F0-4486-B59A-065AA23690FB@webb-johnson.net">
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
Greg,
<div class=""><br class="">
</div>
<div class="">Yes, the MyCan.RegisterListener(m_rxqueue) will
register for all messages on all CAN buses.</div>
<div class=""><br class="">
</div>
<div class="">I am trying to work out a neat way of adding filters
to this (both hardware and software). Some easy standard way of
filtering traffic in a standard way (like the BFP filters in
Unix variants do for ethernet traffic). That will give us a
performance boost for things like odb2ecu, retools, etc.</div>
<div class=""><br class="">
</div>
<div class="">But you already have a "if (frame.origin ==
me->m_can)”, so not sure how this could be affecting you?</div>
<div class=""><br class="">
</div>
<div class="">
<blockquote type="cite" class="">What precisely is "early" in
the context of a boot crash? That would put a bound on the
size and location of the timing window.</blockquote>
</div>
<div class=""><br class="">
</div>
<div class="">10 seconds, I believe. You can see it with the
message "I (10576) housekeeping: System considered stable (RAM:
8b=99060-99176 32b=20)” about 10 seconds into the boot.</div>
<div class=""><br class="">
</div>
<div class="">Regards, Mark.<br class="">
<div><br class="">
<blockquote type="cite" class="">
<div class="">On 23 May 2018, at 7:55 AM, Greg D. <<a
href="mailto:gregd2350@gmail.com" class=""
moz-do-not-send="true">gregd2350@gmail.com</a>>
wrote:</div>
<br class="Apple-interchange-newline">
<div class="">
<meta http-equiv="Content-Type" content="text/html;
charset=UTF-8" class="">
<div text="#000000" bgcolor="#FFFFFF" class=""> Hi
Michael,<br class="">
<br class="">
Correct, not a config issue. I had assumed it was a
race condition (first time I've seen it), but didn't
realize it involved my code. Yikes!<br class="">
<br class="">
This is the call-back into the OBD2ECU task when a CAN
frame is received in the system. Apparently everyone
looking for a CAN frame gets called when a frame is
received from any bus, and each process needs to filter
out the ones they own. So, somehow a CAN frame was seen
to have been received before the system was fully
initialized. Perhaps something dropped into the
hardware buffer after the chip was turned on, but not
before the O/S had gotten everything situated for
handling it. I don't currently have anything connected
to the OBDII CAN bus (CAN3) on my module, so this must
have been a frame from the car itself on CAN 1. CAN 2
is not used in my car.<br class="">
<br class="">
What precisely is "early" in the context of a boot
crash? That would put a bound on the size and location
of the timing window.<br class="">
<br class="">
Greg<br class="">
<br class="">
<br class="">
<div class="moz-cite-prefix">Michael Balzer wrote:<br
class="">
</div>
<blockquote type="cite"
cite="mid:6a8db28c-03ba-2952-d802-d720e6dd2deb@expeedo.de"
class="">
<meta http-equiv="Content-Type" content="text/html;
charset=UTF-8" class="">
Greg,<br class="">
<br class="">
the backtrace says the crash happened here:<br
class="">
<br class="">
<tt class="">0x4008f6de is in vTaskEnterCritical
(/Users/mark/esp/esp-idf/components/freertos/include/freertos/portmacro.h:283).<br
class="">
278 * Warning: From the ISA docs: in some
(unspecified) cases, the s32c1i instruction may
return the<br class="">
279 * *bitwise inverse* of the old mem if the
mem wasn't written. This doesn't seem to happen on
the<br class="">
280 * ESP32 (portMUX assertions would fail).<br
class="">
281 */<br class="">
282 static inline void uxPortCompareSet(volatile
uint32_t *addr, uint32_t compare, uint32_t *set) {<br
class="">
283 __asm__ __volatile__ (<br class="">
284 "WSR %2,SCOMPARE1 \n"<br
class="">
285 "S32C1I %0, %1, 0 \n"<br
class="">
286 :"=r"(*set)<br class="">
287 :"r"(addr), "r"(compare), "0"(*set)<br
class="">
0x4008eb10 is in xQueueGenericReceive
(/Users/mark/esp/esp-idf/components/freertos/./queue.c:1455).<br
class="">
1450 statements within the function itself.
This is done in the interest<br class="">
1451 of execution time efficiency. */<br
class="">
1452 <br class="">
1453 for( ;; )<br class="">
1454 {<br class="">
1455
taskENTER_CRITICAL(&pxQueue->mux);<br
class="">
1456 {<br class="">
1457 /* Is there data in the queue
now? To be running the calling task<br class="">
1458 must be the highest priority
task wanting to access the queue. */<br class="">
1459 if(
pxQueue->uxMessagesWaiting > ( UBaseType_t ) 0
)<br class="">
<b class="">0x4011f3fd is in OBD2ECU_task(void*)
(/Users/mark/Documents/ovms/Open-Vehicle-Monitoring-System-3/vehicle/OVMS.V3/components/obd2ecu/src/obd2ecu.cpp:155).</b></tt><tt
class=""><br class="">
</tt><tt class="">150 obd2ecu *me =
(obd2ecu*)pvParameters;</tt><tt class=""><br
class="">
</tt><tt class="">151 </tt><tt class=""><br
class="">
</tt><tt class="">152 CAN_frame_t frame;</tt><tt
class=""><br class="">
</tt><tt class="">153 while(1)</tt><tt class=""><br
class="">
</tt><tt class="">154 {</tt><tt class=""><br
class="">
</tt><b class=""><tt class="">155 if
(xQueueReceive(me->m_rxqueue, &frame,
(portTickType)portMAX_DELAY)==pdTRUE)</tt></b><tt
class=""><br class="">
</tt><tt class="">156 {</tt><tt class=""><br
class="">
</tt><tt class="">157 // Only handle incoming
frames on our CAN bus</tt><tt class=""><br class="">
</tt><tt class="">158 if (frame.origin ==
me->m_can) me->IncomingFrame(&frame);</tt><tt
class=""><br class="">
</tt><tt class="">159 }</tt><tt class=""><br
class="">
</tt><br class="">
<br class="">
So I assume that's the same bug I already reported in
issue #103:<br class="">
<br class="">
<a class="moz-txt-link-freetext"
href="https://github.com/openvehicles/Open-Vehicle-Monitoring-System-3/issues/103"
moz-do-not-send="true">https://github.com/openvehicles/Open-Vehicle-Monitoring-System-3/issues/103</a><br
class="">
<br class="">
…and as it now happened to you, I assume it's not
configuration related. Can you verify my assumption?<br
class="">
<br class="">
<blockquote type="cite" class="">Looks like an init
race condition, i.e. m_rxqueue used in undefined
state.</blockquote>
<br class="">
Regards,<br class="">
Michael<br class="">
<br class="">
<br class="">
<br class="">
<div class="moz-cite-prefix">Am 22.05.2018 um 19:24
schrieb Greg D.:<br class="">
</div>
<blockquote type="cite"
cite="mid:45c73f38-dcea-9bac-7b5a-bedc8e08617d@gmail.com"
class="">
<pre class="" wrap="">Just noticed this on my production 3.1 module. Was this an artifact of the
upgrade from .005 to .006?
Last boot was 140983 second(s) ago
Time at boot: 2018-05-20 19:05:59 PDT
This is reset #17 since last power cycle
Detected boot reason: EarlyCrash (12/12)
Crash counters: 1 total, 1 early
Last crash: StoreProhibited exception on core 1
Registers:
PC : 0x4008f6de PS : 0x00060033 A0 : 0x8008eb13 A1 : 0x3ffd6150
A2 : 0xfefeff4e A3 : 0x0000abab A4 : 0xb33fffff A5 : 0x00000001
A6 : 0x00060020 A7 : 0x0000cdcd A8 : 0x0000abab A9 : 0x3ffd6150
A10 : 0x00000003 A11 : 0x00060023 A12 : 0x00060020 A13 : 0x3ffb4188
A14 : 0x000001e8 A15 : 0x00001800 SAR : 0x00000000 EXCCAUSE: 0x0000001d
EXCVADDR: 0xfefeff4e LBEG : 0x00000000 LEND : 0x00000000 LCOUNT : 0x00000000
Backtrace:
0x4008f6de 0x4008eb10 0x4011f3fd 0x40174f95 0x400e73be 0x400e4699 0x40085149
0x40128bc2 0x40128df7 0x401287b4 0x400ea22d 0x400eac7a 0x400ead09 0x400ead19
0x402207d6 0x400e9ece 0x400e9f79 0x400e45f5 0x400e4604 0x400f5c09 0x400f035d
Version: 3.1.006/ota_0/main (build idf v3.1-dev-455-gf4905cdf May 20 2018 20:08:31)
--------------------------------------------------------------------------------
Running partition: ota_0
Boot partition: ota_0
Firmware: 3.1.006/ota_0/main (build idf v3.1-dev-455-gf4905cdf May 20 2018 20:08:31)
</pre>
<!--'"--><br class="">
<fieldset class="mimeAttachmentHeader"></fieldset>
<br class="">
<pre class="" wrap="">_______________________________________________
OvmsDev mailing list
<a class="moz-txt-link-abbreviated" href="mailto:OvmsDev@lists.openvehicles.com" moz-do-not-send="true">OvmsDev@lists.openvehicles.com</a>
<a class="moz-txt-link-freetext" href="http://lists.openvehicles.com/mailman/listinfo/ovmsdev" moz-do-not-send="true">http://lists.openvehicles.com/mailman/listinfo/ovmsdev</a>
</pre>
</blockquote>
<br class="">
<pre class="moz-signature" cols="160">--
Michael Balzer * Helkenberger Weg 9 * D-58256 Ennepetal
Fon 02333 / 833 5735 * Handy 0176 / 206 989 26
</pre>
<br class="">
<fieldset class="mimeAttachmentHeader"></fieldset>
<br class="">
<pre class="" wrap="">_______________________________________________
OvmsDev mailing list
<a class="moz-txt-link-abbreviated" href="mailto:OvmsDev@lists.openvehicles.com" moz-do-not-send="true">OvmsDev@lists.openvehicles.com</a>
<a class="moz-txt-link-freetext" href="http://lists.openvehicles.com/mailman/listinfo/ovmsdev" moz-do-not-send="true">http://lists.openvehicles.com/mailman/listinfo/ovmsdev</a>
</pre>
</blockquote>
<br class="">
</div>
_______________________________________________<br
class="">
OvmsDev mailing list<br class="">
<a href="mailto:OvmsDev@lists.openvehicles.com" class=""
moz-do-not-send="true">OvmsDev@lists.openvehicles.com</a><br
class="">
<a class="moz-txt-link-freetext" href="http://lists.openvehicles.com/mailman/listinfo/ovmsdev">http://lists.openvehicles.com/mailman/listinfo/ovmsdev</a><br
class="">
</div>
</blockquote>
</div>
<br class="">
</div>
<br>
<fieldset class="mimeAttachmentHeader"></fieldset>
<br>
<pre wrap="">_______________________________________________
OvmsDev mailing list
<a class="moz-txt-link-abbreviated" href="mailto:OvmsDev@lists.openvehicles.com">OvmsDev@lists.openvehicles.com</a>
<a class="moz-txt-link-freetext" href="http://lists.openvehicles.com/mailman/listinfo/ovmsdev">http://lists.openvehicles.com/mailman/listinfo/ovmsdev</a>
</pre>
</blockquote>
<br>
</body>
</html>