<html>
<head>
<meta http-equiv="Content-Type" content="text/html;
charset=windows-1252">
</head>
<body text="#000000" bgcolor="#FFFFFF">
Have you tried exchanging the OBD cable? I.e. using the one from
your v2 module?<br>
<br>
<br>
<div class="moz-cite-prefix">Am 19.03.2018 um 15:45 schrieb Julien
“JaXX” Banchet:<br>
</div>
<blockquote type="cite"
cite="mid:0b1831cf-44b4-4a7e-9f6f-f6bbe25d0788@Spark">
<title></title>
<div name="messageBodySection" style="font-size: 14px;
font-family: -apple-system, BlinkMacSystemFont, sans-serif;">
<div>Tried the v3 alone on the bus (leaving module RT, will try
‘none' later on Marks suggestion)</div>
<div><br>
</div>
<div>Plugged, waited a minute, then put the contact.</div>
It didn’t go very well, I hopefully didn’t burst into flames
neither :)
<div><br>
</div>
<div><a href="https://photos.app.goo.gl/rlkUmowR28AAp8Nf2"
moz-do-not-send="true">https://photos.app.goo.gl/rlkUmowR28AAp8Nf2</a><br>
</div>
<div><br>
</div>
<div>JB./.</div>
<div><br>
</div>
<div><br>
</div>
</div>
<div name="messageReplySection" style="font-size: 14px;
font-family: -apple-system, BlinkMacSystemFont, sans-serif;"><br>
On 19 Mar 2018 at 14:22 +0100, Michael Balzer
<a class="moz-txt-link-rfc2396E" href="mailto:dexter@expeedo.de"><dexter@expeedo.de></a>, wrote:<br>
<blockquote type="cite" style="margin: 5px 5px; padding-left:
10px; border-left: thin solid #1abc9c;">
<div class="moz-cite-prefix">The RT module sets the Twizy CAN
speed, no need to configure that.<br>
<br>
I'm pretty sure it's been caused by the v2 hooked to the bus
parallel to the v3. Maybe that can work if you only allow
one of them to write to the bus.<br>
<br>
Btw, Arduino CAN shields often need some jumper for
termination.<br>
<br>
Regards,<br>
Michael<br>
<br>
<br>
Am 19.03.2018 um 14:01 schrieb Julien “JaXX” Banchet:<br>
</div>
<blockquote type="cite"
cite="mid:4628ce5d-8c4e-43ff-a046-9135096e8897@Spark"
style="margin: 5px 5px; padding-left: 10px; border-left:
thin solid #e67e22;">
<div name="messageBodySection" style="font-size: 14px;
font-family: -apple-system, BlinkMacSystemFont,
sans-serif;">Oh!? A wrong CAN speed ? Haven’t though of
that.
<div><br>
</div>
<div>I have RT set, but I do’t know how to look up the
speed which is set (besides the defaulted
CONFIG_CAN_SPEED_100KBPS=y in sdkconfig, though I
suppose the module sets the right speed, right ?)</div>
<div><br>
</div>
<div>JB./.</div>
</div>
<div name="messageReplySection" style="font-size: 14px;
font-family: -apple-system, BlinkMacSystemFont,
sans-serif;"><br>
On 19 Mar 2018 at 13:39 +0100, Mark Webb-Johnson <a
class="moz-txt-link-rfc2396E"
href="mailto:mark@webb-johnson.net"
moz-do-not-send="true"><mark@webb-johnson.net></a>,
wrote:<br>
<blockquote type="cite" style="margin: 5px 5px;
padding-left: 10px; border-left: thin solid #3498db;">Do
you have a vehicle module defined, with a can bus
active?
<div class=""><br class="">
</div>
<div class="">I had a similar thing when I was set to
1Mbps (it should have been 500Kbps).</div>
<div class=""><br class="">
</div>
<div class="">Regards, Mark.</div>
<div class=""><br class="">
<div>
<blockquote type="cite" class="" style="margin: 5px
5px; padding-left: 10px; border-left: thin solid
#d35400;">
<div class="">On 19 Mar 2018, at 7:46 PM, Julien
“JaXX” Banchet <<a
href="mailto:jaxx@jaxx.org" class=""
moz-do-not-send="true">jaxx@jaxx.org</a>>
wrote:</div>
<br class="Apple-interchange-newline">
<div class="">
<div class="">
<div name="messageBodySection"
style="font-size: 14px; font-family:
-apple-system, BlinkMacSystemFont,
sans-serif;" class="">It went christmas
animation nuts as soon as I plugged it on
the bus (already contact ON+GO), and went
away the second I unplugged it.
<div class=""><br class="">
</div>
<div class="">I admit having left the v2
(which still carries all my profiles, and
in case I needed to limit power+recup on
the way as it’s been snowing again)</div>
<div class=""><br class="">
</div>
<div class="">My bet is that there where too
many CAN terminations on the bus and the
dashboard cluster couldn’t see it’s
friends, I’ll give it a shot without v2 on
my way back home.</div>
<div class="">(Which leads me to believe the
termination resistor on my Arduino OBD
shields aren’t connected)</div>
<div class=""><br class="">
</div>
<div class="">JB./.</div>
</div>
<div name="messageReplySection"
style="font-size: 14px; font-family:
-apple-system, BlinkMacSystemFont,
sans-serif;" class=""><br class="">
On 19 Mar 2018 at 12:43 +0100, Michael
Balzer <<a
href="mailto:dexter@expeedo.de" class=""
moz-do-not-send="true">dexter@expeedo.de</a>>,
wrote:<br class="">
<blockquote type="cite" style="margin: 5px
5px; padding-left: 10px; border-left: thin
solid #34495e;" class="">
<div class="moz-cite-prefix">Uh oh… CAN
bus contact failure? I haven't had any
issues like that…<br class="">
<br class="">
Am 19.03.2018 um 11:09 schrieb Julien
“JaXX” Banchet:<br class="">
</div>
<blockquote type="cite"
cite="mid:23884a86-bed8-441c-9863-c422058e5428@Spark"
style="margin: 5px 5px; padding-left:
10px; border-left: thin solid #2ecc71;"
class="">
<div name="messageBodySection"
style="font-size: 14px; font-family:
-apple-system, BlinkMacSystemFont,
sans-serif;" class="">That didn’t
happen :-)
<div class=""><a
href="https://twitter.com/happyjaxx/status/975675071451844608"
moz-do-not-send="true" class="">https://twitter.com/happyjaxx/status/975675071451844608</a><br
class="">
</div>
</div>
<div name="messageReplySection"
style="font-size: 14px; font-family:
-apple-system, BlinkMacSystemFont,
sans-serif;" class=""><br class="">
On 19 Mar 2018 at 10:07 +0100, Julien
“JaXX” Banchet <a
class="moz-txt-link-rfc2396E"
href="mailto:jaxx@jaxx.org"
moz-do-not-send="true"><jaxx@jaxx.org></a>,
wrote:<br class="">
<blockquote type="cite" style="margin:
5px 5px; padding-left: 10px;
border-left: thin solid #9b59b6;"
class=""><br class="">
<div class="">Gonna put it in the
car (despite the passive GPS
issue)</div>
</blockquote>
</div>
<br class="">
<fieldset class="mimeAttachmentHeader"></fieldset>
<br class="">
<pre class="" wrap="">_______________________________________________
OvmsDev mailing list
<a class="moz-txt-link-abbreviated" href="mailto:OvmsDev@lists.teslaclub.hk" moz-do-not-send="true">OvmsDev@lists.teslaclub.hk</a>
<a class="moz-txt-link-freetext" href="http://lists.teslaclub.hk/mailman/listinfo/ovmsdev" moz-do-not-send="true">http://lists.teslaclub.hk/mailman/listinfo/ovmsdev</a>
</pre>
</blockquote>
<br class="">
<br class="">
<pre class="moz-signature" cols="144">--
Michael Balzer * Helkenberger Weg 9 * D-58256 Ennepetal
Fon 02333 / 833 5735 * Handy 0176 / 206 989 26
</pre>
_______________________________________________<br class="">
OvmsDev mailing list<br class="">
<a
href="mailto:OvmsDev@lists.teslaclub.hk"
class="" moz-do-not-send="true">OvmsDev@lists.teslaclub.hk</a><br
class="">
<a
href="http://lists.teslaclub.hk/mailman/listinfo/ovmsdev"
class="" moz-do-not-send="true">http://lists.teslaclub.hk/mailman/listinfo/ovmsdev</a><br
class="">
</blockquote>
</div>
</div>
_______________________________________________<br
class="">
OvmsDev mailing list<br class="">
<a href="mailto:OvmsDev@lists.teslaclub.hk"
class="" moz-do-not-send="true">OvmsDev@lists.teslaclub.hk</a><br
class="">
<a class="moz-txt-link-freetext"
href="http://lists.teslaclub.hk/mailman/listinfo/ovmsdev"
moz-do-not-send="true">http://lists.teslaclub.hk/mailman/listinfo/ovmsdev</a><br
class="">
</div>
</blockquote>
</div>
<br class="">
</div>
_______________________________________________<br>
OvmsDev mailing list<br>
<a class="moz-txt-link-abbreviated"
href="mailto:OvmsDev@lists.teslaclub.hk"
moz-do-not-send="true">OvmsDev@lists.teslaclub.hk</a><br>
<a class="moz-txt-link-freetext"
href="http://lists.teslaclub.hk/mailman/listinfo/ovmsdev"
moz-do-not-send="true">http://lists.teslaclub.hk/mailman/listinfo/ovmsdev</a><br>
</blockquote>
</div>
<br>
<fieldset class="mimeAttachmentHeader"></fieldset>
<br>
<pre wrap="">_______________________________________________
OvmsDev mailing list
<a class="moz-txt-link-abbreviated" href="mailto:OvmsDev@lists.teslaclub.hk" moz-do-not-send="true">OvmsDev@lists.teslaclub.hk</a>
<a class="moz-txt-link-freetext" href="http://lists.teslaclub.hk/mailman/listinfo/ovmsdev" moz-do-not-send="true">http://lists.teslaclub.hk/mailman/listinfo/ovmsdev</a>
</pre>
</blockquote>
<br>
<br>
<pre class="moz-signature" cols="144">--
Michael Balzer * Helkenberger Weg 9 * D-58256 Ennepetal
Fon 02333 / 833 5735 * Handy 0176 / 206 989 26
</pre>
_______________________________________________<br>
OvmsDev mailing list<br>
<a class="moz-txt-link-abbreviated" href="mailto:OvmsDev@lists.teslaclub.hk">OvmsDev@lists.teslaclub.hk</a><br>
<a class="moz-txt-link-freetext" href="http://lists.teslaclub.hk/mailman/listinfo/ovmsdev">http://lists.teslaclub.hk/mailman/listinfo/ovmsdev</a><br>
</blockquote>
</div>
<br>
<fieldset class="mimeAttachmentHeader"></fieldset>
<br>
<pre wrap="">_______________________________________________
OvmsDev mailing list
<a class="moz-txt-link-abbreviated" href="mailto:OvmsDev@lists.teslaclub.hk">OvmsDev@lists.teslaclub.hk</a>
<a class="moz-txt-link-freetext" href="http://lists.teslaclub.hk/mailman/listinfo/ovmsdev">http://lists.teslaclub.hk/mailman/listinfo/ovmsdev</a>
</pre>
</blockquote>
<br>
<pre class="moz-signature" cols="160">--
Michael Balzer * Helkenberger Weg 9 * D-58256 Ennepetal
Fon 02333 / 833 5735 * Handy 0176 / 206 989 26
</pre>
</body>
</html>