<html>
<head>
<meta http-equiv="Content-Type" content="text/html;
charset=ISO-8859-1">
</head>
<body text="#000000" bgcolor="#FFFFFF">
Hi Michael,<br>
<br>
Fair question. Pretty sure I got it right. The proto box was a lot
trickier, but on both units I engaged the SD with the spring and
pushed it into position where it clicked into place. Another push
and it unlatched and came out. Certainly felt right.<br>
<br>
Presume the contacts side of the SD face the bottom of the case,
away from the USB connector, right? I didn't try it upside down.<br>
<br>
Greg<br>
<br>
<br>
<div class="moz-cite-prefix">Michael Balzer wrote:<br>
</div>
<blockquote type="cite"
cite="mid:bc8a8abd-f284-8d2e-03b8-9c9c9d0f16d6@expeedo.de">
<meta http-equiv="Content-Type" content="text/html;
charset=ISO-8859-1">
Greg,<br>
<br>
as that's the first time, are you sure you inserted the SD
correctly? With a closed case you need a screw driver or similar
to get it in. The slot has a spring latch you can feel and hear.<br>
<br>
Regards,<br>
Michael<br>
<br>
<br>
<div class="moz-cite-prefix">Am 18.05.2018 um 01:56 schrieb Greg
D.:<br>
</div>
<blockquote type="cite"
cite="mid:20ad8005-2d08-7215-ceae-5b725a71e586@gmail.com">
<meta http-equiv="Content-Type" content="text/html;
charset=ISO-8859-1">
Thanks, Michael, I'd missed that. So, that explains the reboot
status, but not why the SD card isn't seen.<br>
<br>
fdisk -l on my Linux system claims that the SD card is formatted
FAT32, and it mounts / umounts just fine there. The SD card is
basically new / empty, other than a few directories auto-created
when it was once inserted into a cell phone. fsck.fat -v is
clean. So, I'm puzzled what's preventing it from being seen. A
fresh build from this morning on my v3.0 proto module acts the
same (minus the reboot). <br>
<br>
Greg<br>
<br>
<br>
<div class="moz-cite-prefix">Michael Balzer wrote:<br>
</div>
<blockquote type="cite"
cite="mid:f9ed196e-43ac-49f3-7986-52dccb27555d@expeedo.de">
<meta http-equiv="Content-Type" content="text/html;
charset=ISO-8859-1">
Greg,<br>
<br>
1. See <a class="moz-txt-link-freetext"
href="https://github.com/openvehicles/Open-Vehicle-Monitoring-System-3/issues/111"
moz-do-not-send="true">https://github.com/openvehicles/Open-Vehicle-Monitoring-System-3/issues/111</a>
-- TL;DR: you should update to an "edge" build or build
yourself.<br>
<br>
2. You need to format the SD card with FAT32, also users
reported the MacOS FAT32 format would not be accepted by the
module (I can't test that, all Linux formatted cards work).
There are some issues with the FAT implementation in esp-idf,
i.e. with reading damaged partitions.<br>
<br>
Regards,<br>
Michael<br>
<br>
<br>
<div class="moz-cite-prefix">Am 17.05.2018 um 22:49 schrieb
Greg D.:<br>
</div>
<blockquote type="cite"
cite="mid:51269aa9-0806-3d0d-d10b-8f44ba09d5e3@gmail.com">
<meta http-equiv="Content-Type" content="text/html;
charset=ISO-8859-1">
Greg D. wrote:<br>
<blockquote type="cite"
cite="mid:5d427bac-f864-2913-98d3-229cdf1dbb48@gmail.com">I'll
pick up the logging tomorrow, and provide that</blockquote>
<br>
{sigh}<br>
<br>
I went to the car to grab a verbose log, and started poking
around for the commands, etc. Looked at the network status,
and see that ppp has an IP address! What? Boot status
showed:<br>
<blockquote><tt>OVMS# boot status</tt><tt><br>
</tt><tt> Last boot was 249 second(s) ago</tt><tt><br>
</tt><tt> This is reset #15 since last power cycle</tt><tt><br>
</tt><tt> Detected boot reason: FirmwareUpdate</tt><tt><br>
</tt><tt> Crash counters: 0 total, 0 early</tt><tt><br>
</tt><tt> CPU#0 boot reason was 12</tt><tt><br>
</tt><tt> CPU#1 boot reason was 12</tt><tt><br>
</tt><tt> OVMS# </tt><tt><br>
</tt><tt> OVMS# metric list m.version</tt><tt><br>
</tt><tt> m.version
3.1.005/ota_1/main (build idf v3.1-dev-454-gdaef4b5c
May 1 2018 21:38:50)</tt><tt><br>
</tt><tt> OVMS# </tt><br>
</blockquote>
...which is bogus, since if it really upgraded the firmware
it should be on .006. Also, the OTA time is set to the
default 2am, which is clearly not the current time in any
relevant timezone.<br>
<br>
I had tried to insert an SD card for easier log portability,
but for some reason it wasn't seen. 'sd status' says no SD
card has been inserted, and sd mount fails. There IS an
active USB connection (being used for a serial console
monitor), so our friendly cp2102 issue shouldn't be at play,
and there is no firmware file present on the SD either, but
the timing of the reboot is about right for when the SD was
inserted. It's a SanDisk 16gb Ultra Plus microsd... No
luck with it either on my 3.0 proto module, but it reads
fine on my PC. This is my first time trying to use a
microSD card with the OVMS module, so I don't know what to
expect. Could be user error on my part?<br>
<br>
Did the act of jiggling the module and inserting the SD card
cause a reboot, the reason for which was not logged (i.e. is
the 'firmware upgrade' status leftover from the .004 ->
.005 upgrade some weeks ago)?<br>
<br>
{shrug}<br>
<br>
Anyway, bottom line are three issues:<br>
<br>
1. What caused my module to reboot with an apparently
bogus "upgrade"?<br>
2. Why can't either of my modules see this SD card?<br>
3. I will need to wait for the loss of modem connectivity
to reproduce, since the reboot "fixed" it... Sorry.<br>
<br>
Greg<br>
<br>
<br>
<fieldset class="mimeAttachmentHeader"></fieldset>
<br>
<pre wrap="">_______________________________________________
OvmsDev mailing list
<a class="moz-txt-link-abbreviated" href="mailto:OvmsDev@lists.openvehicles.com" moz-do-not-send="true">OvmsDev@lists.openvehicles.com</a>
<a class="moz-txt-link-freetext" href="http://lists.openvehicles.com/mailman/listinfo/ovmsdev" moz-do-not-send="true">http://lists.openvehicles.com/mailman/listinfo/ovmsdev</a>
</pre>
</blockquote>
<br>
<pre class="moz-signature" cols="160">--
Michael Balzer * Helkenberger Weg 9 * D-58256 Ennepetal
Fon 02333 / 833 5735 * Handy 0176 / 206 989 26
</pre>
<br>
<fieldset class="mimeAttachmentHeader"></fieldset>
<br>
<pre wrap="">_______________________________________________
OvmsDev mailing list
<a class="moz-txt-link-abbreviated" href="mailto:OvmsDev@lists.openvehicles.com" moz-do-not-send="true">OvmsDev@lists.openvehicles.com</a>
<a class="moz-txt-link-freetext" href="http://lists.openvehicles.com/mailman/listinfo/ovmsdev" moz-do-not-send="true">http://lists.openvehicles.com/mailman/listinfo/ovmsdev</a>
</pre>
</blockquote>
<br>
<br>
<fieldset class="mimeAttachmentHeader"></fieldset>
<br>
<pre wrap="">_______________________________________________
OvmsDev mailing list
<a class="moz-txt-link-abbreviated" href="mailto:OvmsDev@lists.openvehicles.com" moz-do-not-send="true">OvmsDev@lists.openvehicles.com</a>
<a class="moz-txt-link-freetext" href="http://lists.openvehicles.com/mailman/listinfo/ovmsdev" moz-do-not-send="true">http://lists.openvehicles.com/mailman/listinfo/ovmsdev</a>
</pre>
</blockquote>
<br>
<pre class="moz-signature" cols="160">--
Michael Balzer * Helkenberger Weg 9 * D-58256 Ennepetal
Fon 02333 / 833 5735 * Handy 0176 / 206 989 26
</pre>
<br>
<fieldset class="mimeAttachmentHeader"></fieldset>
<br>
<pre wrap="">_______________________________________________
OvmsDev mailing list
<a class="moz-txt-link-abbreviated" href="mailto:OvmsDev@lists.openvehicles.com">OvmsDev@lists.openvehicles.com</a>
<a class="moz-txt-link-freetext" href="http://lists.openvehicles.com/mailman/listinfo/ovmsdev">http://lists.openvehicles.com/mailman/listinfo/ovmsdev</a>
</pre>
</blockquote>
<br>
</body>
</html>